PUBLICATIONS (JOURNALS)
International Journals (in reverse chronological order)

P. Saha, G. Biswas, A.C. Mandal and S. Sarkar, Investigation of coherent structures in a turbulent channel with builtin longitudinal vortex generators, International Journal of Heat and Mass Transfer, Vol. 104, pp. 178198, (2017).

R.K. Arun, P. Singh, G. Biswas, N. Chanda and S. Chakraborty, Energy generation from water flow over a reduced graphene oxide surface in a paper–pencil device, LabonaChip, vol. 16, pp. 35893596, (2016).

R. K. Arun, N. Priyadarshini, K. Chaudhury, N. Chanda, G. Biswas and S. Chakraborty, PaperPDMS hybrid microchannel: a platform for rapid fluidtransport and mixing, J. Micromech. Microeng., Vol. 26, 1050081—1050089, (2016).

V. Pandey, G. Biswas, and A. Dalal, Effect of superheat and electric field on saturated film boiling, Physics of Fluids, Vol. 28, pp. 052102105210218, (2016)

A. Sinha, H. Chattopadhyay, A. K. Iyengar, G. Biswas, Enhancement of heat transfer in a fintube heat exchanger using rectangular winglet type vortex generators, International Journal of Heat and Mass Transfer, Vol. 101, pp. 667–681, (2016)

S. Sarkar, S. Ganguly, G. Biswas and P. Saha, Effect of cylinder rotation during mixed convective flow of nanofluids past a circular cylinder, Computers and Fluids, Vol. 127, pp. 4764 (2016)

A. Hens, K. Mondal, G. Biswas and D. Bandyopadhyay, Pathways from disordered to ordered nanostructures from defect guided dewetting of ultrathin bilayers, Journal of Colloid and Interface Science, Vol. 465, pp. 128–139 (2016)

I.Chakraborty, G. Biswas, S. Polepalle and P.S. Ghoshdastidar, Bubble Formation and Dynamics in a Quiescent HighDensity Liquid, AIChE Journal, Vol. 61, pp. 3996  4012, (2015)

A. Hens , G. Biswas and S. De, Evaporation of water droplets on Ptsurface in presence of external electric field  A molecular dynamics study, The Journal of Chemical Physics, 143, 0947021  09470211, (2015)

P. Randive, A. Dalal, K.C. Sahu, G. Biswas, P. Mukherjee, Wettability effects on contact line dynamics of droplet motion in an inclined channel, Physical Review E, Vol. 91, pp. 0530061 – 05300616, (2015)

S. Biswas, P. Sharma, B. Mondal and G. Biswas, Analysis of Mixed Convective Heat Transfer in a Ribbed Channel using The Lattice Boltzmann Method, Numerical Heat Transfer Part A, Vol. 68, pp. 7598, 2015

B. Ray, G. Biswas and A. Sharma, Regimes during liquid drop impact on a liquid pool, Journal of Fluid Mechanics, Vol. 768, pp. 492523, (2015)

D. Chatterjee and G. Biswas, Dynamic behavior of flow around rows of square cylinders kept in staggered arrangement, Journal of Wind Engineering and Industrial Aerodynamics, Vol. 136, pp. 111, (2015)

P. Saha, G. Biswas and S. Sarkar, Comparison of winglettype vortex generators periodically deployed in a platefin heat exchanger – A synergy based analysis, International Journal of Heat and Mass Transfer, Vol. 74, pp. 292305, (2014)

R.K. Arun, K. Chaudhury, M. Ghosh, G. Biswas, N. Chanda and S. Chakraborty, Controlled splitting and focusing of a stream of nanoparticles in a convergingdiverging microchannel, Lab on a Chip, Vol. 14, pp. 38003008, (2014)

A.Hens, G. Biswas and S. De, Analysis of interfacial instability and multimode bubble formation in saturated pool boiling using Coupled Level Set and Volume of Fluid approach, Physics of Fluids., Vol. 26, pp. 0121051 – 01210514, (2014)

A.Hens, R. Agarwal and G. Biswas, Nanoscale study of boiling and evaporation in a liquid Ar film on a Pt heater using molecular dynamics simulation, International Journal of Heat and Mass Transfer, Vol. 71, pp. 303312 (2014)

S. Sarkar, S. Ganguly and G. Biswas, Buoyancy driven convection of nanofluids in an infinitely long cgannel under the effect of a magnetic field, International Journal of Heat and Mass Transfer, Vol. 71, pp. 328340, (2014)

B. Ray, D. Bandyopadhyay, A. Sharma, S. W. Joo, S. Qian and G. Biswas, Longwave interfacial instabilities in a thin electrolyte film undergoing coupled electrokinetic flows: a nonlinear analysis, Microfluidics and Nanofluidics, Vol. 15, pp. 1933, (2013)

S. P. Singh and G. Biswas, Vortex induced vibrations of a square cylinder at subcritical Reynolds numbers, Journal of Fluids and Structures, Vol. 41, pp. 146155, (2013)

S. P. Singh, G. Biswas and P. Nithiarasu, A numerical study of vortex shedding from a circular cylinder vibrating in the inline direction, International Journal of Numerical Methods for Heat and Fluid Flow, Vol. 23, pp. 1449  1462, (2013)

I. Chakraborty, G. Biswas and P.S. Ghoshdastidar, A coupled levelset and volumeoffluid method for the buoyant rise of gas bubbles in liquids, International Journal of Heat and Mass Transfer, Vol. 58, pp. 240259,(2013).

A. Sinha, K. A. Raman, H. Chattopadhyay and G. Biswas, Effects of different orientations of winglet arrays on the performance of platefin heat exchangers, International Journal of Heat and Mass Transfer, Vol. 57, pp. 202214, (2013).

B. Ray, G. Biswas, A. Sharma, and S.W.J. Welch, CLSVOF method to study consecutive drop impact on liquid pool, International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 23, pp. 143158, (2013)

K. Arul Prakash, B. V. Ratish Kumar and G. Biswas, Parallel numerical simulation of conjugate heat transfer in the target system of an ADS by domain decomposition method, International Journal of Numerical Analysis and Modeling, Series B, 3 (3), 259 – 269, (2012)

B. Ray, G. Biswas and A. Sharma, Bubble pinchoff and scaling during liquid drop impact on liquid pool, Physics of Fluids, Vol. 24, pp. 0821081  08210811, (2012).

A Pal, D. Bandyopadhyay, G. Biswas and V. Eswaran, Enhancement of Heat Transfer Using DeltaWinglet Type Vortex Generators with a Common Flow Up Arrangement, Numerical Heat Transfer Part A, Vol. 61, pp. 912928, (2012).

D. Chatterjee, G. Biswas and S. Amiroudine, Mixed Convection Heat Transfer from an Inline Row of Square Cylinders in CrossFlow at Low Reynolds Number, Numerical Heat Transfer Part A, Vol. 61, pp. 891911, (2012).

