List of
MS/PhD Thesis Examined
1. Amarnath M., 2008, Fault Assessment in Spur
and Helical Gears Using Vibration and Tribological
Analysis, IIT Madras.
2. Pranab Samanta,
2008, Hybrid (Permanent Magnetic +Hydrodynamic) Bearing: Theoretical and
Experimental Studies, IIT Bombay.
3. Sachin S. Naik, 2009, On Detection
of Crack in Hallow and Solid Circular Shaft/Beam, IIT Bombay.
4. Ganesan S., 2011,
Flexible Diaphragm Coupling-Rotor System Dynamics with Parallel Misalignment
and Centrifugal Stiffening, IIT Madras.
5. P. Jayashawal, 2011, Application of
Vibration Signature Analysis Techniques for Rolling Element Bearing Fault
Identification, RGPV, Bhopal.
6. Silaparasetti Srinivasa Rao, 2012, Influence of Tyre Models on Dynamic
Behaviour of Three-Wheeled Motor Vehicles, Andra
University, Vishakhapatnam.
7. Vinodkumar N. Patel,
2012, Studies of Ball Bearing Vibrations Caused by Local Defects and
Improvements in Fault Detection, IIT Delhi.
8. Manoj Chouksey, 2012, Studies in
Modal Analysis, Frequency Response Characteristics and Finite Element Model
Updating of Rotor Systems, IIT Delhi.
9. Malar Mohan K., 2012, Dynamic Analysis of Fabricated Drive
Housing in Process Plants, Anna University, Chennai.
10.
Chandan Kumar, 2013, Investigations of Dynamics of Cracked Rotor
Through Extended Lagrangian Mechanics, SLITE, Longowal.
11.
Avinash Anantrao Lonkar, 2013, Structural
Damage Detection Coupled with Modal Parameters. MNIT, Allahabad.
12.
Vijay G. S., 2013, Vibration
Signal Analysis for Defect Characterization of Rolling Element Bearing Using
Some Soft Computing Techniques, VTU Belgaum.
13.
Ramkrishna S. Dinavasi, 2013, Optimal Force
Inputs for Vibration Testing of Full Scale Slender Aerospace Vehicles, IIT
Bombay.
14.
Yohesh Pandya, 2014, Mesh Stiffness Studies on Spur Gear Pair with
Tooth Root Crack for Fault Diagnosis, IIT Indore.
15.
Armand Kruger, 2014, Transient Dynamic Finite Element
Modelling of Flexible Rotor Systems with Nonlinear Fluid Film Bearings and
Faults, University
of Pretoria, South Africa.
16.
R. Joselin, 2014, Burst
Pressure Prediction of GFRP Pressure Chambers using Acoustic Emission
Technique, JTNU Hyderabad.
17.
Jeyakumar P D, 2015, Frontal Impact Analysis and Improvement on a
Chassis Mounted Bus Body Structure, Anna University, Chennai.
18.
Sukesh Babu Chennuri,
2015, An Interval Analysis Approach to Study the Dynamics and Active Vibration
Control of Structures with Uncertainties and Weak Non-linearities,
IIT Delhi.
19.
Piyush Shakya, 2015, Diagnosis and
Prognosis of Rolling Element Bearings, IIT Delhi.
20.
Haribhau G. Phakatkar, 2016, Fatigue Design
Analysis of Spiral Arm Flexible Bearing, Savitribai Phule Pune
University.
21.
Budda Kishore, 2015,
Intelligent Condition Monitoring of Rotating Machinery using hybrid Expert
Systems, GITAM University, Visakhapatnam.
22.
Sidra Khanam,
2016, Vibration Analysis and Feature Extraction of Ball Bearings with Local
Defect, IIT Delhi.
23.
Hemanth K, 2016, Dynamic Analysis of Magneto-rheological (MR) Fluid
Based Semi-active Suspension System for Vehicular Application, NIT Surathkal.
24.
Ajay Kumar, 2017, Experimental
Studies on the Nonlinear Vibrations of Beams and Cylindrical Shells, IIT Delhi.
25.
V. V. Kondaiah,
2017, Parameter Estimation of Active Magnetic Thrust Bearing Using Radial Basis
Function Neural Networks and Differential Evolutions, JNTU Kakinada.
26.
Ankur Saxena, 2018, Study on Mesh Stiffness
and Modal Characteristics for Fault Detection of Geared Rotor Systems, IIT
Indore.
27.
Sivakumar Subramanian, 2018, Flow and Rotordynamic
Characteristics of Gas Turbine Labyrinth Seals Considering Radial Growth, IIT
Madras.
28.
Jaskaran Singh, 2018, Novel Approaches in Vibration-Based Condition
Monitoring of Ball Bearings, IIT Delhi.
29.
Md Asjad Mokhtar, 2018, Rotordynamic Studies on the Rotor-Stator Contact Interaction,
IIT Delhi.
30.
Phani Kumar Mallisetty, 2019, Investigation
of Externally Pressurized Multilayer Porous Journal Bearings, AcSIR, CMERI, Durgapur
31.
Vinay K. Thute,
2019, Diagnosis of Bearing and Inter Turn Faults in Induction Motor, VNIT
Nagpur