Membrane Technology:
 
01
Kaniganti C. M. , Sriharsha E., Thorat P. and Uppaluri R., (2014). Microfiltration of synthetic bacteria solution using low cost ceramic membranes, Separation Science and Technology, 50(1),121 - 135.
 
02
Sriharsha E., Uppaluri R., and Purkait M. K. (2014). Crossflow microfiltration of oil-water emulsions using kaolin based low cost ceramic membranes, Desalination, 341, 61-71.
 
03
Sriharsha E., Uppaluri R., and Purkait M. K. (2013). Microfiltration of oil-water emulsions using low cost ceramic membranes prepared with uniaxial dry compaction method, Ceramics International, 40 (1), Part A, 1155 - 1164.
 
04
Sriharsha E., Uppaluri R., and Purkait M. K. (2013).  Preparation and Charecterization of Low Cost Ceramic Membranes for Mosambi Juice Clarification, Desalination, 317, 32-40.
 
05
Vasanth D., Pugazenthi G., and Uppaluri R., (2013). Cross-flow Microfiltration of Oil-in-Water Emulsion using Low Cost Ceramic Membranes, Desalination, 320, 86-95.
 
06
D. Vasanth, G. Pugazhenti and R. Uppaluri (2012).  Performance of low cost ceramic microfiltration membranes for the treatment of oil-in-water emulsions, Separation Science and Technology, 48, 1-10.
 
07
D. Vasanth, G. Pugazhenti and R. Uppaluri (2012).  Biomass assisted microfiltration of chromium (VI) using backer's yeast by ceramic membrane prepared from low cost raw materials, Desalination, 285, 239 - 244.
 
08
Nandi B. K., Das B., Uppaluri R. (2012).Clarification of Orange Juice using Ceramic   Membrane and Evaluation of Fouling Mechanism, Journal of Food Process Engineering, 35 (3), 403-423.
 
09
Nandi B. K., Uppaluri R. and Purkait M. K. (2011).  Identification of optimal membrane morphological parameters during microfiltration of mosambi juice using low cost ceramic membranes, LWT-Food science and Technology, 44(1), 214-223.
 
10
Nandi, B.., Das, B., Uppaluri, R., Purkait, M.K., (2009) Microfiltration of Mosambi Juice using Low Cost Ceramic Membrane, Journal of Food Engineering, 95 (4),597 - 605.
 
11
Nandi B. K., Uppaluri R., Purkait M. K. (2010).  Microfiltration of stable oil-in-water emulsions using Kaolin based ceramic membrane and evaluation of fouling mechanism, Desalination and Water Treatment, 22(1-3), 2010, 133-145.
 
12
Nandi B. K., Ajith M., Uppaluri R. and Purkait M. K. (2010), Treatment of Oily Wastewater Using Low Cost Ceramic Membrane: Comparative Assessment of Pore Blocking and Artificial Neural Network Models, Chemical Engineering Research & Design, 88(7), 881-892.
 
13
Nandi B., Uppaluri R. and Purkait M. K., (2009). Treatment of oily waste water using low cost ceramic membrane: Flux decline mechanism and economic feasibility, Separation Science and Technology, 44 (12), 2840 - 2869.
 
14
Vasanth D., Pugazenthi G. and Uppaluri R., (2011).  Fabrication and properties of low cost ceramic microfiltration membranes for separation of oil and bacteria from its solution, Journal of Membrane Science, 379 (1-2), 154-163.
 
15
Vasanth D., Pugazenthi G. and Uppaluri R., (2011).  Influence of sintering temperature on the properties of porous ceramic support prepared by uniaxial dry compaction method using low cost raw materials for membrane applications, Separation Science Technology, 46(8), 1241-1249.
 
16
Nandi B., B. Das, R. Uppaluri, M. K. Purkait, (2010).  Preparation and characterization of inexpensive submicron range inorganic microfiltration membranes, Membrane Water Treatment, 1, 121-137.
 
17
Nandi B., Uppaluri R. and Purkait M. K. (2009).  Effects of dip coating parameters on the morphology and transport properties of cellulose acetate ceramic composite membranes, Journal of Membrane Science, 330(1-2), 246 - 258.
 
18
Nandi B. K., Uppaluri R. and Purkait M.K., (2008).  Preparation and Characterization of Low Cost Ceramic Membranes for Microfiltration Applications, Applied Clay Science, 42(1-2), 102-110.
 
19
Ramagopal U.V.S., Verma N., Bhattacharya P.K. (2002). Analysis of flux decline during Ultrafiltration of Sugarcane Juice (limed) using Cross Flow cell. Canadian Journal of Chemical Engineering, 80(1), 105.
 