S. Sarkar, S. Ganguly and G. Biswas, Mixed Convective Heat Transfer of Nanofluids Past a Circular Cylinder in Cross Flow in Unsteady Regime, International Journal of Heat and Mass Transfer, Vol. 55, pp. 47834799, (2012).

G. Biswas, H. Chattopadhyay and A. Sinha, Augmentation of Heat Transfer by Creation of Streamwise Longitudinal Vortices using Vortex Generators, Heat Transfer Engineering, Vol. 33, pp. 406  424, 2012.

B. Ray, G. Biswas and A. Sharma, Oblique Drop Impact on Deep and Shallow Liquid, Commun. Comput. Phys., Vol. 11, pp. 1386  1396, 2012.

B. Ray, P.D.S. Reddy, D. Bandyopadhyay, S.W. Joo, A. Sharma, S. Qian and G. Biswas, Instabilities in Freesurface Electroosmotic Flows, Theor. Comput. Fluid Dyn., Vol. 26, pp. 311318, 2012.

B. Ray, P.D.S. Reddy, D. Bandyopadhyay, A. Sharma, S. Qian and G. Biswas, Surface Instability of a Thin Electrolyte Film Undergoing Coupled Electroosmotic and Electrophoretic Flows in a Microfluidic Channel, Electrophoresis, Vol. 32, pp. 3257  3267, 2011

S. Sen, S. Mittal, and G. Biswas, Flow past a Square Cylinder at Low Reynolds Numbers, International Journal for Numerical Methods in Fluids, Vol. 67, pp. 1160–1174, 2011.

I. Chakraborty, G. Biswas, and P. S. Ghoshdastidar, Bubble generation in quiescent and coflowing liquids, International Journal of Heat and Mass Transfer, Vol. 54, pp. 46734688, (2011).

A. Patra, D. Bandyopadhyay, G. Tomar, A. Sharma, and G. Biswas, Instability and dewetting of ultrathin solid viscoelastic films on homogeneous and heterogeneous substrates, The Journal of Chemical Physics, Vol. 134, 0647051  06470511, (2011).

D. Chatterjee and G. Biswas, The Effects of Reynolds and Prandtl Numbers on Flow and Heat Transfer Across Tandem Square Cylinders in the Steady Flow Regime, Numerical Heat Transfer, Part A, Vol. 59, pp. 421437, (2011).

S. Sarkar, A. Dalal and G. Biswas, Unsteady wake dynamics and heat transfer in forced and mixed convection past a circular cylinder in cross flow for high Prandtl numbers, Int J Heat Mass Transfer (2011), doi:10.1016/j.ijheatmasstransfer.2011.03.032

S. Jayavel, S. Tiwari, G. Biswas and M. Sen, Kinematics of a fluid particle due to interaction of fixed inviscid vortex filaments in presence of external translation and pulsation, International Journal of Fluid Mechanics Research, Vol. 37, pp.127148, 2010.

B. Ray, G. Biswas and A. Sharma, Generation of secondary droplets in coalescence of a drop at a liquid/ liquid interface, Journal of Fluid Mechanics, Vol. 655, pp. 72104, (2010)

P. Saha and G. Biswas, Assessment of a ShearImproved Subgrid Stress Closure for Turbulent Channel Flows, International Journal of Heat and Mass Transfer,Vol. 53, 48564863 , (2010)

S. Sarkar, A. Dalal and G. Biswas, Mixed Convective Heat Transfer from Two Identical Square Cylinders in Cross Flow at Re=100,International Journal of Heat and Mass Transfer, Vol. 53, pp. 26282642, (2010)

D. Chatterjee, G. Biswas and S. Amiroudine, Numerical simulation of flow past row of square cylinders for various separation ratios, Computers and Fluids, Vol. 39 pp. 4959, (2010)

G. Gandikota, S. Amiroudine, D. Chatterjee and G. Biswas, The Effect of Aiding/ Opposing Buoyancy on TwoDimensional Laminar Flow Across a Circular Cylinder, Numerical Heat Transfer, Part A, , Vol. 58, pp. 385402, (2010)

D. Chatterjee, G. Biswas and S. Amiroudine, Numerical Investigation of Forced Convection Heat Transfer in Unsteady Flow Past a Row of Square Cylinders, International Journal of Heat and Fluid Flow, Vol. 30 pp. 11141128, (2009)

I. Chakraborty, B. Ray, G. Biswas, F. Durst, A. Sharma, and P. S.
Ghoshdastidar, Computational Investigation on Bubble Detachment from Submerged Orifice in Quiescent Liquid under Normal and Reduced Gravity, Physics of Fluids, Vol. 21, pp. 062103106210317, (2009) 
G. Tomar, G. Biswas, A. Sharma and S.W.J. Welch, Influence of Electric Field on Saturated Film Boiling, Physics of Fluids, Vol. 21, 032107 (2009).

G. Biswas and S. Sarkar, Effect of Thermal Buoyancy on Vortex Shedding Past a Circular Cylinder in Cross Flow at Low Reynolds Numbers, International Journal of Heat and Mass Transfer, Vol. 52, pp. 18971912, (2009).

R.M. Bhatnagar, B. Bhattacharya and G. Biswas, Analysis of Pilot Valve and Taper Groove Based Damper, Proceedings of I Mech E London Part C, J. Mechanical Engineering Science, Vol. 223 (C4), pp 859871, (2009).

S. Sen, S. Mittal and G. Biswas, Steady Separated Flow Past a Circular Cylinder at Low Reynolds Numbers, Journal of Fluid Mechanics, Vol. 620, pp. 89119, (2009).

G. Tomar, G. Biswas, A. Sharma and S.W.J. Welch, Multimode Analysis of Bubble Growth in Saturated Film Boiling, Physics of Fluids, Vol. 20, 092101, (2008).

M. Nishi, B. Uensal, F. Durst and G. Biswas, LaminartoTurbulent Transition of Pipe Flows through Puffs and Slugs, Journal of Fluid Mechanics, Vol. 614, pp. 425446, (2008) .

R. Ranjan, A. Dalal and G. Biswas, A Numerical Study of Fluid flow and Heat Transfer around a Square Cylinder at Incidence using Unstructured Grids, Numerical Heat Transfer Part A, Vol. 54, pp. 890913, (2008).

N. Senthil Kumar and G. Biswas, A Finite Element Study of the Onset of Vortex Shedding in a Flow Past Twodimensional Circular Cylinder, Progress in Computational Fluid Dynamics, Vol. 8, pp. 288298, (2008).

A. Dalal, V. Eswaran and G. Biswas, A Finite Volume Method for NavierStokes Equations on Unstructured Meshes, Numerical Heat Transfer Part B, Vol. 54, pp. 238259, (2008).

