IITG Logo

Department of Mechanical Engineering

Indian Institute of Technology Guwahati

Journal Publications

Authors Title Year Journal Volume (Issue) Pages
B. Nayak, S. K. Dwivedy, K.S.R.K. Murthy Fabrication and characterization of magnetorheological elastomer with carbon black 2015 Journal of Intelligent Material Systems and Structures 26(7) 830-839
Sajan Kapil, Peter Eberhard and Santosha K. Dwivedy Dynamic Analysis of Cold-Rolling Process Using the Finite-Element Method 2015 ASME, J. Manuf. Sci. Eng 138(4) 041002-1-041002-10
L. Hauchhum, P. Mahanta, J.De Wilde Capture of CO2 from Flue Gas onto Coconut Fibre-Based Activated Carbon and Zeolites in a Fixed Bed 2015 Transport in Porous Media 110(3) 503-519
Kumar A. M. S, Panda, S. and Chakraborty, D. Harmonically exited nonlinear vibration of heated functionally graded plates integrated with piezoelectric composite actuator 2015 Journal of Intelligent Material Systems and Structures 26(8) 931-951
A. Bhowmik, R. Repaka, R. Mulaveesala and S.C. Mishra Suitability of frequency modulated thermal wave imaging for skin cancer detection - A theoretical prediction, 2015 Journal of Thermal Biology 51() 65-82
A. Bhowmik, R. Repaka, S.C. Mishra and K. Mitra Thermal assessment of ablation limit of subsurface tumor during focused ultrasound and laser heating, 2015 ASME Journal of Thermal Science and Engineering Applications 51() 65-82
A. Hens, G. Biswas and S. De Evaporation of water droplets on Pt-surface in presence of external electric field ? A molecular dynamics study 2015 The Journal of Chemical Physics 143(9) 094702-1 -094702-1 1
A. K. Mondal, P. Biswas, S. Bag Influence of tacking sequence on residual stress and distortion of single sided fillet submerged arc welded joint 2015 Journal of Marine Science and Application 14(3) 250-260
A. Muthuraja and S. Senthilvelan Abrasive wear performance of tungsten carbide based self-lubricant cutting tool material 2015 International Journal of Refractory Metals and Hard Materials 51() 91-101
A. Muthuraja and S. Senthilvelan Adhesive wear performance of tungsten carbide based self-lubricant cutting tool material 2015 International Journal of Refractory Metals and Hard Materials 52() 235-244
A. Muthuraja and S. Senthilvelan Development of tungsten carbide based self lubricant cutting tool material: Preliminary investigation 2015 International Journal of Refractory Metals and Hard Materials 48() 89-96
A.K. Tilak, D.N. Basu Computational Investigation of the Dynamic Response of a Supercritical Natural Circulation Loop to Aperiodic and Periodic Excitations 2015 Nuclear Engineering and Design 284() 251-263
AmitavaGhatak and P.S. Robi Creep Behaviour And Creep Life Assessment Of Hp40nb Reformer Steel 2015 Int. J. of Res. inEngg. and Appl. Sci 5(4) 98-105
AmitavaGhatak and P.S.Robi A comparative study of constitutive equations for the creep deformation of HP40Nb micro-alloyed steel 2015 Materials Sci. &Engg.-A 648() 418-427
AmitavaGhatak and P.S.Robi High-temperature Deformation Behavior of HP40Nb, Micro-alloyed Reformer Steel 2015 Metallography. Microstructure and Analysis 4(6) 508-517
Arbind Prasad, B. Devendar, M. Ravi Sankar, P.S. Robi Micro-Scratch Based Tribological Characterization of Hydroxyapatite (HAp) Fabricated through Fish Scales 2015 Materials Today:Procedia 5-Apr(4) 1216-1224
Arun Kadian & Biswas Pankaj A Comparative Study of Material Flow Behavior in Friction Stir Welding using Laminar and Turbulent Models, Journal of Materials Engineering and Performance 2015 Journal of Materials Engineering and Performance 24(10) 4119-4127
B J Bora and U K Saha Comparative assessment of a biogas run dual fuel diesel engine with rice bran oil methyl ester, pongamia oil methyl ester and palm oil methyl ester as pilot fuels 2015 Renewable Energy 81() 490-498
B J Bora and U K Saha Improving the performance of a biogas powered dual fuel diesel engine using emulsified rice bran biodiesel as pilot fuel through adjustment of compression ratio and injection timing 2015 ASME Journal of Engineering for Gas Turbines and Power 137() 091505-1-091505-14
B K Debnath, U K Saha and N Sahoo A comprehensive review on the application of emulsion as an alternative fuel for diesel engine. 2015 Renewable and Sustainable Energy Reviews 42() 196-211
B. Bharat, B. S. Kiran, D. Bandopadhya Design and Development of a Mobile Robot for Material Handling, 2015 Journal of Advancement in Robotics 3(3) 1-14
B. Das, S. Bag and S. Pal Defect detection in friction stir welding process through characterization of signals by fractal dimension 2015 Manufacturing Letters 7() 6-10
B. Ray, G. Biswas and A. Sharma Regimes during liquid drop impact on a liquid pool 2015 Journal of Fluid Mechanics 768() 492-523
Barkachary B. M. and Joshi S. N. Integrated finite element method (FEM) and response surface methodology (RSM) based modeling and simulation of single point diamond turning (SPDT) of silicon 2015 International Journal of Machining and Machinability of Materials 17(3) 330-354
Bhardwaj, S., and Dalal, A. Effect of Undulations on the Natural Convection Heat Transfer and Entropy Generation Inside Porous Right-angled Triangular Enclosure 2015 Numerical Heat Transfer:?Part A 67(9) 972-991
Bhardwaj, S., and Dalal, A., and Pati Influence of Wavy Wall and Non-uniform Heating on Natural Convection Heat Transfer and Entropy Generation Inside Porous Complex Enclosure 2015 Energy 79(1) 467-481
Biswajit Parida and Sukhomay Pal A fuzzy assisted grey Taguchi approach for the optimization of multiple weld quality properties in friction stir welding process 2015 Science and Technology of Welding and Joining 20(1) 35-41
Biswajit Parida, Shiv Dayal Vishwakarma and Sukhomay Pal Design and Development of Fixture and Force Measuring System for Friction Stir Welding Process Using Strain Gauges 2015 Journal of Mechanical Science and Technology 29(2) 739-749
C Patel, S D Kore Effect of Frequency on electromagnetic expansion of thin tubes 2015 Journal of Machining and Forming Technologies 7(2-Jan) -
D. Chatterjee and G. Biswas Dynamic behavior of flow around rows of square cylinders kept in staggered arrangement 2015 Journal of Wind Engineering and Industrial Aerodynamics 136(1) 1-11
D.N. Basu, A. Ganguly Conceptual Design and Performance Analysis of a Solar Thermal-Photovoltaic-Powered Absorption Refrigeration System 2015 Journal of Solar Energy Engineering 137(3) 031020-1-031020-9
Dawit . G. Gunjo, P. K. Mahanta, P. S. Robi Impact of Ambient Conditions and Top Heat loss on Useful Energy of Flat Plate Solar Collectors 2015 International Journal of Emerging Trends in Electrical and Electronics 11(0) 209-213
Dawit.G.Gunjo,P.K.Mahanta,P.S.Robi Effect of pitch on heat transfer characteristic of helical coils to be used for biogas production 2015 Int. Journal of Res. Engg., and Technology 4(0) 355-362
Deepak Kumar Yaduwanshi, Swarup Bag and Sukhomay Pal Heat transfer analyses in friction stir welding of aluminum alloy 2015 I Mech. E Part B: Journal of Engineering Manufacture 229(10) 1722-1733
Dixit U. S., Joshi S. N. and Kant Ravi Laser forming systems: a review 2015 International Journal of Mechatronics and Manufacturing Systems 8(3) 160-205
Dulhani, J. P., and Dalal, A. Flow past an equilateral triangular bluff obstacle: computational study of the effect of thermal Buoyancy on flow physics and heat transfer 2015 ?Numerical Heat Transfer:Part A 67(4) 476-495
G. Natarajan, N. Sahoo, V. Kulkarni Optimal fore-body shape for minimum drag in supersonic flow 2015 Journal of the Institution of Engineers (India): Series C 96(1) 5-11
Ganesh Natarajan Bio-allometry inspired resource estimation in Twenty20 cricket 2015 Proceedings of IMechE, Part P: Journal of Sports Engineering and Technology 229(4) 266-277
Hakeem Niyas, Likhendra Prasad, Muthukumar P Performance Investigation of High-Temperature Sensible Heat Thermal Energy Storage System during Charging and Discharging Processes. 2015 Clean Technologies and Environmental Policy, 17() 501-513
I. Chakraborty, G. Biswas, S. Polepalle and P.S. Ghoshdastidar Bubble Formation and Dynamics in a Quiescent High-Density Liquid 2015 AIChE Journal 61(11) 3996-4012
Jagu S. Rao and R. Tiwari A Pareto Optimal Design Analysis of Magnetic Thrust Bearings using Multi Objective Genetic Algorithms 2015 International Journal for Computational Methods in Engineering Science and Mechanics 16() 71-85
K. Das and S.C. Mishra Simultaneous estimation of size, radial and angular locations of a malignant tumor in a 3-D human breast - A numerical approach 2015 Journal of Thermal Biology, 52() 147-156
Kant R., Joshi S. N. and Dixit U. S. An Integrated FEM-ANN Model for Laser Bending Process with Inverse Estimation of Absorptivity 2015 Journal of Mechanics of Advanced Materials and Modern Processes 1(6) 1-12
