Ph.D. Students:


  • A. Mukhopadhyay, A Calculation Procedure for Viscous Incompressible Flows in Arbitrary Geometry and Study of Confined Wakes Behind Partially Enclosed Bluff Bodies, Dept of Mechanical Engineering, Indian Institute of Technology, Kanpur-208016, March, 1992 (Present email address: aniruddha.mukhopadhyay@ansys.com).
  • P. Deb, Three Dimensional Computation of Laminar and Turbulent Flows with Heat Transfer in a Channel with Built-in Longitudinal Vortex Generators, Dept of Mechanical Engineering, Indian Institute of Technology, Kanpur-208016, April, 1994.
  • P. K. Maji, Three-Dimensional Finite Element Analysis of Flow in the Spiral Casing of a Hydraulic Turbine, Dept of Mechanical Engineering, Indian Institute of Technology, Kanpur-208016, August, 1997 (Present address: MECON (I) Ltd, Ranchi, India).
  • A. K. Saha, Dynamical Characteristics of the Wake of a Square Cylinder at Low and High Reynolds Numbers, Dept of Mechanical Engineering, Indian Institute of Technology, Kanpur-208016, February, 1999 (Present email address: aksaha@iitk.ac.in).
  • P. Sandilya, Studies on Gas-Phase Mass Transfer in a Centrifugal Contractor, Dept of Chemical Engineering, Indian Institute of Technology Kanpur-208016, July, 1999 (Present email address: pavit@hijli.iitkgp.ernet.in).
  • R. Vasudevan, Heat Transfer Enhancement in Plate-Fin Heat Exchangers Using Longitudinal Vortex Generators, Dept of Mechanical Engineering, Indian Institute of Technology, Kanpur-208016, March, 2000 (devanesque@yahoo.co.in).
  • Shaligram Tiwari, Application of Vortex Generators and the Tubes of Different Shapes to Enhance Performance of Fin-tube Heat Exchangers Dept of Mechanical Engineering, Indian Institute of Technology, Kanpur-208016, February, 2004 (Present email address: shaligt@iitm.ac.in).
  • K Arul Prakash, Finite Element Analysis of Flow and Heat Transfer Characteristics in the Spallation Target Module of an Accelerator Driven Sub-critical System, Dept of Mechanical Engineering, Indian Institute of Technology, Kanpur-208016, June, 2006 (Present email address: arulk@iitm.ac.in).
  • Gaurav Tomar, Analysis of Interfacial Instabilities in Adhesion, Dewetting and Phase Change, Dept of Mechanical Engineering, Indian Institute of Technology, Kanpur-208016, January, 2008. (Present email address: gtom@mecheng.iisc.ernet.in)
  • Daniel Gerlach, Analyse von kapillar-dominanten Zweiphasenstroemungen mit einer kombinierten Volume-of-Fluid und Level-Set Methode, Der Technischen Fakultaet der Universitaet Erlangen Nuernberg, Erlangen-91058, Germany, August, 2008. (Jointly guided with Prof. Dr. Franz Durst) (Present email address: Daniel.Gerlach@cbi.uni-erlangen.de, dagerlach@gmx.de)
  • Amaresh Dalal, Development of a Finite Volume Based Navier-Stokes Solver on Unstructured Grids and Its Application to Analyze Transport Mechanisms in Heat Exchangers, Department of Mechanical Engineering, Indian Institute of Technology, Kanpur-208016, January 2009 (Present email address: amaresh@iitg.ernet.in)
  • Subhankar Sen, Flow Past Stationary and Vibrating Cylinders of Various Cross-Sections at Low Reynolds Numbers, Department of Mechanical Engineering, Indian Institute of Technology, Kanpur-208016, June 2010 (Present email address: subhankars@gmail.com)
  • Indrajit Chakraborty, Bubble Formation and Dynamics of Rising Bubbles in Quiescent and Co-flowing Liquids from Submerged Orifices, Department of Mechanical Engineering, Indian Institute of Technology, Kanpur-208016, January 2012 (Present email address: indracster@gmail.com)

  • Bahni Ray, Free Surface Flows in Drop Impact and Microchannel Electrokinetics, Department of Mechanical Engineering, Indian Institute of Technology, Kanpur-208016, February 2012 (Present email address: bahniray@gmail.com)
  • Pankaj Saha, Analysis of flow and heat transfer in a channel with periodically placed built-in vortex generators in laminar and turbulent regimes, Indian Institute of Technology, Kanpur-208016, May, 2013. Email: pankajonline2@gmail.com
  • Abhiram Hens, A Study on Phase Change and Instabilities using Continuum and Molecular Dynamics Simulations, Academy of Scientific and Innovative Research (AcSIR), New Delhi-Chennai, May 2016.
  • Anupam Sinha, Analysis of Fluid Flow & Heat Transfer in the representative modules of heat exchangers, Department of Mechanical Engineering, Jadavpur University, Kolkata, December 2016 (present email address: anupam_cmeri@yahoo.com)