G. Tomar, D. Gerlach, G. Biswas, N. Alleborn, A. Sharma, F. Durst S. W. J. Welch , and A. Delgado, Twophase Electrohydrodynamic Simulations Using a Volume of Fluid Approach, Journal of Computational Physics, Vol. 227, pp. 12671285, (2007).

S.W.J. Welch and G. Biswas, Direct Simulation of Film Boiling Including Electrohydrodynamic Forces, Physics of Fluids, Vol. 19, 012106, (2007).

G. Tomar, A. Sharma, V. Shenoy and G. Biswas, Surface Instability of Confined Elastic Bilayers: Theory and Simulations, Physical Review E, Vol. 76, 011607, (2007).

S.R. Hiravennavar, E.G. Tulapurkara, G. Biswas, A Note on the Flow and Heat Transfer Enhancement in a Channel with Builtin Winglet Pair, Int. J. Heat and Fluid Flow, Vol. 28, pp. 299305, (2007).

K. Arul Prakash, G. Biswas and B.V. Rathish Kumar, Numerical Prediction of Fluid Flow and Heat Transfer in the Target System of an Axisymmetric Accelerator Driven Subcritical System, Journal of Heat Transfer (ASME), Vol. 129, pp. 582 588, (2007).

G. Tomar, V. Shankar, A. Sharma and G. Biswas, Electrohydrodynamic Instability of a Confined Viscoelastic Liquid Film, Journal of NonNewtonian Fluid Mechanics, Vol. 143, pp. 120130, (2007).

K. Arul Prakash, G. Biswas and B.V. Rathish Kumar, Thermal Hydraulics of the Spallation Target Module of an Accelerator Driven Subcritical System: A Numerical Study, International Journal of Heat and Mass Transfer, Vol. 49, pp. 46334652, (2006).

K. Arul Prakash, G. Biswas and B.V. Rathish Kumar, Numerical Simulation of the Target System of an ADSS, International Journal of Computational Fluid Dynamics, Vol. 20, pp. 513520, (2006).

A. Maheshwari, R.P. Chhabra and G. Biswas, Effect of Blockage on Drag and Heat Transfer from a Single Sphere and an Inline Array of Three Spheres, Powder Technology, Vol. 168, pp. 7483, (2006).

G. Tomar, V. Shankar, S.K. Shukla, A. Sharma, G. Biswas, Instability and Dynamics of Thin Viscoelastic Liquid Films, European Physical Journal E, Vol. 20, pp. 185200, (2006).

K. Arul Prakash, S. De, B.V. Rathish Kumar and G. Biswas, A SUPG Finite Element Study of an ADSS, Finite Element in Analysis and Design, Vol. 42, pp. 11231136, (2006).

Y. Srinivas, G. Biswas, A.S. Parihar and R. Ranjan, LargeEddy Simulation of High Reynolds Number Turbulent Flow Past a Square Cylinder, Journal of Engineering Mechanics (ASCE), Vol. 132, pp. 327335, (2006).

D. Gerlach, G. Tomar, G. Biswas, and F. Durst, Comparison of Volumeof Fluid Methods for Computing Surface TensionDominant TwoPhase Flows, International Journal of Heat and Mass Transfer, Vol. 49, pp. 740754, (2006).

G. Tomar, G. Biswas, A. Sharma and A. Agrawal, Numerical Simulation of Bubble Growth in Film Boiling using CLSVOF Method, , Physics of Fluids, Vol. 17, 112103, (2005).

J. Srikanth, E.G. Tulapurkara and G. Biswas, Large Eddy Simulation of Flow Past BuiltIn WingletPair in a Rectangular Channel, International Journal of Fluid Mechanics Research, Vol. 32, pp. 310326, (2005).

K. Senthil Kumar, E. G. Tulapurkara, G. Biswas and B.H.L. Gowda, Reverse Flow in Channel with Obstruction at Entry, Fluid Dynamics Research, Vol. 37, pp. 387398, (2005).

D. Gerlach, G. Biswas, F. Durst and V. Kolobaric, QuasiStatic Bubble Formation on Submerged Orifices, International Journal of Heat and Mass Transfer, Vol. 48, pp. 425438, (2005).

S. Tiwari, D. Chakraborty, G. Biswas and P.K. Panigrahi, Numerical Prediction of Flow and Heat Transfer in a Channel in the Presence of a Builtin Circular Tube With and Without Integral Wake Splitter, International Journal of Heat and Mass Transfer, Vol. 48, pp. 439453, (2005).

J. M. Shi, D. Gerlach, M. Breuer, G. Biswas and F. Durst, Heating Effect on Steady and Unsteady Horizontal Laminar Flow of Air Past a Circular Cylinder, Physics of Fluids, Vol. 16, pp. 43314345, (2004).

D. Agarwal, S.W.J. Welch, G. Biswas, and F. Durst, Planar Simulation of Bubble Growth in Film Boiling in NearCritical Water Using a Variant of the VOF Method, Journal of Heat Transfer (ASME), Vol. 126, pp. 329338, (2004).

G. Biswas, M. Breuer and F. Durst, BackwardFacing Step Flows for Various Expansion Ratios at Low and Moderate Reynolds Numbers, Journal of Fluids Engineering (ASME), Vol. 126, pp. 362374, (2004).

A.K. Saha, K. Muralidhar and G. Biswas, Investigation of Twoand Three Dimensional Models of Transitional Flow Past a Square Cylinder, Journal of Engineering Mechanics (ASCE), Vol. 129, pp. 13201329, (2003).

S. Tiwari, G. Biswas, P.L.N. Prasad and S. Basu, Numerical Prediction of Flow and Heat Transfer in a Rectangular Channel with a Builtin Circular Tube, Journal of Heat Transfer (ASME), Vol. 125, pp. 413421, (2003).

S. Tiwari, P.L.N. Prasad and G. Biswas, A Numerical Study of Heat Transfer in FinTube Heat Exchangers using WingletType Vortex Generators in CommonFlowDown Configuration, Progress in Computational Fluid Dynamics, Vol. 3, pp. 3241, (2003).

T. Cziesla, H. Chattopadhyay, N.K. Mitra and G. Biswas, Prediction of Heat Transfer from Impinging KnifeJets Using a Dynamic Subgrid Stress Model, Progress in Computational Fluid Dynamics, Vol. 3, pp. 2231, (2003).

S. Tiwari, D. Maurya, G. Biswas and V. Eswaran, Heat Transfer Enhancement in Crossflow Heat Exchangers using Oval Tubes and Multiple Delta Winglets, International Journal of Heat and Mass Transfer, Vol. 46, pp. 28412856, (2003).

V. Prabhakar, G. Biswas, V. Eswaran, Numerical Prediction of Heat Transfer in a Channel with a Builtin Oval Tube and Various Arrangement of the Vortex Generators, Numerical Heat Transfer, Part A, Vol. 44, pp. 315333, (2003).