20
Ramagopal U.V.S., Agarwal S, De S and Bhattacharya P.K. (2001). Ultrafiltration of sugar cane juice for recovery of sugar: analysis of flux and retention, Separation and Purification Technology, 21(3), 247-259.
Metal composite membranes:
 
01
Pujari M., Amrita A., Uppaluri R., and Verma A.(2014) Combinatorial electroless plating charecteristics for dense Pd-PSS composite membrane fabrication, Materials and Manufacturing Processes ,31(1),6 - 11. 
 
02
Pujari M., Agarwal A., Uppaluri R., and Verma A.(2014)  Efficacy of novel electroless plating processes for dense Pd/Cr2O3/PSS membrane fabrication, Materials and Manufacturing Processes,31(1),1 - 5. 
 
03
Pujari M., Agarwal A., Uppaluri R., and Verma A.(2014).  Role of electroless nickel diffusion barrier on the combinatorial plating characteristics of dense Pd/Ni/PSS composite membranes, Applied Surface Science, 305, 658 - 664.
 
04
Pujari M., Agarwal A., Uppaluri R., and Verma A., (2014). Effect of surfactant concentration and loading ratio on the electroless plating characteristics of dense Pd composite membranes, Industrial and Engineering Chemistry Research, 53 (8), 3105 - 3115.
 
05
Agarwal A., Pujari M., Uppaluri R., and Verma A. (2014). Effiacy of reducing agent and surfactant contacting pattern on the performance characteristics of nickel electroless plating baths coupled with and without ultrasound, Ultrasonics Sonochemistry, 21(4), 1382 - 91.
 
06
Agarwal A., Pujari M., Uppaluri R., and Verma A.,(2013). Optimal Electroless plating rate enhancement techniques for the fabrication of low cost dense nickel/ceramic composite membranes, Ceramics International, 40 (1), Part A, 691-697, 2014.
 
07
Agarwal A., Pujari M., Uppaluri R., and Verma A. (2013). Preparation, Optimization and Characterization of Low Cost Ceramics for the Fabrication of Dense Nickel Composite Membranes, Ceramics International, 39(7), 7709 - 7716.
 
08
Bulasara V. K., Uppaluri R., and Purkait M. K. (2013). Surface Engineering Characteristics of Ultrasound assisted Hypophosphite Electroless Plating baths, Surface Engineering, 29(7), 489 - 494.
 
09
Bulasara V. K., Abhimanyu M.S., Pranav T., Uppaluri R., Purkait M. K. (2012).  Performance characteristics of nickel-ceramic composite membranes fabricated with hydrothermal mass transfer coupled electroless plating baths. Desalination, 284, 77-85.
 
10
Bulasara V. K., Mahesh Babu Ch. S. N., Uppaluri R. (2012). Effect of surfactants on performance of electroless plating baths for nickel-ceramic composite membrane fabrication, Surface Engineering, 28 (1), 44-48.
 
11
Bulasara V. K., Chandrasekhar O., Uppaluri R. (2011).  Effect of surface roughness and mass transfer enhancement on the performance characteristics of nickel-hypophosphite electroless plating baths for metal-ceramic composite membrane fabrication, Chemical Engineering Research and Design, 89 (11), 2485 - 2494.
 
12
Bulasara V. K., Uppaluri R., Thakuria H. and Purkait M. K. (2011). Combinatorial performance characteristics of agitated nickel hypophosphite electroless plating baths, Journal of Material Process Technology, 211(9), 1488-1499.
 
13
Bulasara V. K., Uppaluri R., Thakuria H. and Purkait M. K. (2011). Nickel-ceramic composite membranes: Optimization of hydrazine based electroless plating process parameters, Desalination, 275(1-3), 243-251.
 
14
Bulasara V. K., Uppaluri R. and Purkait M. K. (2012). Effect of Ultrasound on the performance of nickel hydrazine electroless plating baths, Materials and Manufacturing Processes, 27, 201-206.
 
15
Bulasara V. K., Uppaluri R. and Purkait M. K. (2011).  Manufacture of nickel-ceramic composite membranes in agitated electroless plating baths, Materials and Manufacturing Processes, 26(6), 862-869.
 
16
Bulasara V. K., Thakuria H., Uppaluri R. and Purkait M. K. (2011).  Effect of process parameters on electroless plating and nickel-ceramic composite membrane characteristics, Desalination, 268 (1-3), 195-203.
Evolutionary Engineering Optimization:
 
01
Chopade R., Mohan V., Mayank R., Uppaluri R., Mishra S. C., (2012).  Simultaneous retrieval of parameters in a transient conduction-radiation problem using differential evolution algorithm, Numerical Heat Transfer Part A, 63(5), 373 - 395.
 