Kumar A S P., Panda S and Reddy N. H Smart damping of vibration of annular plates through the design of a cylindrically orthotropic piezoelectric fiber-reinforced composite actuator 2015 Acta Mechanica 226(9) 3151-3176
Kumar D. A., Kadian Arun Kumar and Biswas Pankaj Numerical and experimental study on influence of tool plunging force and shoulder size on thermal history of Friction Stir Welding 2015 International Journal of Manufacturing Research (IJMR- Inderscience) 10(1) 64-86
Kumar, A. M. S., Panda, S., Kumar S. and Chakraborty, D. A design of laminated composite plates using graded orthotropic fiber-reinforced composite plies 2015 Composites Part B: Engineering 79() 476-493
L. Roy and S . K. Kakoty Application of Genetic Algorithm in Optimization of Hydrodynamic Bearings 2015 Advances in Intelligent Systems and Computing 335(1) 207-217
Lintu Roy and S.K. Kakoty Groove location for optimum performance of three- and four-lobe bearings using genetic algorithm 2015 Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology January 2015 229(1) 47-63
Lototskyy MV, Sekhar BS, Muthukumar P, Pollet BG, Linkov V Niche applications of metal hydrides and related thermal management issues. 2015 J. Alloys and Compounds 645(1) 117-122
M.K.S. Sarkar, D.N. Basu Working Regime Identification for Natural Circulation Loops by Comparative Thermalhydraulic Analyses with Three Fluids under Identical Operating Conditions 2015 Nuclear Engineering and Design 293() 187-195
Manas Das, V.K. Jain, P.S Ghoshdastidar A 2D CFD simulation of MR polishing medium in magnetic field-assisted finishing process using electromagnet 2015 International Journal of Advanced Manufacturing Technology 76(1) 173-187
MSA Kumar, S Panda and D Chakraborty Design and analysis of a smart graded fiber-reinforced composite laminated plate 2015 Composite Structures 124() 176-195
N. K. Mishra, S.C. Mishra and P. Muthukumar Performance characterization of a medium-scale liquefied petroleum gas cooking stove with a two-layer porous radiant burner 2015 Applied Thermal Engineering 89() 44-50
Natesan S., Kalita K. and Venkatesu S., Numerical and Experimental Investigation of Bridge Currents of an Induction Machine Equipped with Bridge Configured Winding 2015 International Journal of Electrical and Computer Engineering 5(6) 1262-1274
P. Randive, A. Dalal, K.C. Sahu, G. Biswas, P. Mukherjee Wettability effects on contact line dynamics of droplet motion in an inclined channel 2015 Physical Review E 91(5) 053006-1-053006-16
Panda S, Reddy N. H. and Kumar A. S. P. Design and finite element analysis of a short piezoelectric fiber-reinforced composite actuator 2015 Archive of Applied Mechanics 85(5) 691-711
Panda, S. P, and Panda, S. Micromechanical finite element analysis of effective properties of a unidirectional short piezoelectric fiber reinforced composite 2015 International Journal of Mechanics and Materials in Design 11(1) 41-57
Pandey, V.,?Dalal, A., Biswas, G., Bubble Formation in Film Boiling Including Electrohydrodynamic Forces 2015 Procedia IUTAM 15() 86-91
Perumalla Janaki Ramulu, Satish V. Kailas, R. Ganesh Narayanan Formability of friction stir welded sheets made of AA 6061-T6 at different weld orientations and weld locations 2015 International Journal Materials and Product Technology 50(2) 147-160
PhyuPhyu Thant, P. Mahanta and P.S. Robi Effect of Spirals in an Inclined Bubbling Fluidized Bed Paddy Dryer 2015 International Journal of Engineering Research and Technology 4(6) 270-277
PhyuPhyu Thant, P. Mahanta and P.S. Robi Performance Enhancement of Inclined Fluidized Bed Paddy Dryer by Design Modification 2015 International Journal of Engineering and Applied Sciences 2(8) 61-65
PhyuPhyu Thant, P.S.Robi and P. Mahanta Effect of Incline in an Inclined Bubbling Fluidized Bed Paddy Dryer 2015 International Journal of Scientific Engineering and Technology Research 4(6) 1190-1196
Prakash Kumar Sahu and Sukhomay Pal Multi-Response Optimization of Process Parameters in Friction Stir Welded AM20 Magnesium Alloy by Taguchi Grey Relational Analysis 2015 Journal of Magnesium and Alloys 3(1) 36-46
PS Rama Sreekanth, S Kanagaraj Influence of multi walled carbon nanotubes reinforcement and gamma irradiation on the wear behaviour of UHMWPE 2015 Wear 334-335() 82-90
R. Singh, A. Sasmal and S.C. Mishra Nanoparticle mediated transmittance signals from pulsed laser irradiated cancerous lung as a function of respiration 2015 Optik - International Journal for Light and Electron Optics 126(4) 5605-5609
R. Singh, K. Das, J. Okajima, S. Maruyama and? S.C. Mishra Modelling skin cooling using optical windows and cryogens during laser induced hyperthermia in a multilayer vascularized tissue, 2015 Applied Thermal Engineering 89() 28-35
R. Tiwari and R. C. M. Chandran Multitude of Objectives Based Optimum Designs of Cylindrical Roller Bearings Using Evolutionary Algorithms 2015 ASME Journal of Tribology 137() 041504-1-041504-12
R. Tiwari and V. Talatam Estimation of Speed-Dependent Bearing Dynamic Parameters in Rigid Rotor Systems Levitated by Electromagnetic Bearings 2015 Mechanism and Machine Theory 92() 100-112
Randive, P., and Dalal, A. Influence of Geometry on Mobilization of Trapped Blob 2015 European Journal of Mechanics - B/Fluids 53() 1-10
Rasmi Ranjan Behera, M. Ravi Sankar State of the Art on Under Liquid Laser Beam Machining 2015 Materials Today: Procedia 5-Apr() 1731-1740
S Kirtania and D Chakraborty Failure analysis of carbon nanotube/epoxy composites having a broken carbon nanotube 2015 Journal of Reinforced Plastics and Composites 34(19) 1639-1647
S Roy and U K Saha Wind tunnel experiments of a newly developed two-bladed Savonius-style wind turbine. 2015 Applied Energy 137() 117-125
S. Biswas, P. Sharma, B. Mondal and G. Biswas Analysis of Mixed Convective Heat Transfer in a Ribbed Channel using The Lattice Boltzmann Method 2015 Numerical Heat Transfer Part A 68(1) 75-98
S.C. Mishra and R. K. Chourasia ? Analysis of dual-phase-lag non-Fourier conduction and radiation heat transfer in a planar slab 2015 Numerical Heat Transfer, Part A, 68() 1010-1022
S.M.kamal and U.S.Dixit Flexibility study of thermal autofrettage of thick-walled cylinders. 2015 ASME Journal of Pressure Vessel Technology 137(6) -
Sachin Singh, , M. Ravi Sankar Design and Performance Evaluationof Abrasive Flow Finishing Process during Finishing of Stainless Steel Tube Process during Finishing of Stainless Steel Tubes 2015 Materials Today:Procedia 5-Apr() 3161-3169
Sathisha H. M., and Dalal, A. Two-Dimensional Unsteady Simulation of All-Vanadium Redox Flow Battery 2015 ASME Journal of Thermal Science and Engineering Applications 8(1) 11019-
Satya Sekhar B, Muthukumar P Thermal modelling of a double-stage metal hydride based heat transformer. 2015 Numerical Heat Transfer Part A 67() 883-901
Satya Sekhar B, Muthukumar P Performance Investigation of a Single-stage Metal Hydride Heat Transformer. 2015 Int. J Green Energy 13(1) 102-109
Sekhar BS, Muthukumar P Development of Double-Stage Metal Hydride based Hydrogen Compressor for Heat Transformer Application, 2015 Journal of Energy Engineering 141(4) 04014049-1 -04014049-6
V. Satheeshkumar, R. Ganesh Narayanan Experimental evaluation and prediction of deep drawability of adhesive bonded steel sheets 2015 Materialwissenschaft und Werkstofftechnik 46(7) 713-735
V. Satheeshkumar, R. Ganesh Narayanan Forming performance of adhesive bonded steel sheets reinforced with metallic wires 2015 Welding in the World: The International Journal of Materials Joining 59(6) 883-900
V. Satheeshkumar, R. Ganesh Narayanan In-plane plane-strain formability of adhesive bonded steel sheets: Influence of adhesive properties 2015 International Journal Advanced Manufacturing Technology 76(5) 993-1009
V. Satheeshkumar, R. Ganesh Narayanan Prediction of formability of adhesive bonded steel sheets and experimental validation 2015 Archives of Civil and Mechanical Engineering 15(1) 31-40
V. Waghole and R. Tiwari Optimization of Spherical Roller Bearing Design using Artificial Bee Colony Algorithm and Grid Search Method 2015 International Journal for Computational Methods in Engineering Science and Mechanics(DOI: 10.1080/15502287.2015.1045998) 16() 221-233
V.K. Mishra, S.C. Mishra, D.N. Basu Combined Mode Conduction and Radiation Heat Transfer in a Porous Medium and Estimation of Optical Properties of the Porous Matrix 2015 Numerical Heat Transfer Part A 67(10) 1119-1135
V.Yadav,A.K.Singh and U.S.Dixit Inverse estimation of thermal parameters and friction coefficient during warm flat rolling process. 2015 Internation Journal of Mechanical Sciences 96-97() 182-198
Varma, N., Dulhani, J. P., Dalal, A., Sarkar, S., and Ganguly, S. Effect of Channel Confinement on Mixed Convective Flow Past an Equilateral Triangular Cylinder 2015 ASME Journal of Heat Transfer 137(12) 121013-