V. Kumar, G. Biswas, G. Brenner and F. Durst, Effect of Thermocapillary Convection in an Industrial Czochralski Crucible: Numerical Simulation, International Journal of Heat and Mass Transfer, Vol. 46, pp. 16411652, (2003).

A.K. Saha, G. Biswas and K. Muralidhar, Threedimensional Study of Flow Past a Square Cylinder at Low Reynolds Numbers, Int. J. Heat and Fluid Flow, Vol. 24, pp. 5466, (2003).

A. Jain, G. Biswas, D. Maurya, Winglet Type Vortex Generators with CommonFlowUp Configuration for FinTube Heat Exchangers, Numerical Heat Transfer, PartA, Vol. 43, pp. 201219, (2003).

H. Chattopadhyay, G. Biswas, and N.K. Mitra, Heat Transfer from a Moving Surface due to Impinging Slot Jets, Journal of Heat Transfer (ASME), Vol. 124, pp. 433440, (2002).

V. Prabhakar, G. Biswas, V. Eswaran, Numerical Prediction of Heat Transfer with a Builtin Oval Tube and Two Different Shaped Vortex Generators, Numerical Heat Transfer, Part A, Vol. 41, pp. 307329, (2002).

A.K. Saha, G. Biswas, and K. Muralidhar, TwoDimensional Study of the Turbulent Wake Behind a Square Cylinder Subject to Uniform Shear, Journal of Fluids Engineering (ASME), Vol. 123, pp. 595603, (2001).

T. Cziesla, G. Biswas, H. Chattopadhyay and N.K. Mitra, LargeEddy Simulation of Flow and Heat Transfer in an Impinging Slot Jet, Int. J. Heat and Fluid Flow, Vol. 22, pp. 500508, (2001).

P. Sandilya, D.P. Rao, A. Sharma and G. Biswas, GasPhase Mass Transfer in a Centrifugal Contractor, Ind. Eng. Chem. Res., Vol. 40, pp. 384392, (2001).

P. Sandilya, G. Biswas, D.P. Rao and A. Sharma, Numerical Simulation of the Gas Flow and Mass Transfer Between Two Coaxially Rotating Disks, Numerical Heat Transfer, Part A, Vol.39, pp. 285305, (2001).

R. Vasudevan, V. Eswaran and G. Biswas, Winglet Type Vortex Generators for PlateFin Heat Exchangers Using Triangular Fins, Numerical Heat Transfer, Part A, Vol.38, pp. 533555, (2000).

A.K. Saha, K. Muralidhar,and G. Biswas, Experimental Study of Flow Past a Square Cylinder at high Reynolds Numbers, Experiments in Fluids, Vol. 29, pp. 553563, (2000).

P.K. Maji and G. Biswas, Analysis of Flow in the Plate Spiral of a Reaction Turbine Using a Streamline Upwind PetrovGalerkin Method, International Journal for Numerical Methods in Fluids, Vol. 34, pp. 113 144, (2000).

A.K. Saha, K. Muralidhar,and G. Biswas, Transition and Chaos in TwoDimensional Flow Past a Square Cylinder, Journal of Engineering Mechanics (ASCE), Vol. 126, pp. 523532, (2000).

A.K. Saha, G. Biswas and K. Muralidhar, Numerical Study of the Turbulent Unsteady Wake Behind a Partially Enclosed Square Cylinder using RANS, Computer Methods in Applied Mechanics and Engineering, Vol. 178, pp. 323341, (1999).

T. Cziesla, G. Biswas and N.K. Mitra, Large Eddy Simulation in a Turbulent Channel Flow Using Exit Boundary Conditions, International Journal for Numerical Methods in Fluids, Vol. 30, pp. 763773, (1999).

P.K. Maji and G. Biswas, Analysis of Flow in the Spiral Casing Using a Streamline Upwind PetrovGalerkin Method, International Journal for Numerical Methods in Engineering, Vol. 45, pp. 147174, (1999).

A.K. Saha, G. Biswas, and K. Muralidhar, Influence of Inlet Shear on the Structure of Wake behind a Square Cylinder, Journal of Engineering Mechanics (ASCE) Vol. 125, pp. 359363, (1999).

A.K. Saha, K. Muralidhar,and G. Biswas, Vortex Structures and Kinetic Energy Budget in TwoDimensional flow Past a Square Cylinder, Computers and Fluids, Vol. 29, pp. 669694, (2000).

A.A. Bastani Jahromi, N.K. Mitra and G. Biswas, Numerical Investigations on Enhancement of Heat Transfer in a Compact Finand Tube Heat Exchanger Using Delta Winglet Type Vortex Generators, Enhanced Heat Transfer, , Vol. 6, pp. 111, (1999).

S. Singh, G. Biswas, and A. Mukhopadhyay, Effect of Thermal Buoyancy on the Flows through a Vertical Channel with a Builtin Circular Cylinder, Numerical Heat Transfer, Part A, Vol. 34, pp. 769789, (1998).

P.K. Maji and G. Biswas, Threedimensional Analysis of Flow in the Spiral Casing of a Reaction Turbine using a Differently Weighted Petrov Galerkin Method, Computer Methods in Applied Mechanics and Engineering, Vol. 167, pp. 167190, (1998).

G. Biswas, V. Eswaran, G. Ghai and A. Gupta, A Numerical Study on Flow Through the Spiral Casing of a Hydraulic Turbine, International Journal for Numerical Methods in Fluids, Vol. 28, pp. 143156, (1998).

B.L. Owsenek, T. Cziesla, N.K. Mitra and G. Biswas, Numerical Investigation of Heat Transfer in Impinging Axial and Radial Jets with Superimposed Swirl, International Journal of Heat and Mass Transfer, Vol. 40, pp. 141147, (1997).

H. Laschefski, T. Cziesla, G. Biswas and N.K. Mitra, Numerical Investigation of Heat Transfer by Rows of Rectangular Impinging Jets, Numerical Heat Transfer, Part A, Vol. 30, pp. 87 101, (1996).

G.Biswas, K.Torii, D.Fujii and K.Nishino, Numerical Experimental Determination of Flow Structure and Heat Transfer Effects of Longitudinal Vortices in a Channel Flow, International Journal of Heat and Mass Transfer, Vol. 39, pp. 34413451, (1996).