02
Chopade R. P., Agnihotri E., Singh A. K., Kumar A., Uppaluri R., Mishra S. C. and Mahanta P. (2011), Application of particle swarm algorithm for parameter retrieval in a transient conduction radiation problem, Numerical Heat Transfer Part A, 59(9), 672-692.
 
03
Ajith M., Das R., Uppaluri R., Mishra S. C. (2010).  Boundary heat fluxes in a square enclosure with an embedded design element, Journal of Thermo physics and Heat Transfer, 24(4), 845-849.
04
Das R., Pavan Kumar T. B., Mishra S. C. and Uppaluri R. (2010). An inverse analysis for parameter estimation applied to a non-fourier conduction-radiation problem. Heat Transfer Engineering, 32(6), 455-466.
 
05
Moparthi A., Das R., Uppaluri R. and Mishra S. C. (2009).  Optimization of heat fluxes on the heater and the design surfaces of a radiating-conducting medium, Numerical Heat Transfer Part A, 56 (10), 846 - 860.
 
06
Das R., Mishra S.C. and Uppaluri R. (2009). Inverse analysis applied to parameters and reconstruction of temperature field in a transient conduction-radiation heat transfer problem involving mixed boundary condition, International Communications in Heat and Mass Transfer, 37 (1), 52 -57.
 
07
Das R., Mishra S. C. and Uppaluri R., (2009).  Retrieval of thermal properties in a transient conduction radiation problem with variable thermal conductivity, International Journal of Heat and Mass Transfer, 52 (11-12), 2749 - 2758.
 
08
R. Das., S.C. Mishra and Uppaluri R. (2008).  Simultaneous reconstruction of thermal field and retrieval of parameters in a cylindrical enclosure, Numerical Heat Transfer Part A, 54, 983 - 998.
 
09
R. Das, S.C. Mishra, M. Ajith and R. Uppaluri (2008).  An Inverse Analysis of a Transient Two Dimensional Conduction-Radiation Problem Using the Lattice Boltzmann Method and the Finite Volume Method Coupled with the Genetic Algorithm, Journal of Quantitative Spectroscopy and Radiative Transfer, 109 (11), 2060 - 2077.
 
10
R. Das, S.C. Mishra and R. Uppaluri (2008).  Multi-parameter estimation of in a transient conduction-radiation problem using the lattice Boltzmann method and the finite volume method coupled with the genetic algorithms, Numerical Heat Transfer, Part A, 53 (12), 1321-1338.
 
11
Mishra S. C., Kim M.Y., Das R., M. Ajith and R. Uppaluri, (2009).  Lattice Boltzmann method applied to the analysis of transient conduction-radiation problem in a cylindrical medium, Numerical Heat Transfer Part A, 56, 1-18.
 
12
Uppaluri R., Linke P., Kokossis A.C. Smith R (2006). On the Simultaneous Optimization of Pressure and Network Layout for Gas Separation Membrane Systems, Journal of Membrane Science, 280 (1-2), 832-848.
 
13
Ramagopal V.S. Uppaluri, Linke P., Kokossis A.C., (2004). Synthesis and optimization of membrane networks, Industrial and Engineering Chemistry Research, 43 (15), 4305-4322.
 
14
Ramagopal Uppaluri, Robin Smith, Patrick Linke and Antonis Kokossis, (2002).  Optimal design of gas permeation membrane & membrane adsorption hybrid systems, Computer Aided Chemical Engineering, 10, 367-372.
Polymer-natural fiber composites:
  1. Chattopadhyay, S. K.,  Singh S., Pramanik N., Niyogi U. K., Khandal R. K., Uppaluri R. and Ghoshal A. K., (2011).  Biodegradability Studies on Natural Fibers Reinforced Polypropylene Composites, Journal of Applied Polymer Science, 121(4), 2226-2232.
  2. Chattopadhyay, S. K.; Khandal R. K.; Uppaluri, R.; Ghoshal, A., (2011).  "Bamboo fiber reinforced polypropylene composites and their mechanical, thermal, and morphological properties", Journal of Applied Polymer Science, 119 (3), 1619-1626.
  3. Chattopadhyay, S. K.; Khandal R. K.; Uppaluri, R.; Ghoshal, A., (2010) "Mechanical, thermal, and morphological properties of Maleic Anhydride-g-Polypropylene compatibilized and chemically modified short banana fiber reinforced polypropylene composites", Journal of Applied Polymer Science, 117(3), 1731-1740.
  4. Chattopadhyay, S. K.; Khandal R. K.; Uppaluri, R.; Ghoshal, A., "Infuence of varying fiber lengths on mechanical, thermal, and morphological properties of MA-g-PP compatibilized and chemically modified short pineapple leaf fiber reinforced polypropylene composites", Journal of Applied Polymer Science, 113(6), 3750-3756.
  5. S. Chattopadhyay, U. Hujuri, R. Uppaluri, A. K. Ghoshal (2007), "Effect of Maleic Anhydride Grafted Polypropylene on Mechanical and Morphological Properties of Chemically Modified Short Pineapple Leaf Fibre Reinforced Polypropylene Composites", Journal of Applied Polymer Science, 107 (3), 1507-1516.
Other Areas of Chemical Engineering:
 