Kant R. and Joshi S. N. Numerical Modeling and Experimental Validation of Curvilinear Laser Bending of Magnesium Alloy Sheets 2015 Proceedings of The Institute of Mechanical Engineering Part B: Journal Of Engineering Manufacture 228(9) 1036-1047

Authors Title Year Journal Volume (Issue) Pages
Sajan Kapil, Peter Eberhard and Santosha K. Dwivedy Nonlinear Dynamic Analysis of a Parametrically Excited Cold Rolling Mill 2014 ASME, Journal of Manufacturing Science and Engineering 136(4) 041012-1-041012-10
S. Mahto and U.S. Dixit Parametric study of double link flexible manipulator 2014 Universal Journal of Mechanical Engineering 2(7) 211-219
R.P. Chopade, S.C. Mishra, P. Mahanta, S. Maruyama On configuration of load in radiant furnace for uniform thermal conditions 2014 Heat Transfer Engineering 35(1) 94-109
Randive,P., Dalal, A., Mukherjee, P.P. Mesoscopic simulation of blob resonance in a model porous pathway 2014 Microfluidics and Nanofluidics 18(2) 215-232
P.Kalita,P.Mahanta,U.K. Saha Study of bed-to-wall heat transfer with twisted tape at the upper splash region of a pressurized circulating fluidized bed unit 2014 International Journal of Heat and Mass Transfer 78() 260-266
Jagannath Sardar, Dibakar Bandopadhya Development and Fabrication of Cement Reinforced Polypropylene Composite Material Spur Gear, Journal of Polymer Engineering, 2014 Journal of Polymer Engineering 34(8) 775-786
Dillip Kumar Biswal, Dibakar Bandopadhya*, and Santosha Kumar Dwivedy Development of an active catheter mechanism using IPMC for invivo inspection, 2014 Journal of Mechatronics and Automation 1(1) 1-10
A. Bhowmik, R. Repaka and S.C. Mishra Thermographic evaluation of early melanoma within the vascularized skin using combined non-Newtonian blood flow and bioheat models 2014 Computers in Biology and Medicine 53() 206-219
A. Bhowmik, R. Repaka, and S.C. Mishra Thermal analysis of increasing subcutaneous fat thickness within human skin - A numerical study 2014 Numerical Heat Transfer, Part A 67() 313-329
A. Bhowmik, R. Repaka, S.C. Mishra and K. Mitra Analysis of radiative signals from normal and malignant human skins subjected to a short-pulse laser 2014 International Journal of Heat and Mass Transfer 68() 278-294
A. Chaugale and R. Tiwari Identification of Bearing Dynamic Parameters and Unbalance States in a Flexible Rotor System Fully Levitated on Active Magnetic Bearings 2014 Mechatronics 24(3) 274-286
A. Ghosh, P. Goswami, P.Mahanta, A. Verma, Effect of carbon fiber length and graphene on carbon-polymer composite bipolar plate for PEMFC 2014 Journal of Solid State Electrochemistry 18(12) 3427-3436
A. Hens, G. Biswas and S. De Analysis of interfacial instability and multimode bubble formation in saturated pool boiling using Coupled Level Set and Volume- of- Fluid approach 2014 Physics of Fluids 26(1) 012105-1-12105-14
A. Hens, R. Agarwal and G. Biswas Nanoscale study of boiling and evaporation in a liquid Ar film on a Pt heater using molecular dynamics simulation 2014 International Journal of Heat and Mass Transfer 71() 303-312
A. J. Chaudhari, N. Sahoo and V. Kulkarni Simulation models for spark ignition engine: A comparative performance study 2014 Energy Procedia 54() 330-341
A. Sasmal and S.C. Mishra Analysis of non-Fourier conduction and radiation in a differentially heated 2-D square cavity, 2014 International Journal of Heat and Mass Transfer 79() 116-125
A.K.De An implicit non-staggered Cartesian grid method for incompressible viscous flows in complex geometries 2014 Sadhana, Indian Academy of Science 39(5) 1071-1094
Anand Mohan S Senthilvelan Preliminary Bending Fatigue Performance Evaluation of Asymmetric Composite Gear 2014 Mechanism and Machine Theory, 78() 98-104
Anbarasu S, Muthukumar P and Mishra SC Tests on LmNi5 Based Solid-State Hydrogen Storage Container. 2014 Int. J Science Research 1() 420-424
Anbarasu S, Muthukumar P, Mishra SC Tests on LmNi4.91Sn0.15 based Solid State Hydrogen Storage Device with Embedded Cooling Tubes ? Part B: Desorption Process 2014 Int. J. Hydrogen Energy 39(10) 4966-4972
B J Bora, U K Saha, S Chatterjee and V Veer Effect of compression ratio on performance, combustion and emission characteristics of a dual fuel diesel engine run on raw biogas. 2014 Energy Conversion and Management 87() 1000-1009
B K Debnath, U K Saha and N Sahoo An experimental way of assessing the application potential of emulsified palm biodiesel towards alternative to diesel. 2014 ASME Journal of Engineering for Gas Turbines and Power 136() 021401-1-021401-12
B. Nayak, S.K. Dwivedy and K.S.R.K. Murthy Dynamic stability of a rotating sandwich beam with magnetorheological elastomer core 2014 European Journal of Mechanics - A/Solids 47() 143-155
Bibin John, Sarath G, Vinayak Kulkarni and Ganesh Natarajan Performance Comparison of Flux Schemes for Numerical Simulation of High-Speed Inviscid Flows 2014 Progress in Computational Fluid Dynamics 14(2) 83-96
Biswal, D.K., Bandopadhya, D., Dwivedy, S.K. Dynamic modeling and effect of dehydration on segmented IPMC actuators following variable parameter pseudo-rigid body modeling technique 2014 Mechanics of Advanced Materials and Structures 21(2) 129-138
C. Loha, S. Gu, J. De Wilde, P. Mahanta, P.K. Chatterjee Advances in mathematical modeling of fluidized bed gasification 2014 Renewable and Sustainable Energy Reviews 40() 688-715
Chanda, A., Fischer, A., Eberhard, P., Dwivedy, S.K. Stability analysis of a thin-walled cylinder in turning operation using the semi-discretization method 2014 Acta Mechanica Sinica 30(2) 214-222
D. Arumuga Perumal, Anoop K Dass Lattice Boltzmann simulation of two- and three-dimensional incompressible thermal flows 2014 Heat Transfer Engineering 35(14-15) 1320-1333
D. Doley, V. Satheeshkumar, R. Ganesh Narayanan Influence of wire reinforcement on the forming behaviour of adhesive bonded steel sheets 2014 Advanced Materials Research 939() 336-341
D. J. Bordoloi and R. Tiwari Optimum Multi-fault Classification of Gears with Integration of Evolutionary and SVM Algorithms 2014 Mechanism and Machine Theory 73() 49-60
D. J. Bordoloi and R. Tiwari Support Vector Machine Based Optimization of Multi-Fault Classification of Gears with Evolutionary Algorithms from Time-Frequency Vibration Data 2014 Measurement 55() 1-14
D. Raha, P. Mahanta, M.L. Clarke, The implementation of decentralised biogas plants in Assam, NE India: The impact and effectiveness of the National Biogas and Manure Management Programme 2014 Energy Policy 68() 81-91
D.N. Basu, S. Bhattacharyya, P.K. Das A Review of Modern Advances in Analyses and Applications of Single-phase Natural Circulation Loop 2014 Nuclear Engineering and Design 280() 326-348
Debaleena Chakraborty, K.S.R.K. Murthy and D. Chakraborty A new single strain gage technique for the accurate determination of mode I stress intensity factor in orthotropic composite materials 2014 Engineering Fracture Mechanics 124-125() 142-154
Deepak Kumar Yaduwanshi, Swarup Bag and Sukhomay Pal Effect of preheating in hybrid friction stir welding of aluminum alloy 2014 Journal of Materials Engineering and Performance 23(10) 3794-3803
Deepak Sharma, Kalyanmoy Deb Generation of Compliant Mechanisms using Hybrid Genetic Algorithm 2014 Journal of The Institution of Engineers (India): Series C 95(4) 295-307
Deepati Anil Kumar, Tikader Sujoy and Biswas Pankaj Experimental Investigation of Mechanical Properties on Friction Stir Welding of Dissimilar Aluminum Alloys 2014 International Journal of Current Engineering and Technology 2() 242-246
Dibakar Bandopadhya A method to solve and study the time delayed vibration characteristics of smart material actuator applying Lambert W-function, International Journal of Recent Trends in Mechanical Engineering, 2014 International Journal of Recent Trends in Mechanical Engineering, 1(1) 1-8
Dillip Kumar Biswal, Dibakar Bandopadhya An Intelligent Computer-Aided Assembly Process Planning Methodology for Mechanical Parts 2014 International Journal of Recent Trends in Mechanical Engineering, 2(2) 1-8
Dillip Kumar Biswal, Dibakar Bandopadhya Theoretical and Experimental Investigation of Non-linear Vibration Response of an IPMC Actuator Subjected to Alternating Electric Potential 2014 Journal of Mechatronics and Automation 1(1) 11-26
Doley, J.K.,?Kore, S.D. Electromagnetic formability of an aluminium ice tray 2014 Key Engineering Materials 611-612() 1124-1131
Dulhani, J. P., Sarkar, S., and?Dalal, A. Effect of Angle of Incidence on Mixed Convective Wake Dynamics and Heat Transfer Past a Square Cylinder in Cross Flow at Re = 100 2014 International Journal of Heat and Mass Transfer 74() 319-332
G.N. Shelke,P. Mahanta Biomass briquette characterization for downdraft gasification 2014 Applied Mechanics and Materials 592() 2442-2446