P.Deb, G.Biswas and N.K.Mitra, Heat Transfer and Flow Structure in Laminar and Turbulent Flows in a Rectangular Channel with Longitudinal Vortices, International Journal of Heat and Mass Transfer, Vol. 38, pp. 24272444, (1995)

S. Chakraborty, S.P.Sengupta and G. Biswas, Fluid Flow and Transfer in a Laminar Radial Impinging Jet, Int. Journal of Numerical Methods for Heat and Fluid Flow, Vol. 4, pp. 173185, (1994)

F.Potthast, H.Laschefski, N.K.Mitra and G.Biswas, Numerical Investigation of Flow Structure and Mixed Convection Heat Transfer of Impinging Radial and Axial Jets, Numerical Heat Transfer,PartA, Vol. 26, pp. 123140, (1994)

G.Biswas, N.K.Mitra and M. Fiebig, Heat Transfer Enhancement in FinTube Heat Exchangers by Winglet Type Vortex Generators, International Journal of Heat and Mass Transfer, Vol.37, pp. 283291, (1994)

G. Biswas, P. Deb and S. Biswas, Generation of Longitudinal Streamwise Vortices  A Device for Improving Heat Exchanger Design, Journal of Heat Transfer (ASME), Vol. 116, pp. 588597, (1994)

A. Mukhopadhyay, T.Sundararajan and G.Biswas, An Explicit Transient Algorithm for Predicting Incompressible Viscous Flows in Arbitrary Geometry, International Journal for Numerical Methods Fluids, Vol. 17, pp. 975993, (1993)

A. Mukhopadhyay, G.Biswas and T.Sundararajan, Numerical Investigation of Confined Wakes Behind a Square Cylinder in a Channel, International Journal for Numerical Methods in Fluids, Vol. 14, pp. 14731484, (1992)

G.Biswas and H.Chattopadhyay, Heat Transfer in a Channel Flow with Builtin WingType Vortex Generators, International of Journal Heat and Mass Transfer, Vol. 35, pp. 803814, (1992)

G.Biswas, H.Laschefski, N.K.Mitra and M.Fiebig, Numerical Investigationof Mixed Convection Heat Transfer in a Horizontal Channel with a Builtin Square Cylinder, , Numerical Heat Transfer  Part A, Vol. 18, pp. 173188,(1990)

G.Biswas, N.K.Mitra and M. Fiebig, Computation of Laminar Mixed Convection Flow in a Channel with WingType Builtin Obstacles, AIAA Journal of Thermophysics and Heat Transfer, Vol. 3, pp. 447453, (1989)

G.Biswas, N.K.Mitra and M.Fiebig, Mixed Convection Flows in a Channel with a Vortex Generator, ZAMM, Vol. 69, issue 6, pp. T 643 645, (1989)

G.Biswas and A.S.Gupta, Spreading of nonNewtonian Liquid Drop a Horizontal Plane, Mechanics Research Communications, Vol. 14, pp. 361370, (1987)

P.Mukherjee, G.Biswas and P.K.Nag, Second Law Analysis of Heat in Swirling Flow through a Cylindrical Duct, Journal of Heat Transfer (Trans ASME), Vol. 109, pp. 308313,(1987)

G.Biswas, P.K.Nag and A.S.Gupta, Heat Transfer in a Corner Flow, Warme und Stoffubertragung (Heat and Mass Transfer), Vol. 21, pp. 1314,(1987)

S.K.Som and G.Biswas, Dispersion of Spray from Swirl Nozzles, Chemical Engineering and Processing, Vol. 20, pp. 191200, (1986)

G.Biswas and S.K.Som, Coefficient of Discharge and Spray Cone Angle of a Pressure Nozzle with Combined Axial and Tangential Entry of PowerLaw Fluids, Applied Sci Res, Vol. 43, pp. 322, (1986)

G.Biswas, S.K.Som and A.S.Gupta, Instability of a Moving Liquid Sheet, Journal of Fluids Engineering (ASME), Vol. 107, pp. 451454, (1985)

S.K.Som and G.Biswas, Convective Heat Transfer in a Streaming and Swirling Flow Through a Cylindrical Duct, Warme und Stoffubertragung (Heat and Mass Transfer), Vol. 19, pp. 3139, (1985)

S.K.Som and G.Biswas, Initiation of Air Core in a Swirl Nozzle Using TimeIndependent PowerLaw Fluids, Acta Mechanica, Vol. 51, pp. 179197, (1984)
Monograph

T. Cziesla, H. Braun. G. Biswas and N.K. Mitra, Large Eddy Simulation in a Channel with Exit Boundary Conditions, ICASE No. 9618, NASA Contract No. NASI19480, Langley Research , Hampton, Virginia, USA, (1996).

G. Biswas, Variant of a volumeoffluid method for surface tensiondominant twophase flows, Sadhana, Vol. 38, pp. 1127–1133, (2013)

K Arul Prakash, B V Rathish Kumar and G Biswas, A Numerical Study of the Target System of an ADSS with Different Flow Guides, PRAMANA, Vol. 68, pp. 365376, (2007).

G. Biswas, Heat Transfer and Fluid Mechanics Related to Turbulent Flow, Annals of the Indian National Academy of Engineering, Vol. II, pp. 1925, (2005).

G.Biswas and P. Deb, Heat Transfer and Flow Structure in a Turbulent Channel Flow with Embedded Longitudinal Vortices, Journal of Energy Heat and Mass Transfer, Vol. 22, pp. 141148, (2000).

A.K.Saha, and G.Biswas, Application of a Multigrid Method for Flows Behind Bluff Bodies in a Channel, Journal of Institution of Engineers (Aerospace), Vol. 77, pp 1321, (1996). The Paper was given THE AEROSPACE ENGINEERING DIVISION MEDAL, 199798.

H. Chattopadhyay and G.Biswas, Augmentation of Heat Transfer Using WingType Vortex Generators, Journal of Energy Heat and Mass Transfer, Vol. 15, pp 325330,(1993).

G.Biswas, N.K.Mitra, and M.Fiebig, Computation of Laminar Mixed Convection Flows in a Duct with a Builtin Wing Generator, Journal of Energy Heat and Mass Transfer, Vol. 13, pp 4755, (1991).

A.K.Chattopadhyay, D.N.Roy and G.Biswas, Radial Flow of a Viscous Fluid Between Two Coaxially Rotating Discs, Indian Journal of Technology, Vol. 29, pp 221227, (1991).

G.Biswas and S.G.Mukherjee, An Investigation on the Abrasive Properties of Low Grade Solid Fuels for Power Generation, J.Inst.of Engg., Vol. 64, ME 4, pp 154158, (1984).

G. Biswas, Some Aspects of Bubble Growth in Film Boiling Using a variant of VolumeofFluid Method, IIT Kanpur Golden Jubilee IndoUS Conference on Fabrionics: Science of Advanced Fabrication, IIT Kanpur December 912, 2010.

G. Biswas, Largeeddy Simulation of Turbulent Channel Flow by Shearimproved Smagronisky Model, IIT Kanpur Golden Jubilee International Conference on Turbulence, December 2123, 2010.

I. Chakraborty, G. Biswas and P.S. Ghoshdastidar, The Dynamics of Gas Bubbles in a Coflowing Liquid Ambience, Paper ID: 214, Proceedings of the 20th National and 9 th International ISHMT ASME Heat and Mass Transfer Conference, Mumbai, January 46, pp. 801 807, doi:10.3850/9789810838133 214, 2010.