Refinery Engineering:
 
01
Bulasara V. K., Uppaluri R. and Banjara V. K. (2010), Optimization of Crude Distillation System using Aspen Plus: Effect of Binary Feed Selection on Grass-root Design, Chemical Engineering Research and Design, 88 (2), 121 - 134.
 
02
Bulasara V. K., Uppaluri R. and Ghoshal A. K. (2009), Revamp study of crude distillation unit heat exchanger network: Energy integration potential of delayed coking unit free hot streams, Applied Thermal Engineering, 29(11-12), 2271 - 2279.
 
03
Saurabh Dhir, R. Uppaluri and Purkait M. K. (2009).   Oxidative Hydrodesulfurization: Kinetic Modeling, Journal of Hazardous Materials, 161, 1360 - 1368.
 
Reservoir Engineering:
 
04
Prem Kumar B., Uppaluri R. and Purkait M. K. (2013). Evaluation of surfactants for the cost effective enhanced oil recovery of Assam Crude Oil Fields, Petroleum Science and Technology, 31(7), 755 - 762.
 
05
Bikkina P. K., Shoham and Uppaluri R., (2011).  Equilibrated Interfacial Tension Data of CO2-Water System at High Pressures and Moderate Temperatures, Journal of Chemical and Engineering Data, 56, 3725-3733.
 
Techno-economics and Process Design:
 
06
Shushil Kumar, Ashish Kalita and Uppaluri R., (2013). Economic Feasibility Study of Sodium Carbonate and Soda Ash Production from Na2SO4, International Journal of Engineering Research and Science & Technology, 2 (1).
 
07
Ajith M., Gill B. S., Uppaluri R. (2010), Economic feasibility of Silica and Palladium Composite Membranes for Industrial Dehydrogenation Reactions, Chemical Engineering Research & Design, 88 (8), 1088 - 1101.
 
Educational Technology:
 
08
Amrita A., Uppaluri R. and Verma A. (2012).  LabVIEW based E-learning Portal for Virtual Mass Transfer Operations Laboratory, CSI Transactions on ICT, Springer,1(1), 75 - 90.
 
09
Agarwal A., Uppaluri R., and Verma A., (2014).  Enhance practical knowledge through virtual mass transfer laboratory, Chemical Industry Digest, February issue, 73 - 76.
 
Bio-systems Engineering:
 
10
Gera N., Uppaluri R., Dasu V.V. and Sen S. (2008).  Growth kinetics and production of glucose oxidase using Aspergillus niger NRRL 326, Chemical and Biochemical Engineering Quarterly, 22 (3), 315 - 320.
                             
Adsorption:
11
Rajesh Y., Pujari M., and Uppaluri R., (2013). Equilibrium and Kinetic studies of Ni (II) adsorption using Pineapple and Bamboo Stem based adsorbents, Separation Science and Technology, 49,533 - 544.
 
12
Cheripally G. S., Mannava A., Kumar G., Gupta R., Saha P., Mandal B., Uppaluri R., Gumma S. and Ghoshal A. K., (2013). Measurement and modelling of adsorption of lower hydrocarbons on activated carbon, Journal of Chemical and Engineering Data,58(6),1606 - 1612.
CO2 Abatement Technology:
13
Aeshala L. M., Verma A., and Uppaluri R., (2013). Effect of Cationic and Anionic Solid Polymer Electrolyte on Direct Electrochemical Reduction of Gaseous CO2 to Fuel, Journal of CO2 Utilization, 3 - 4, 49 - 55.
 
14
Aeshala L. M., Verma A., and Uppaluri R., (2014). Electrochemical conversion of CO2 to fuels: Tuning of reaction zone using suitable functional group in solid polymer electrolyte, Physical Chemistry Chemical Physics,16(33),17588 - 94.