Jagannath Sardar, Dibakar Bandopadhya A Stress Distribution Model along the Tooth Mating Surface of a Non-Metallic Spur Gear using the Hertz's Contact Theorem, 2014 Trends in Machine design 1(2) 23-32
Jagannath Sardar, Dibakar Bandopadhya Investigation and Evaluation of Wear Characteristics of A Nonmetallic Spur Gear 2014 Trends in Machine design 1(3) 1-9
Jamir T. M., Kakoty S. K. and Kalita K., Gas Foil Bearings (GFBs) With Different Bump Foil Materials 2014 Trends in Machine Design 1(2) 1-11
Jitendra Kumar Patel and Ganesh Natarajan A generic framework for design of interface capturing schemes for multi-fluid flows 2014 Computers and Fluids 106() 108-118
K. Das and S.C. Mishra Non-invasive estimation of size and location of a tumor in a human breast using a curve fitting technique 2014 International Communications in? Heat and Mass Transfer 56() 63-70
K. Das and S.C. Mishra Study of thermal behavior of a biological tissue: An equivalence of Pennes bioheat equation and Wulff continuum model 2014 Journal of Thermal Biology 45() 103-109
K.Acharyya, Arun Chattopadhyaya and U.S. Dixit Determination of effective shear modulus of graphite/epoxy mixture by an inverse method 2014 Journal of Materials Forming and Machining Processes-IJMFMP 1() 1-13
Kadam , P. A., Panda, S. Nonlinear analysis of an imperfect radially graded annular plate with a heated edge 2014 International Journal of Mechanics and Materials in Design 10(3) 281-304
Kalidasan, R., Ramanuj, V., Sarma, D.K., Senthilvelan, S. Influence of cutting speed and offset distance over cutting tool vibration in multi-tool turning process 2014 Advanced Materials Research 984() 100-105
Kalidasan, R., Yatin, M., Sarma, D.K., Senthilvelan, S. Effect of offset distance on cutting forces and heat generation in multi-tool turning process 2014 Applied Mechanics and Materials 592() 211-215
Kishor Kumar Gajrani, Sumit Shekhar, M. Ravi Sankar Experimental comparative study of Conventional, Micro-Textured and Coated Micro-Textured Tools in Machining 2014 International Colloquium on Materials, Manufacturing and Metrology (ICMMM-2014) 3(1) 91-104
L. Hauchhum, P. Mahanta Carbon dioxide adsorption on zeolites and activated carbon by pressure swing adsorption in a fixed bed 2014 International Journal of Energy and Environmental Engineering 5(4) 349-356
L. Hauchhum, P. Mahanta CO2 capture onto zeolite 13X and zeolite 4A by pressure swing adsorption in a fixed bed 2014 Applied Mechanics and Materials 592() 1456-1460
Lenka Visweswara Rao and S K Kakoty Design of compact active magnetic bearing 2014 International Journal of Applied Sciences and Engineering Research 3(3) 741-754
M. Basumatary, G. Natarajan and S.C. Mishra Defect correction based velocity reconstruction for physically consistent simulations of non-Newtonian flows on unstructured grids 2014 Journal of? Computational Physics 272() 227-244
M. Chandrasekaran, M. Muralidhar and U.S. Dixit Online optimization of finish turning process: strategy and experimental validation 2014 International Journal of Advanced Manufacturing 75(5) 783-791
M.K.S. Sarkar, A.K. Tilak, D.N. Basu A State-of-the-art Review of Recent Advances in Supercritical Natural Circulation Loops for Nuclear Applications 2014 Annals of Nuclear Energy 73() 250-263
Manas Das, V.K. Jain, P.S. Ghoshdastidar Estimation of magnetic and rheological properties of MR polishing fluid and their effects on magnetic field assisted finishing process 2014 Int. J. Precision Technology 4(3\4) 247-267
Mandal N. R, Sharat Kumar and Biswas Pankaj Distortion Measurement of Ship Blocks using Photogrammetry 2014 Journal of Ship Production and Design 29() 1-8
Mertens, A.J., Senthilvelan, S. Abrasive wear performance of CNT/PP composites 2014 Applied Mechanics and Materials 592() 1262-1266
Mukesh Kumar, Satish V. Kailas, R. Ganesh Narayanan In-Plane Plane-Strain formability investigation of friction stir welded sheets made of dissimilar Aluminium alloys 2014 Applied Mechanics and Materials 446-447(0) 301-305
Muthuraja, A., Senthilvelan, S Compaction characteristics of tungsten carbide based self lubricant cutting tool material 2014 Applied Mechanics and Materials 592() 87-91
N. Shanmugapriya, C. Somayaji, S. Kanagaraj Optimization of Ce0.6Zr0.4-xAl1.3xO2 solid solution based on oxygen storage capacity 2014 Journal of Nanoparticle Research 16(2) 1-10
N. Shanmugapriya, Chandramohan Somayaji, S. Kanagaraj Characterization and optimization of Ce0.6Zr0.4-xMnxO2 (x?0.4) 2014 Journal of Nanoparticle Research 16(10) 1-10
N. Yadaiah and S. Bag Development of egg-configuration heat source model in numerical simulation of autogeneous fusion welding processes 2014 International Journal of Thermal Sciences 86(12) 125-138
Narang H. K., Mahapatra M. M., P. K. Jha and Biswas Pankaj Optimization and prediction of angular distortion and weldment characteristics of TIG square butt joints 2014 Journal of Materials Engineering and Performance 35(5) 1750-1758
Nayan Jyoti Baishya, Deepak Sharma, Uday S. Dixit Optimization of Pressure Vessel Under Thermo-Elastic Condition 2014 Journal of The Institution of Engineers (India): Series C 95(4) 389-400
P Manivel, S Kanagaraj, A Balamurugan, N Ponpandian, D Mangalaraj, C Viswanathan Rheological behavior and electrical properties of polypyrrole/thermally reduced graphene oxide nanocomposite 2014 Colloids and Surfaces A: Physicochemical and Engineering Aspects 441(614) 622-
P Manivel, S Kanagaraj, A Balamurugan, N Ponpandian, D Mangalaraj, C Viswanathan Rheological behavior and electrical, thermal properties of polypyrrole/graphene oxide nanocomposites 2014 Journal of Applied Polymer Science 131(40642) -
P. Gangsar and R. Tiwari Multi-Class Fault Taxonomy in Rolling Bearings at Interpolated and Extrapolated Speeds Based on Time Domain Vibration Data by SVM Algorithm 2014 Journal of Failure Analysis and Prevention 14(6) 826-837
P. Saha, G. Biswas and S. Sarkar Comparison of winglet-type vortex generators periodically deployed in a plate-fin heat exchanger 2014 International Journal of Heat and Mass Transfer 74() 292-305
Patel, C.,?Kore, S.D. Dual electromagnetic forming using single uniform pressure Coil 2014 Key Engineering Materials 611-612() 723-730
Perumalla Janaki Ramulu, R. Ganesh Narayanan Influence of shoulder diameter, plunge depth, welding speed, rotational speed on the tensile behavior of friction stir welded AA 6061-T6 sheets 2014 Journal of Testing and Evaluation 42(3) 1-13
PS Rama Sreekanth, S Kanagaraj Influence of MWCNTs and gamma irradiation on thermal characteristics of medical grade UHMWPE 2014 Bulletin of Material Science 37(2) 347-356
R. Ganesh Narayanan, Sumitesh Das Sustainable and Green Manufacturing and Materials Design through Computations 2014 Proc. of the IMecheE, Part C: Journal of Mechanical Engineering Science 228(9) 1581-1605
R. Jain, V. Chouhan, D. Bandopadhya Design and Development of an Under-actuated Mechanism for Grasping and Grabbing of Objects, 2014 Journal of Mechatronics and Automation, 1(2) -
R. S. Desai and S. Bag Influence of displacement constraints in thermomechanical analysis of laser micro-spot welding process 2014 Journal of Manufacturing Processes 16(2) 264-275
R. Singh, K. Das and S.C. Mishra Laser-induced hyperthermia of nanoshell mediated vascularized tissue - a numerical study 2014 ?Journal of Thermal Biology 44() 55-62
R. Tiwari and D. J. Bordoloi Unification of Multi-class Fault Classification from Diverse Domain Features of Gear Using SVM Algorithms 2014 International Journal of Condition Monitoring & Diagnostic Engineering 17(3) 39-49
R.K. Arun, K. Chaudhury, M. Ghosh, G. Biswas, N. Chanda and S. Chakraborty Controlled splitting and focusing of a stream of nanoparticles in a converging-diverging microchannel 2014 Lab on a Chip 14(19) 3800-3808
R.R. Vernekar and S.C. Mishra Analysis of transport of short-pulse radiation in a participating medium using lattice Boltzmann method 2014 International Journal of Heat and Mass Transfer 77() 218-229
Ramesh, P., Bommana, D., Kulkarni, V., Sahoo, N., Dwivedy, S.K. Experimental assessment of noncontact type laser-based force measurement technique for impulsive loading 2014 International Journal of Structural Stability and Dynamics 14(4) -
Randive, P., and?Dalal, A. Influence of viscosity ratio and wettability on droplet displacement behavior: A mesoscale analysis 2014 Computers and Fluids 102() 15-31
Randive, P.,?Dalal, A., and Mukherjee, P. P. Lattice Boltzmann Modeling of Two-phase Behavior Under Acoustic Excitation: Capillarity-wettability Interaction 2014 International Journal of Heat and Mass Transfer 74() 460-472
Randive, P.,?Dalal, A., and Mukherjee, P. P. Probing the Influence of Superhydrophobicity and Mixed Wettability on Droplet Displacement Behavior 2014 Microfluidics and Nanofluidics 17(4) 657-674