B. Ray, G. Biswas and A. Sharma, Bubble Entrapment Phenomena in Liquids, Paper ID: 252 , Proceedings of the 20th National and 9 th International ISHMT ASME Heat and Mass Transfer Conference, Mumbai, January 46, pp. 937942, doi:10.3850/9789810838133 252, 2010.

P. Saha and G. Biswas, Numerical Analysis of Turbulent Flow and Heat Transfer in a Channel with Longitudinal Vortex Generators using LES, Paper ID: 349, Proceedings of the 20th National and 9 th International ISHMT ASME Heat and Mass Transfer Conference, Mumbai, January 46, pp. 1337  1341, doi:10.3850/9789810838133 349, 2010.

G. Biswas, Prediction of Bubble Growth in Film Boiling using a Variant of VolumeofFluid Method, University of Western Ontario, Research Seminar of the Faculty of Engineering, June 24, 2008

A. Dalal, V. Eswaran and G. Biswas, Natural Convection around a Heated Square Cylinder placed in Different Angles inside an Enclosure, 8th ISHMT ASME Heat and Mass Transfer Conference, January 35, JNTU. Hyderabad, India, 2008

G. Tomar, G. Biswas, S.W.J. Welch and A. Sharma, Multimode Analysis of Bubble Growth in Saturated Film Boiling, 8th ISHMT ASME Heat and Mass Transfer Conference, January 35, JNTU. Hyderabad, India, 2008

K. Arul Prakash, B. V. Rathish Kumar and G. Biswas, Numerical Simulation of Thermal Hydraulics in an ADSS Model, Proc Appl. Math. Mech. (PAMM), 21500252150026, (2007)/ DOI 10.1002/pamm.200700649

G. Tomar, G. Biswas and A. Sharma, Analysis of Formation of Vapor Columns in Flim Boiling (IMECE200741124), Proceedings of IMECE 2007, 2007 ASME International Mechanical Engineering Congress and Exposition, November 1115, Seattle, USA, 2007.

Educational Environment in India: A Review Invited talk (coauthored with S.G. Dhande) at the 10th KAST International Symposium on Interdisciplinary Education for Science and Technology Innovation, September 1314, Seoul, Korea, 2007.

K. Arul Prakash, B. V. Rathish Kumar and G. Biswas, Numerical Study of Natural Convection in the Spallation Target Module of an Accelerator Driven SubCritical System, 33rd National and 3rd International Conference on Fluid Mechanics and Fluid Power, paper number 1414, IIT Bombay, December 79, 2006.

G. Tomar , G. Biswas and A. Sharma, A Comparison of VOF and CLSVOF Method for Predicting Surface Tension Dominated TwoPhase Flows, 33rd National and 3rd International Conference on Fluid Mechanics and Fluid Power, paper number 1417, IIT Bombay, December 79, 2006.

M. K. Radle, E.G. Tulapurkara and G. Biswas, Large Eddy Simulation of Flow Past Square Cylinder with Fine Grid, 33rd National and 3rd International Conference on Fluid Mechanics and Fluid Power, paper number 1308, IIT Bombay, December 79, 2006.

G. Biswas, LargeEddy Simulation of Flows Concerning Impinging Jets and Bluff Body Wakes, (Invited Talk), Proceedings of the Eleventh Asian Congress of Fluid Mechanics (11ACFM), pp. 5665, May 2225, 2006, Kuala Lumpur, Malaysia.

A. Agrawal, G. Biswas, S.W.J. Welch and F. Durst, Prediction and Analysis of the Bubble Formation in Film Boiling, IMECE2004, Vol.1 (ISBN: 0791841782), November 1319, 2004, Anaheim, California, USA.

G. Biswas, Analysis of Bubble Formation in Film Boiling, INVITED TALK, FLUENT CFD Conference for India and South East Asia, Pune, India, November 1820, 2003.

K. Senthil Kumar, E.G. Tulapurkara and G. Biswas, 2D LES Flow Past a Square Cylinder, Second International and Twenty Ninth National Conference on Fluid Mechanics and Fluid Power, Roorkee, pp. 417421, 2002.

D. Maurya, S. Tiwari, G. Biswas, V. Eswaran and A.K. Saha, Numerical Prediction of Enhanced Heat Transfer using Oval Tubes and Delta Winglets, IMECE200234406, New Orleans, USA, 2002.

V. Kumar, G. Biswas, G. Brenner and F. Drust, Numercial Investigation on the Effect on Marangoni Convection in an Industrial Czochralski Crucible, IMECE200233719, New Orleans, USA, 2002.

G. Biswas, Enhancement of Heat Transfer Using Longitudinal Vortices, Kynote Lecture at the 12 th International Heat Transfer Conference at Grenoble, France, August 1823, 2002, 07KNL01, Published in Heat Transfer 2002 (Vol. 1, pp. 257).

G. Biswas and T. Cziesla, Largeeddy Simulation of Impinging Jets at Moderate Reynolds Numbers (Invited Talk) International Symposium on Recent Trends in Heat and Mass Transfer, IIT Guwahati, January 68, 2002.

V. Prabhakar, G. Biswas, V. Eswaran and S. Tiwari, Numerical Prediction of Heat Transfer in a Channel with a Builtin Oval Tube and Vortex Generators, Proceedings of the Fifth ISHMTASME Joint Heat and Mass Transfer Conference, 2002.

S. Basu, V. Eswaran and G. Biswas, Numerical Prediction of Flow and Heat Transfer in a Rectangular Channel with a Builtin Circular Tube, Proceedings of the IMECE, HTD24115, pp. 113, New York, 2001.

M. Singh, P.K. Panigrahi and G. Biswas, Flow Characteristics in a ThreeDimensional Rectangular Channel with a Pair of Ribs Placed Symmetrically at the Channel walls, Proceedings of the HTD, IMECE, Orlando, USA, Vol. 3663, pp.7987, 2000.

G. Biswas, and N.K. Mitra, Use of Organized Vortices for Improved performance of Heat Exchanger Surfaces: Numerical Approach, Fourth ISHMT ASME Joint Heat and Mass Transfer Conference, Pune, Januray 1214, 2000. (Invited Lecture)

G. Biswas, Large Eddy Simulation of Turbulence: Some Applications, International Conference on Challenges and New Directions in Computation of Internal Flows, IIT Madras, January 57, 2000. (Invited Lecture)

T. Cziesla, N.K. Mitra and G. Biswas, Numerical Investigation of Turbulent Heat Transfer by Impinging Jets, 11 th International Heat Transfer Conference, Kyongju, Korea, Vol. 4, pp. 241245, 1988.

G. Biswas and N.K. Mitra, Longitudinal Vortex Generators for Enhancement of Heat Transfer in Heat Exchanger Applications, 11 th International Heat Transfer Conference, Kyongju, Korea, Vol. 5, pp. 339344, 1988.

A.K. Saha, K. Muralidhar and G. Biswas, Measurements in the Near Wake Behind a Square Cylinder at High Reynolds Numbers, 25th National and 1st International FMFP Conference, IIT Delhi, New Delhi, pp 668677, 1998.

A.K. Saha, G. Biswas and K. Muralidhar, Computation of ThreeDimensional Flow Past a Square Cylinder, The Seventh Asian Congress of Fluid Mechanics, IIT Madras, Chennai, pp 395398, 1998

A.K. Saha, G. Biswas and K. Muralidhar, Computation of Ensemble Averaged Characteristics of Turbulent Wake behind a Partially Enclosed Square Cylinder using RANS, Third Asian CFD Conference, Bangalore, pp 360365, 1998.

S.K. Bhadra, G. Biswas and K. Muralidhar, Reconstruction of the Temperature Field in RayleighBenard Convection in a Cavity using Interferometry, Proceedings of the Third ISHMTASME Joint Heat and Mass Transfer Conference, IIT Kanpur, pp 752, (1997).

K. Veerabathra Swamy, G. Biswas and K. Venkatraman, Numerical Investigation of Heat Transfer and Control of Vortex Shedding in Wake of a Circular Cylinder, Proceedings of the Third ISHMTASME Joint Heat and Mass Transfer Conference, IIT Kanpur, pp 696, (1997).

K. Torii, P.M.V. Subbarao and G. Biswas, Experimental Study on Enhancement of Heat Transfer Due to Longitudinal Vortices in a Channel, Proceedings of the Third ISHMTASME Joint Heat and Mass Transfer Conference, IIT Kanpur, pp 395400, (1997).

P. Sandilya, G. Biswas and A. Sharma, Gasphase Controlled Absorption for Countercurrently Flowing Gas and Liquid Between Two Disks, Proceedings of the Third ISHMTASME Joint Heat and Transfer Conference, IIT Kanpur, pp 341346, (1997).

A.K. Saha, G. Biswas and K. Muralidhar, Effect of Inlet Shear on Vortex Shedding and Wake Structure Behind a Square Cylinder, Int Conf on Advances in Mechanical and Industrial Engineering, Univ Roorkee, pp 427434, February, 1997.

P. Sandilya, G. Biswas and A. Sharma, Effect of Co current and Countercurrent Flow of A Gas and A Liquid Between Two Rotating Disks on GasPhase Controlled Absorption, Proc Int Conf on in Chemical Engineering, pp 119124, IIT Madras , Dec, 1996.

A.K.Saha, K. Muralidhar and G. Biswas, Comparison of Numerical and Experimental Studies of Flow Past a Square Cylinder, Proc. of The Ninth International Symposium on Transport Phenomna, Singapore, pp 327332, 1996.

G.Biswas and P.Deb, Heat Transfer and Flow Structure in a Turbulent Channel Flow with Embedded Longitudinal vortices, Proc. of the Second ISHMTASME Joint Heat and Mass Transfer Conefrence, pp 211216, 1995.

P.Deb, G.Biswas and N.K.Mitra, Vortex Structure and Heat Transfer in a Rectangular Channel in the Presence of DeltaWinglets, Proceedings of the Tenth International Heat Transfer Conference, Brighton, Vol. 7, pp 227232, 1994.

G.Biswas , N.K.Mitra and M.Fiebig, Numerical Prediction of Heat Transfer in a Flow Around Builtin Circular Obstacle and Generators in a Channel, Proceedings of the First ISHMTASME Joint Heat and Mass Transfer Conference  BARC Bombay , pp 535540, 1994.

G.Biswas and N.K.Mitra, Numerical Investigation of Heat Transfer and Flow Loss in a FinTube Heat Exchanger Element with Longitudinal Vortex Generators, Proc. of the Eurotherm 31  Bochum, pp 215223, May 1993.

G.Biswas, N.K.Mitra, M.Fiebig, and J.S.Cornelius, Numerical Investigation of Laminar Mixed Convection Flows in Rectangular Horizontal Ducts, Proc. of the Ninth International Heat Transfer Conference , Jerusalem, Vol. 2, pp 435439, 1990.

S.Chakraborty, S.P.Sengupta, and G.Biswas, Heat Transfer in a Laminar Radial Impinging Jet, Proc. of the Ninth International Heat Transfer Conference, Jerusalem, Vol. 4, pp 181186, 1990.

G.Biswas, N.K.Mitra, and M.Fiebig, Influence of Buoyancy on Structure of Laminar Wakes of Partially Enclosed Bodies, The Fourth Asian Congress of Fluid Mechanics, Hong Kong, pp A276A279, 1990.

G.Biswas,T.Pelster,J.S.Cornelius,N.K.Mitra and M.Fiebig, Three Dimensional Computation of Laminar Mixed Convection Flows in a Horizontal Rectangular Duct with a uniformly Heated Bottom Wall, Proc. of the 6th International Conference on Numerical Methods for Thermal Problems, Swansea, UK, Vol. VI , Part 2, pp 17211731,1989.

G.Biswas, N.K.Mitra and M.Fiebig, NavierStokes Computations of Three Dimensional Laminar Flows with Buoyancy in a Channel with Type Vortex Generators, Advances in Fluid Dynamics, edited by .F.Ballhaus Jr. and M.Y.Hussani, Springer Verlag, pp 1124, 1989.

G. Biswas, N.K.Mitra and M.Fiebig, Computation of Laminar Mixed Convection Flow in a Rectangular Duct with WingType Builtin Obstacles, AIAA Paper No. 882647, AIAA Thermophysics and Lasers Conference, San AntonioTexas,USA, June29, 1988.

G. Biswas, H.Laschefski, N.K.Mitra and M.Fiebig, Numerical Solution of Forced and Mixed Convection Heat Transfer in a Channel with Builtin Obstacle, International Heat and Mass Transfer Forum, A.V.Luikov Heat and Mass Transfer Inst, Minsk, Vol. 2, pp 2236, May,1988.

G. Biswas, N.K.Mitra and M. Fiebig, Mixed Convection Flows in a Channel with a Vortex Generator, GAMM Conference , TU Vienna, 59 April, 1988.

G. Biswas, Understanding Vapor and Air bubbles, CNR Rao Lecture at IIT Kanpur, February 25, 2010.

G. Biswas, Understanding Drops, Twentyfirst Midyear Meeting, Indian Academy of Sciences, Bangalore, July 2 \96 3, 2010

Analysis of Bubble Growth in Film Boiling Using a Variant of Volume of Fluid Method, BRNSINS Symposium on Multiphysics Modeling for Current and Future Nuclear Reactors, BARC, Mumbai, November 34, 2008

G. Tomar, G. Biswas and A. Sharma, Prediction of bubble growth in film boiling using a variant of coupled levelset and volumeoffluid method, 2nd Joint Workshop NTUSIITK Workshop in Mechanical, Aerospace, Industrial and Management Engineering, IIT Kanpur, April 56, 2008

G. Biswas, Modeling of Free Surface Flows with a Focus on the Analysis of Bubble Formation in Film Boiling, Bhatnagar Memorial Lecture (lecture only) at the Congress of Indian Society of Theoretical and Applied Mechanics (ISTAM), BNM Institute of Technology, Bangalore, December 1416, 2007.