S Kirtania and D Chakraborty Analysis of carbon nanotube-reinforced alumina matrix nanocomposites with a broken fiber 2014 Journal of Reinforced Plastics and Composites 33(4) 389-398
S Kirtania, D Chakraborty Fracture Behavior of Carbon Nanotube-Based Composites with a Broken Fiber Using Multi-Scale Finite Element Modeling 2014 Journal of Computational and Theoretical Nanoscience 11(3) 676-684
S Malik and S K Kakoty Analysis of Dimple Textured Parallel and Inclined Slider 2014 Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology 228(12) 1343-1357
S Roy and U K Saha An adapted blockage factor correlation approach in wind tunnel experiments of a Savonius-style wind turbine. 2014 Energy Conversion and Management 86() 418-427
S. Anbarasu, P. Muthukumar and S.C. Mishra Tests on LmNi4.91Sn0.15 based Solid state hydrogen storage device with embedded cooling tubes - Part B: Desorption process 2014 International Journal of Hydrogen Energy 29() 4966-4972
S. Anbarasu, P. Muthukumar and S.C. Mishra Thermal modeling of LmNi4.91Sn0.15 based Solid State Hydrogen Storage Device with Embedded Cooling Tubes 2014 International Journal of Hydrogen Energy 39() 15549-15562
S. Anbarasu, P. Muthukumar, and S.C. Mishra Tests on LmNi4.91Sn0.15 based Solid state hydrogen storage device with embedded cooling tubes - Part A: Absorption process 2014 International Journal of Hydrogen Energy 39() 3342-3351
S. Anbarasu, P. Muthukumar, and S.C. Mishra Thermal modeling of Mg2Ni based solid state hydrogen storage reactor 2014 Heat Transfer Engineering 35() 1354-1362
S. Arun, P S Rama Sreekanth, S. Kanagaraj Mechanical characterization of PMMA/SWNTs bone cement using Nanoindenter 2014 Advanced Biomaterials 29(B1)() 4-9
S. Arun, S. Kanagaraj Mechanical characterization and validation of poly (methyl methacrylate)/multi walled carbon nanotube composite for the polycentric knee joint 2014 Journal of the Mechanical Behavior of Biomedical Materials 50() 33-42
S. K. Singh, and R. Tiwari Detection and Localization of Multiple Cracks in a Shaft System: An Experimental investigation 2014 Measurement 53() 182-193
S. Mahto and U.S. Dixit Shape optimization of revolute-jointed rigid-flexible manipulator 2014 Journal of Institution of Engineers (India), Series C 95(4) 335-346
S. S. Gautam and R K Saxena A finite element study on effect of frictional heating in the taylor rod impact problem 2014 World Journal of Engineering 11(6) 529-542
S. Sarkar, S. Ganguly and G. Biswas Buoyancy driven convection of nanofluids in an infinitely long channel under the effect of a magnetic field 2014 International Journal of Heat and Mass Transfer 71() 328-340
S. Singh, N. Yadaiah, S. Bag and S. Pal Numerical simulation of welding induced residual stress in fusion welding process using adaptive volumetric heat source 2014 I Mech. E, Part C: Journal of Mechanical Engineering Science 228(16) 2960-2972
S.C. Mishra , H. Poonia, A.K. Das, P. Asinari and R. Borchiellini Analysis of conduction-radiation heat transfer in 2-D enclosure using the lattice Boltzmann method 2014 Numerical Heat Transfer, Part A 66() 669-688
S.C. Mishra and H. Sahai Analysis of non-Fourier conduction and volumetric radiation in a concentric spherical shell using the lattice Boltzmann method and the finite volume method 2014 International Journal of Heat and Mass Transfer 68() 51-66
S.C. Mishra, A. Akhtar and A. Garg Numerical analysis of Rayleigh-Benard convection with and without volumetric radiation 2014 Numerical Heat Transfer, Part A 65() 144-164
S.C. Mishra, H. Poonia, R. Vernekar, and A.K. Das Lattice Boltzmann method applied to the analysis of radiative transport problems with and without conduction in a 1-D planar medium 2014 Heat Transfer Engineering 35() 1267-1278
S.C. Mishra, R. Singh, P. Agarwal and Ch. Hari Krishna Analysis of radiative transport in a 2-D cylindrical participating medium subjected to collimated radiation, 2014 Numerical Heat Transfer, Part A 66() 884-903
Sarkar, S., Ganguly, S., and Dalal, A. Analysis of Entropy Generation during Mixed Convective Heat Transfer of Nanofluids past a Rotating Circular Cylinder 2014 ASME Journal of Heat Transfer 136(6) 1-10
T Mane, V Goel, SD Kore Finite Element Modelling of Electro-hydraulic Forming of Sheets 2014 Procedia Materials Science 6() 105-114
T S Reddy Ganji and S K Kakoty Dynamic Characteristics And Stability Of Cylindrical Textured Journal Bearing 2014 International Journal of Recent advances in Mechanical Engineering 3(3) 1-4
T. Moasunep. Jamir, S. K. Kakoty, Karuna Kalita Gas Foil Bearing Analysis And The Effect Of Bump Foil Thickness On Its Performance Characteristics Using A Non-Linear Matrix Equation Solver 2014 International Journal of Recent advances in Mechanical Engineering 3(3) 15-30
V. Satheeshkumar, R. Ganesh Narayanan Formability of adhesive bonded steel sheets with artificial finite adhesive defects 2014 Journal of Strain Analysis for Engineering Design 49(5) 286-300
V. Satheeshkumar, R. Ganesh Narayanan Influence of pre-generated infinite adhesive defects on the forming behaviour of adhesive bonded steel sheets 2014 Advanced Materials Research 939() 328-335
V.K. Jain, U.S. Dixit, Christ Paul and Arvind Kumar Micromanufacturing: A review 2014 Proc. IMechE, Part B:, Journal of Engineering Manufacture 228() 995-1014

Authors Title Year Journal Volume (Issue) Pages
A. Bhowmik, R. Singh, R. Repaka, S.C. Mishra Conventional and newly developed bioheat transport models in vascularized tissues: A review 2013 Journal of Thermal Biology 38(-) 107-125
A. Ghosh, N. Barman, H. Chattopadhyay, and S. Bag Modelling of heat transfer in submerged arc welding process 2013 Proceedings of IMechE, Part B: Journal of Engineering Manufacture 227(10) 1467-1473
A. Mishra and U.S. Dixit Determination of thermal diffusivity of the material, absorptivity of the material and laser beam radius during laser forming by inverse heat transfer 2013 Journal of Machining and Forming Technologies 5(3/4.) 207-226
A. Sinha, K. A. Raman, H. Chattopadhyay and G. Biswas Effects of different orientations of winglet arrays on the performance of plate-fin heat exchangers 2013 International Journal of Heat and Mass Transfer 57(-) 202-214
A. Trivedi, D. Srinivasan, D. Sharma, C. Singh Evolutionary Multi-objective Day-Ahead Thermal Generation Scheduling in Uncertain Environment 2013 Power Systems, IEEE 28(2) 1345-1354
B John, V Kulkarni and G Natarajan Shock wave-boundary layer interactions in hypersonic flows 2013 International Journal of Heat and Mass Transfer 70(-) 81-90
B. J. Bora, B. K. Debnath, N. Gupta, N. Sahoo and U. K. Saha Investigation on the flow behaviour of a venturi type gas mixer designed for dual fuel diesel engines 2013 International Journal of Engineering Technology and Advanced Engineering 3(-) 202-209
B. K. Debnath, N. Sahoo and U. K. Saha Thermodynamic analysis of a variable compression ratio diesel engine running with palm oil methyl ester 2013 Energy Conversion and Management 65(-) 147-154
B. K. Debnath, N. Sahoo and U. K. Saha Adjusting the operating characteristics to improve the performance of an emulsified palm oil methyl ester run diesel engine 2013 Energy Conversion and Management 69(-) 191-198
B. K. Debnath, U. K. Saha UK and N. Sahoo An experimental way of assessing the application potential of emulsified palm biodiesel towards alternative diesel 2013 Journal of Engineering for Gas Turbines and Power 136(2) 1-2
B. Nayak, S.K. Dwivedy and K.S.R.K. Murthy Dynamic stability of magnetorheological elastomer based adaptive sandwich beam with conductive skins using FEM and the harmonic balance method 2013 International Journal of Mechanical Sciences 77(-) 205-216
B. Ray, G. Biswas, A. Sharma, and S.W.J. Welch CLSVOF method to study consecutive drop impact on liquid pool 2013 International Journal of Numerical Methods for Heat & Fluid Flow 23(-) 141-158
Bhardwaj, S., Dalal, A. Analysis of Natural Convection Heat Transfer and Entropy Generation inside Porous Right-angled Triangular Enclosure 2013 International Journal of Heat and Mass Transfer 65(-) 500-513
Bibin J. and Kulkarni V. N Investigation for energy deposition technique for drag reduction at hypersonic speeds 2013 Applied Mechanics and Materials 367(-) 222-227
Bora BJ, Debnath BK, Gupta N, Saha UK, and Sahoo N Investigation on the Flow Behaviour of a Venture Type Gas Mixer for Dual Fuel Diesel Engines 2013 International Journal of Emerging Technology and Advanced Engineering 3(-) 202-209
C. Patel, Sumitesh Das, R. Ganesh Narayanan CAFE modeling, neural network modeling, and experimental investigation of friction stir welding, Proc. of the IMecheE 2013 Part C: Journal of Mechanical Engineering Science 227(6) 1164-1176
D. A. Perumal, A. K. Dass Application of Lattice Boltzmann method for incompressible viscous flows 2013 Applied Mathematical Modelling 37(6) 4075-4092
D. Bandopadhya A Lambert W Function Approach for Solution of Delay Response of an Active Actuator via Pseudo-Rigid Body Modeling Technique 2013 International Journal of Research in Mathematics 1(1) 1-7
D. Biswal, D. Bandopadhaya and S.K. Dwivedy Investigation and evaluation of effect of dehydration on vibration characteristics of silver-electroded ionic polymer–metal composite actuator 2013 Journal of Intelligent Material Systems and Structures 24(10) 1197-1212
D. J. Bordoloi and R. Tiwari Optimization of Controller Parameters of Active Magnetic Bearings in Rotor-Bearing Systems. 2013 Advances in Vibration Engineering 12(4) 319-327
D. J. Bordoloi and R. Tiwari Optimization of Support Vector Machine based Multi-Fault Classification with Evolutionary Algorithms from the Time Domain Vibration Data of Gears. 2013 Journal of Mechanical Engineering Science 227(11) 2428-2439
D. Sharma, A. Trivedi, D. Srinivasan, L. Thillainathan Multi-agent modeling for solving profit based unit commitment problem 2013 Applied soft computing 13(8) 3751-3761
D. Soren, P. Gupta, M. Ravi Sankar, S. P. Rajagopal, V. Ganesh, A.V. Lanjewar Tribomechanical and Tribochemical Wear of Human Dental Enamel 2013 International Journal of Advanced Materials Manufacturing and Characterization 3(1) 119-125
Debnath BK, Saha UK, Sahoo N Effect of Compression Ratio and Injection Timing on the Operating Characteristics of a Diesel Engine Run on Palm Oil Methyl Ester 2013 Proc. of the IMechE, Part–A: Journal of Power and Energy 227(-) 368-382
DN Basu, ND Patil, S Bhattacharyya and PK Das Hydrodynamics of a Natural Circulation Loop in a Scaled-down Steam Drum-Riser-Downcomer Assembly 2013 Nuclear Engineering and Design 265(-) 411-423
DN Basu, S Bhattacharyya and PK Das Dynamic Response of a Single-phase Rectangular Natural Circulation Loop to Different Excitations of Input Power 2013 International Journal of Heat and Mass Transfer 65(-) 131-142
DN Basu, S Bhattacharyya and PK Das Influence of Geometry and Operating Parameters on the Stability Response of Single-phase Natural Circulation Loop 2013 International Journal of Heat and Mass Transfer 58(-) 322-334
DN Basu, S Bhattacharyya and PK Das Development of a Unified Model for the Steady-state Operation of Single-phase Natural Circulation Loops 2013 International Journal of Heat and Mass Transfer 62(-) 452-462
Eswaran M, Virk AS, and Saha UK Numerical Simulation of 2-D and 3-D Sloshing Waves in a Regularly and Randomly Excited Container 2013 Journal of Marine Science and Application 12(-) 298-314
Ghatule P., Kore S. D. Coupled 3D Finite Element Modeling of Electromagnetic Free Expansion of Al Tube 2013 Internaional Journal of Advanced Materials Manufacturing and Characterisation 3(1) 95-98
Girish O., Reddy N., Jammy S. and Kulkarni V. N Conjugate Heat Transfer Analysis for Hypersonic Flow Over Finite Thickness Flat Plate 2013 Journal of Aerospace Engineering 26(4) 708-714
H. K. Mohanty, M. M. Mahapatra, P. Kumar, Biswas P. and N. R. Mandal. Predicting the effects of tool geometries on friction stirred aluminum welds using artificial neural networks and fuzzy logic techniques 2013 International Journal of Manufacturing Research (IJMR) 8(3) 296-312
H. Sarangi, K.S.R.K. Murthy and D. Chakraborty Experimental verification of optimal strain gage locations for the accurate determination of mode I stress intensity factors 2013 Engineering Fracture Mechanics 110(-) 189-200
I. Chakraborty, G. Biswas and P.S. Ghoshdastidar A coupled level-set and volume-of-fluid method for the buoyant rise of gas bubbles in liquids 2013 International Journal of Heat and Mass Transfer 58(-) 240-259
K. Das and S.C. Mishra Estimation of tumor characteristics in a breast tissue with known skin surface temperature 2013 Journal of Thermal Biology 38(-) 311-317
K. Das, R. Singh and S.C. Mishra Numerical analysis for determination of the presence of a tumor and estimation of its size and location in a tissue 2013 Journal of Thermal Biology 38(-) 32-40
Kalita P., Clifford M., Kalita K., Saha U. K., and Mahanta P. Characterization and analysis of thermal response of rice husk for gasification applications 2013 Journal of Renewable and Sustainable Energy 5(1) 13119-13134
Kant R. and  Joshi S.N. Finite Element Simulation of Laser Assisted Bending with Moving Mechanical Load 2013 International Journal of Mechatronics and Manufacturing Systems (Inderscience) 6(4) 351-366
Karthick Selvam, Muthukumar P, Linder M, Mertz R, Kulenovic R Measurement of thermochemical properties of some metal hydrides - titanium (Ti), misch metal (Mm) and lanthanum (La) based alloys 2013 Int. J. Hydrogen Energy 38(-) 5288-5301
Kirtania, S. and Chakraborty, D. Fracture behavior of carbon nanotube-based composites with a broken fiber using multi-scale finite element modeling 2013 Journal of Computational and Theoretical Nanoscience 11(3) 676-684
Konwar R. S., Kalita K., Banerjee A., and Khoo W. K. S. Electromagnetic Analysis of a bridge con-figured winding cage induction machine using finite element method 2013 Progress in Electromagnetics Research B 48(-) 347-373
L.-M. Armstrong, S.Gu, K.H.Luo, P. Mahanta Multifluid Modeling of the Desulfurization Process within a Bubbling Fluidized Bed Coal Gasifier 2013 AIChE Journal 59(6) 1952-1963
Likhendra Prasad, Muthukumar P Design and optimization of labscale sensible heat storage prototype for solar thermal power plant application 2013 Solar Energy 97(-) 217-229
M. Baruah and S. Bag Numerical modelling of heat transfer and fluid flow in laser microwelding 2013 International Journal of Mechatronics and Manufacturing Systems 6(13) 310-334
M. Chandrasekaran, M. Muralidhar and U.S. Dixit Online Optimization of Multipass Machining Based on Cloud Computing 2013 International Journal of Advanced Manufacturing 65(1) 239-250
Mohit Lal and R. Tiwari Quantification of Multiple Fault Parameters in Flexible Turbo-Generator Systems with Incomplete Rundown Data. 2013 Mechanical Systems and Signal Processing 41(1-2.) 546-563
Mukesh Kumar, Satish V. Kailas, R. Ganesh Narayanan Influence of external weld flash on the in-plane plane-strain formability of friction stir welded sheets 2013 Journal of Strain Analysis for Engineering Design 48(-) 376-385
Muthukumar P, Satheesh A Analysis of crossed vant Hoff metal hydride based heat pump 2013 Int. J. Hydrogen Energy 38(-) 11415-11420
N. Naresh Kumar, P. S. Rama Sreekanth, S. Kanagaraj Effect of gamma-irradiation on thermal properties of MWCNTs reinforced high density polyethylene 2013 Advanced Nanomaterials and Nanotechnology 143(-) 408-418
N. Shanmugapriya, C. Somayaji, S. Kanagaraj Optimization of Ceria-Zirconia solid solution based on OSC measurement by cyclic heating process 2013 Procedia Engineering 64(-) 1235-1241
N. Yadaiah and S. Bag Effect of heat source parameters in thermal and mechanical analysis of linear GTA welding process 2013 ISIJ International 52(11) 2069-2075
N. Yadaiah and S. Bag Role of oxygen as surface active element in linear GTA welding process 2013 Journal of Materials Engineering and Performance 22(11) 3199-3209
N.K. Mishra, P. Muthukumar, S.C. Mishra Performance tests on medium-scale porous radiant burners for LPG cooking applications 2013 International  Journal of Emerging Technology and Advanced Engineering 3(-) 126-130
N.S.Priya, C. Somayaji, S.Kanagaraj Oxygen storage capacity of CexZr1-xO2 (0.4?x?0.8) solid solution using thermo-gravimetric analysis 2013 Advanced Materials Research 747(-) 579-582
P S Rama Sreekanth, N Ravindra Reddy, Mangala Lahkar, S Kanagaraj Biocompatibility studies on MWCNTs reinforced UHMWPE nanocomposites 2013 Trends in Biomaterials & Artificial Organs 21(-) 1-9
P S Rama Sreekanth, S Kanagaraj Restricting the ageing degradation of the mechanical properties of gamma irradiated UHMWPE using MWCNTs 2013 Journal of the Mechanical Behavior of Biomedical Materials 21(-) 57-66
P S Rama Sreekanth, S Kanagaraj Assessment of bulk and surface properties of medical grade UHMWPE based nanocomposites using Nanoindentation and microtensile testing 2013 Journal of the Mechanical Behavior of Biomedical Materials 18(-) 140-151
P. Janaki Ramulu, R. Ganesh Narayanan Experimental evaluation and prediction of forming limit of FSW blanks made of AA 6061 T6 sheets at different weld orientations and weld locations 2013 Materialwissenschaft und Werkstofftechnik 44(6) 527-540
P. Kalita, U. K. Saha, P. Mahanta, Effect of biomass blending on hydrodynamics and heat transfer behavior in a pressurized circulating fluidized bed unit 2013 International Journal of Heat and Mass Transfer 60(1) 531-541
P. Kalita, U. K. Saha, P. Mahanta Parametric study on the hydrodynamics and heat transfer along the riser of a pressurized circulating fluidized bed unit 2013 Experimental Thermal and Fluid Science 44(-) 620-630