G. Biswas, Invited talk (CMERI Golden Jubilee Lecture Series, lecture only) Mathematical Analysis of Turbulent Flows for Practical Applications, CMERI, Durgapur, December 3, 2007

G. Biswas and G. Tomar, Modeling of Free Surface Flows and Bubble Formation in Film Boiling (lecture only), Invited Talk, National Workshop: CFD Approach on Fluid Flow, Heat and Mass Transfer, IIT Roorkee, April 1213, 2007.

G. Biswas, Mathematical Modelling of Turbulence, (lecture only) National Conference on CFD Applications in Power and Industry Sectors organized by the Corporate Research and Development of BHEL, Hyderabad, November 1718, 2006.

G. Biswas, Some Aspects of Kaleidoscopic Flow Past a Square Cylinder, Aswathanarayana Honorary Lecture, 32nd National Conference on Fluid Mechanics and Fluid Power, Osmanabad, India, HL1121, 1517 December, 2005.

G. Biswas, Some Aspects of the Mathematical Models of Turbulent Flows, Invited Talk at the 6th Annual CFD Symposium (In honour of Prof. S.M. Deshpande), Bangalore, India, August 1113, 2003.

G. Biswas, Longitudinal Vortices and Enhanced Heat Transfer: Analysis of Flow and Transport Rate (Invited Talk), Proceedings of the Sixteenth National Convention of Mechanical Engineers, University of Roorkee, Vol. 2, pp. 885896, 2000.

A K Saha,K. Muralidhar and G. Biswas, Transition to Chaos in Two Dimensional Flow Past a Square Cylinder, National Conference on Fluid Mechanics and Fluid Power, IIT Kharagpur, December 1517, 1999. The Paper was given the BEST PAPER AWARD, M.G. DESHPANDE MEMORIAL PRIZE.

G. Biswas, A K Saha and K. Muralidhar, Invited Lecture on Large Eddy Simulation of Turbulence, Workshop on RANS, LES and , Dept of Aerospace Engineering, Indian Institute of Science, Bangalore, November 1112, 1997.

G. Biswas and P.K. Maji, Invited Lecture on Incompressible Navier Stokes Solvers, DRDLCFD96, Hyderabad, (1996).

G. Biswas and K. Muralidhar, Fundamentals and Modeling of Turbulent Flow, Invited Lecture , pp 2534, Proceedings of the Transport Phenomena in Metallurgical Processes96, National Metallurgical LaboratoryJamshed pur, (1996).

M.Sarkar, G.Biswas and T.Sundararajan, Simulation of Velocity and Temperature Fields in a Communicating Channel. 38th Congress of Indian Society of Theoretical and Applied MechanicsKharagpur, Lecture MF35 (paper was presented only ), (1993).

H. Chattopadhyay and G.Biswas, Augmentation of Heat Transfer Using WingType Vortex Generators, Proc. of the 11th National Heat and Mass Transfer Conference, Indian Institute of Technology Madras, December 2123, (1991).

S.Chakraborty and G.Biswas, Heat Transfer in Radial Jet Reattachment Flow, National Workshop on Trends in Mechanical Education and Research, Indian Institute of Technology, Kharagpur, 26.126.14, (1989).

G.Biswas, N.K.Mitra and M.Fiebig, Numerical Flow Visualization and Structure of Wakes Behind a BluffBody in a TwoDimensional Duct, Proc. of the XI National Conference on IC Engines and , Indian Institute of Technology, Madras, pp 10491056, 1115, (1989).

G.Biswas, N.K.Mitra and M. Fiebig, Computation of Laminar Mixed Convection Flows in a Duct with Builtin Wing Generator, 10th National Heat and Mass Transfer Conference, Srinagar, August 25, (1989).

G.Biswas and P.K.Nag, Flame Tube Wall Temperature and Combustion Efficiency of a Combustor Using Air Blast Atomization, IX National Conference on IC Engines and Combustion, Vol. II, No J2, (1985).

The Aerospace Engineering Division Medal 199798 The Institute of Engineers for the paper entitled Application a Multigrid Method for Flows Behind Bluff Bodies in a Channel.
 Best Paper Award, M.G. Deshpande Memorial Prize at the National Conference on Fluid Mechanics and Fluid Power held at IIT Kharagpur, January 57, 2000 for the paper entitled Transition to Chaos in TwoDimensional Flow Past a Square Cylinder (with A.K. Saha and K. Muralidhar).

Two Major Chapters in Compututional Fluid Flow and Heat Transfer, Edited by K. Muralidhar and T. Sundararajan under the auspices of IIT Kanpur Series, Narosa, India (1995), Revised Edition (2003).

K. Muralidhar and G. Biswas, Advanced Engineering Fluid Mechanics, Narosa, New Delhi and London (1996).

G. Biswas, S. Srinivasa Murthy, K. Muralidhar and V.K. Dhir, Heat and Mass Transfer97 , Proceedings of the Third ISHMTASME Heat and Mass Transfer Conference and 14th National Heat and Mass Transfer Conference IIT Kanpur, Narosa, New Delhi (1997).

S.K. Som and G. Biswas, Introduction to Fluid Mechanics and Machines, Tata McGrawHill Publishing Company, New Delhi.(1998)

G. Biswas and V. Eswaran, Turbulent Flows: Fundamentals, Experiments and Modeling, Narosa Publishing House, New Delhi, 2002.

S.K. Som and G. Biswas, Introduction to Fluid Mechanics and Fluid Machines, Second Edition, Tata McGrawHill Publishing Company, New Delhi, (2004)

K. Muralidhar and G. Biswas, Advanced Engineering Fluid Mechanics, Narosa, New Delhi, Second Edition (2005).

S.K. Som, G. Biswas and S. Chakraborty, Introduction to Fluid Mechanics and Fluid Machines, Third Edition, Tata McGrawHill Publishing Company, New Delhi, 2012

Gautam Biswas, K. L. Chopra, C. S. Jha, D. V. Singh, Profile of Engineering Education in India: Status, Concerns and Recommendations, Narosa Publishing House, India (2010)

G. Biswas, S. Mukhopadhyay, Computational Fluid Dynamics, Narosa Publishing House, India , 2013
 Created four (4) Webbased Courses on
FLUID MECHANICS, FLUID MACHINERY, THERMODYNAMICS and INTRODUCTION TO TURBULENCE under the auspices of MHRD sponsored
NPTELI Programme
 Created two (2) Webbased Course on COMPUTATIONAL FLUID DYNAMICS, CONVECTIVE HEAT & MASS TRANSFER under the auspices of MHRD sponsored NPTELII Programme