P. Kumari, S Kapuria, RKND Rajapakse Three-dimensional extended Kantorovich solution for Levy-type rectangular laminated plates with edge effects 2013 Composite Structure 107(1) 167-176
P. Muthukumar, Shyamkumar Development of a novel porous radiant burner for LPG cooking applications 2013 Fuel 112(-) 562-566
P.Kalita, M.J.Clifford, K.Jiamjiroch, K.Kalita, P.Mahanta, U.K. Saha Characterization and analysis of thermal response of rice husk for gasification applications 2013 Journal of Renewable and Sustainable Energy 5(1) 13119-13134
Peetala R. K., Sahoo N. and Kulkarni V. N. Prediction of short duration transient surface heat flux using various analytical techniques 2013 Heat transfer – Asian Research 42(6) 530-543
R. Kumar and N. Sahoo Dynamic calibration of K-type coaxial thermocouple for transient measurement 2013 ASME International Journal of Heat Transfer 135(12) 1-7
R. Tiwari, D. J. Bordoloi, S. Bansal and S. Sahoo Application of Wavelet Analysis in Multi-class Fault Diagnosis of Gear using SVM 2013 International Journal of Condition Monitoring & Diagnostic Engineering 16(3) 17-24
R.P. Chopade, V. Mohan, R. Mayank, R. Uppaluri and S.C. Mishra Simultaneous retrieval of parameters in a transient conduction-radiation problem using differential evolution algorithm 2013 Numerical Heat Transfer, Part A 63(-) 373-395
Randive, P., Dalal, A. Capillarity-induced Resonance of Blobs in a 3-D Duct: Lattice Boltzmann Modelling 2013 International Journal of Heat and Mass Transfer 65(-) 635-648
Roy S, and Saha UK Review on the Numerical Investigations into the Design and Development of Savonius Wind Rotors 2013 Renewable and Sustainable Energy Reviews 24(-) 73-83
Roy S, and Saha UK Review of Experimental Investigations into the Design, Performance and Optimization of the Savonius Rotor 2013 Proc. of the IMechE, Part–A: Journal of Power and Energy 227(-) 528-542
Roy S, and Saha UK Computational Study to Assess the Influence of Overlap Ratio on Static Torque Characteristics of a Vertical Axis Wind Turbine 2013 Procedia Engineering 51(-) 694-702
S Samanta and DN Basu Modeling of a Solar Assisted Water-LiBr Absorption Refrigeration System for Summer Airconditioning of an Office Room 2013 International Journal of Emerging Technology and Advanced Engineering 3(3) 368-375
S. Arun, S. Kanagaraj Effect of reinforcement and processing methods in PP/MWCNTs nanocomposites 2013 Advanced Materials Research 747(-) 575-578
S. Bag Recent advances in laser microwelding 2013 KIRAN: A Bulletin of Indian Laser Association 24(2) 23-31
S. Bansal, S. Sahoo, and R. Tiwari and D. J. Bordoloi Multiclass Fault Diagnosis in Gears Using Support Vector Machine Algorithms Based on Frequency Domain Data. 2013 Measurement 40(-) 3469-3481
S. Kapuria, P. Kumari Extended Kantorovich method for three-dimensional piezoelasticity solution of edge effects in hybrid plates 2013 Proceeding of Royal Society A 469(2151) 1471-2946
S. P. Rajagopal, V. Ganesh, A.V. Lanjewar, M. Ravi Sankar, P. Gupta, D. Soren Past and Current Status of Hybrid Electric Discharge Machining (H-EDM) Processes 2013 International Journal of Advanced Materials Manufacturing and Characterization 3(1) 111-118
S. S. Gautam, and R. A. Sauer An Energy-momentum-conserving Temporal Discretization Scheme for Adhesive Contact Problems 2013 International Journal of Numerical Methods in Engineering 93(10) 1057-1081
S.C. Mishra and H. Sahai Analyses of non-Fourier conduction and radiation  in a  cylindrical medium using lattice Boltzmann method and finite volume method 2013 International Journal of Heat and Mass Transfer 61(-) 41-45
Sarkar, S., Ganguly, S., Dalal, A. Buoyancy Driven Flow and Heat Transfer of Nanofluids Past a Square Cylinder in Vertically Upward Flow 2013 International Journal of Heat and Mass Transfer 59(-) 433-450
Sarkar, S., Ganguly, S., Dalal, A., Saha, P., Chakraborty, S. Mixed Convective Flow Stability of Nanofluids past a Square Cylinder by Dynamic Mode Decomposition 2013 International Journal of Heat and Fluid Flow (in press) 44(-) 624-634
Satya Sekhar B, Muthukumar P Studies on metal hydride based single-stage heat transformer 2013 Int. J. Hydrogen Energy 38(-) 7178-7187
Satya Sekhar B, Muthukumar P Performance tests on a double-stage metal hydride based heat transformer 2013 Int. J. Hydrogen Energy 38(-) 15428-15437
Satya Sekhar B, Muthukumar P and Suresh P Performance investigations of the metal hydride based hydrogen storage devices 2013 Int J Hydrogen Energy 38(-) 9570-9577
Satyajit Panda and Gavhane G. Sopan Nonlinear analysis of smart functionally graded annular sector plates using cylindrically orthotropic piezoelectric fiber reinforced composite 2013 International Journal of Mechanics and Materials in Design 9(-) 35-53
U. Barman, A.K. Sen, and S. C. Mishra Theoretical and numerical investigations of an electroosmotic flow micropump with interdigitated electrodes 2013 Microsystem Technologies 20(1) 157-168
V. Waghole and R. Tiwari Optimization of Needle Roller Bearing Design using Novel Hybrid Methods 2013 Mechanism and Machine Theory 72(-) 71-85
V. Yadav, J. Thakuria, A.K. Singh and U.S. Dixit An approximate fast finite element analysis of temperature distribution in rolling 2013 Int. J. Mechatronics and Manufacturing Systems 6(4) 381-396

Authors Title Year Journal Volume (Issue) Pages
A Pal, D. Bandyopadhyay, G. Biswas and V. Eswaran Enhancement of Heat Transfer Using Delta-Winglet Type Vortex Generators with a Common Flow Up Arrangement 2012 Numerical Heat Transfer Part A 61(-) 912-928
A. Banerjee Simulation of SMA wire actuator behavior under arbitrary thermo-mechanical Loading 2012 Smart Materials and Structures 21(-) -
A. N. Reddy and G. K. Ananthasuresh A numerical approach to determine the sufficiency of given boundary data sets for uniquely estimating interior elastic properties 2012 Inverse Problems in Science and Engineering 20(7) 1057-1077
Abhishek T. Dhumal, R. Ganesh Narayanan, G. Saravana Kumar Simulation based expert system to predict the tensile and deep drawing behavior of tailor welded blanks 2012 International Journal of Modeling, Identification and Control 15(3) 164-172
ARIJIT Biswas&P. Mahanta Design and experimental analysis of condenser for the production of bamboo vinegar 2012 International Journal of Applied Research in Mechanical Engineering 2(2) 79-86
B. B. Sahoo U.K. Saha and N. Sahoo Demonstration of dual fuel technology – Gas and diesel for the future 2012 International Journal of Engineering Science Research 3(-) 559-565
B. B. Sahoo, N. Sahoo and U. K. Saha Effect of H2:CO ratio in syngas on the performance of a dual fuel diesel engine operation 2012 Applied Thermal Engineering 49(-) 131-146
B. B. Sahoo, U. K. Saha U.K. and N. Sahoo Diagnosing the effects of pilot fuel quality on availability terms in a biogas run dual fuel diesel engine 2012 International Journal of Exergy 10(1) 77-93
B. K. Debnath, U. K. Saha and N. Sahoo Effect of hydrogen-diesel quantity variation on brake thermal efficiency of a dual fuelled diesel engine 2012 Journal of Power Technologies 92(1) 55-67
B. K. Debnath, U. K. Saha and N. Sahoo Effect of compression ratio and injection timing on the performance characteristics of a diesel engine running on palm oil methyl ester, Journal of Power and Energy 2012 Proceedings of the Institution of Mechanical Engineers (IMechE, Part A) 227(-) 368-382
B. Nayak, S. K. Dwivedy and K.S.R.K Murthy Vibration analysis of a three-layer MRE embedded sandwich beam with conductive skins using FEM, Proceedings of the Institution of Mechanical Engineers 2012 Part C, Journal of Mechanical Engineering Science 227(4) 714-729
B. Nayak, S.K. Dwivedy and K.S.R.K. Murthy Multi-frequency excitation of magnetorheological elastomer-based sandwich beam with conductive skins 2012 International Journal of Non-linear Mechanics 47(5) 448-460
B. Nayak, S.K. Dwivedy and K.S.R.K. Murthy Vibration analysis of a three-layer MRE embedded sandwich beam with conductive skins using finite element method 2012 Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science 227(-) 4714-4729
B. Ray, G. Biswas and A. Sharma Oblique Drop Impact on Deep and Shallow Liquid 2012 Commun. Comput. Phys. 11(-) 1386-1396
B. Ray, G. Biswas and A. Sharma Bubble pinch-off and scaling during liquid drop impact on liquid pool 2012 Physics of Fluids 24(-) 082108-1 -11
B. Ray, P.D.S. Reddy, D. Bandyopadhyay, A. Sharma, S. Qian and G. Biswas Surface Instability of a Thin Electrolyte Film Undergoing Coupled Electroosmotic and Electrophoretic Flows in a Microfluidic Channel 2012 Electrophoresis 32(-) 3257-3267
B. Ray, P.D.S. Reddy, D. Bandyopadhyay, S.W. Joo, A. Sharma, S. Qian and G. Biswas Instabilities in Free-surface Electroosmotic Flows 2012 Theory of Computational Fluid Dynamics 26(-) 311-318
B.Buragohain, P.Mahanta, V.S. Moholkar Performance correlations for biomass gasifiers using semi-equilibrium non-stoichiometric thermodynamic models 2012 International Journal of Energy Research 36(5) 590-618
Bhinder, A. P. S., Sarkar, S., Dalal, A. Flow over and Forced Convection Heat Transfer around a Semi-circular Cylinder at Incidence 2012 International Journal of Heat and Mass Transfer 55(19-20) 5171-5184
Biswas P., Kumar D. A. and Mandal N. R. Friction stir welding of aluminum alloy with varying tool geometry and process parameters 2012 Proc. IMechE Part-B, J. Engineering Manufacture 226(4) 641-648
Biswas Pankaj, Mandal N. R. and Sha O.P. Numerical and dimensional analysis for prediction of line heating residual deformations 2012 Journal of Marine Science and Application 9(-) 14-21
C. Patel, R. Ganesh Narayanan, Sumitesh Das Predicting the grain size and strength during friction stir welding by Cellular automata based finite element (CAFE) analysis 2012 International Journal of Advanced Manufacturing Systems 14(2) 27-34
C. Shravan and R. Tiwari Identification of Stiffness and Periodic Breathing Forces of A Transverse Switching Crack in a Laval Rotor. 2012 Fatigue and Fracture of Engineering Materials and Structures 36(-) 254-269
Chakraborty, D., Rathore, P. K. and Roy T. Optimal Actuators Locations in Smart Fibre Reinforced Polymer Structures Using Genetic Algorithm 2012 Applied Mechanics and Materials 110-116(-) 1278-1283
D. A. Perumal, G. V. S. Kumar, A. K. Dass Lattice Boltzmann Simulation of Viscous flow past elliptical cylinder 2012 CFD letters 4(3) 127-139
D. A. Perumal, G. V. S. Kumar, A. K. Dass Numerical Simulation of Viscous Flow over a Square Cylinder Using Lattice Boltzmann Method 2012 ISRN Mathematical Physics 2012(-) 1-16
D. Biswal, D. Bandopadhaya and S.K. Dwivedy Electro-Mechanical and Thermal Characteristics of Silver-Electroded Ionic Polymer Metal Composite (IPMC) Actuator 2012 Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science 226(6) 1427-1436
D. Chatterjee, G. Biswas and S. Amiroudine Mixed Convection Heat Transfer from an In-line Row of Square Cylinders in Cross-Flow at Low Reynolds Number 2012 Numerical Heat Transfer Part A 61(-) 891-911
D. K. Biswal, D. Bandopadhya , and S. K. Dwivedy Preparation and experimental investigation of thermo-electro-mechanical behavior of Ag-IPMC Actuator 2012 International Journal of Precision Engineering and Manufacturing 13(5) 777-782
D. K. Biswal, D. Bandopadhya , and S. K. Dwivedy Fabrication and thermo mechanical analysis of pure silver-electrode ionic polymer-metal composite (IPMC) actuator 2012 Applied Mechanics and Materials 110-116(-) 1199-1206
D. Sharma, K. Deb and N. N. Kishore Customized Evolutionary Optimization Procedure for Generating Minimum Weight Compliant Mechanisms 2012 Engineering Optimization 46(1) 39-60
D.S. Kumar, A.K. Dass and A. Dewan Multiple Stable Solutions for Two- and Four-Sided Lid-Driven Cavity Flows Using FAS Multigrid Method 2012 Engineering e-Transaction 7(-) 96-106
David Santosh Christopher , P. Rajesh Kanna, G. Madhusudhana, P. Venkumar, H. A. Mohammed Numerical Investigation of Heat Transfer from Two-Dimensional Sudden Expansion Flow using Nanofluids 2012 Numerical Heat Transfer, Part A 61(-) 527-546
David Santosh Christopher, G. R. Madhusudhana, P. Venkumar, P. Rajesh Kanna, H. A. Mohammed Numerical investigation on laminar flow due to sudden expansion using nanofluids 2012 Journal of Computational and Theoretical Nanoscience 9(-) 2217-2227
Deep Sharma and S. K. Dwivedy Design and Fabrication of an Autonomous Mobile Robot for Obstacle Avoidance and Path Planning in partially known Environment 2012 Advanced Material Research 403-408(-) 3917-3924
DN Basu, ND Patil, S Bhattacharyya and PK Das Experimental Investigations of Droplet Carryover from the Separator Drum of an Air-lift Loop Simulating a Scaled-down AHWR 2012 Experimental Thermal and Fluid Sciences 42(-) 163-173
DN Basu, S Bhattacharyya and PK Das Performance Comparison of Rectangular and Toroidal Natural Circulation Loops under Steady and Transient Conditions 2012 International Journal of Thermal Sciences 57(-) 142-151
G. Biswas, H. Chattopadhyay and A. Sinha Augmentation of Heat Transfer by Creation of Streamwise Longitudinal Vortices using Vortex Generators 2012 Heat Transfer Engineering 33(-) 406-426
Ganesh, N. and Balakrishnan, N. A h--adaptive algorithm using residual error estimates for fluid flows 2012 Communications in Computational Physics 13(2) 461-478
H. K. Mohanty, M. M. Mahapatra, Biswas P. and N. R. Mandal Modeling the Effects of Tool Shoulder and Probe Profile Geometries on Friction Stirred Aluminum Welds Using Response Surface Methodology 2012 J. Marine Sci. Appl. 11(4) 493-504
H. K. Mohanty, M. M. Mahapatra, Biswas Pankaj and Mandal N. R. Effect of tool shoulder and pin probe profiles on friction stirred aluminum welds–A comparative study 2012 Journal of Marine Science Application 11(-) 200-207
H. K. Mohanty, M. M. Mahapatra, P. Kumar, Biswas Pankaj and N R Mandal Study on the effect of tool profiles on temperature distribution and material flow characteristics in friction stir welding 2012 Proc. IMechE Part-B, J. Engineering Manufacture 226(9) 1527-1535
H. Sarangi, K.S.R.K. Murthy and D. Chakraborty Optimum strain gage locations for accurate determination of the mixed mode stress intensity factors 2012 Engineering Fracture Mechanics 88(-) 63-78
H. Sarangi, K.S.R.K. Murthy and D. Chakraborty Extent of three Parameter Zone and Optimum Strain Gage Location for Eccentric Cracked Configurations 2012 Applied Mechanics and Materials 110-116(-) 127-134
Hegde G. M., Kulkarni V. N,. Nagabhoopathy and Reddy K.P.J Structure and morphology studies of chromium film at elevated temperature in hypersonic environment 2012 Bulletin of Material Science 35(3) 341-345
J. K. Doley, S.D. Kore Studies on Temperature Distribution in Electromagnetic Welding Process 2012 ASTM 1(1) 73-84
J.K. Doley, S.D. Kore Fully Coupled Numerical Simulation of Electromagnetic Forming 2012 Key Engineering Materials 504-506(-) 1201-1206
Jagu S. Rao and R. Tiwari Optimum Design and Analysis of Axial Hybrid Magnetic Bearings Using Multi-Objective Genetic Algorithms. 2012 International Journal for Computational Methods in Engineering Science and Mechanics 13(-) 10-27
Kalita P, Saha UK, and Mahanta P An Experimental Investigation of Hydrodynamics and Heat Transfer Characteristics of Biomass in a Pressurized Circulating Fluidized Bed 2012 International Energy Journal 13(-) 63-74
Kirtania, S. and Chakraborty, D. Multi-scale modeling of carbon nanotube reinforced composites with a fiber break 2012 Materials and Design 35(-) 498-504
L. Boriwal, M. M. Mahapatra, and P. Biswas Modelling and optimizing the effects of process parameters on galvanized steel sheet resistance spot welds 2012 Proc. IMechE Part B: J. Engineering Manufacture 226(4) 664-674
M. Hazarika, U.S. Dixit, S. Deb A method for fine tuning the membership grades assigned by experts: an application to burr height estimation in drilling 2012 Journal of Manufacturing Technology Research, Journal of Manufacturing Technology Research 4(1-2.) 75-87
M. Lal and R. Tiwari Multi-fault Identification in Simple Rotor-Bearing-Coupling Systems based on Forced Response Measurements. 2012 Mechanism and Machine Theory 51(-) 87-109
M. Ravi Sankar, V. K. Jain, and J. Ramkumar Effect of Abrasive Medium ingredients on finishing of Al alloy and Al alloy/SiC Metal Matrix Composites using Rotational Abrasive Flow Finishing 2012 Applied Mechanics and Materials 110-116(-) 1328-1335
M. Ravi Sankar, V. K. Jain, J. Ramkumar, Y. M. Joshi Dependence of R-AFF process on Rheological Characteristics of Soft styrene based organic polymer abrasive medium 2012 International Journal of Manufacturing Technology Research 4(1-2.) 89-104
M. Sivasankar, K. Siva Sankar Reddy, T. Benarjee, S. K. Dwivedy, D. Chakraborty Wear Analysis of Acetabular Cup for Daily Activities 2012 Indian Journal of Biomechanics 3(1-2.) 13-19
M. Sivasankar, K. Siva Sankar Reddy, T. Benarjee, S. K. Dwivedy, D. Chakraborty Wear Analysis of Ace tabular Cup for Daily Activities 2012 Indian Journal of Biomechanics 3(1-2.) 13-19
Madhusudhana Gavara Natural convection in a vertical channel with arrays of flush-mounted heaters on opposite conductive walls 2012 Numerical Heat Transfer, Part A 62(-) 111-135
Madhusudhana Gavara Natural convection in a series of thermally interacting cavities with wall mounted heaters 2012 Numerical Heat Transfer, Part A 62(-) 861-883
Madhusudhana Gavara Asymmetric forced convection of nanofluids in a channel with symmetrically mounted rib heaters on opposite walls 2012 Numerical Heat Transfer, Part A 62(-) 884-904
Madhusudhana Gavara, P. Rajesh Kanna Study of conjugate natural convection between vertical coaxial rectangular cylinders 2012 International Communications in Heat and Mass Transfer 39(-) 904-912
Madhusudhana Gavara, Pradip Dutta, K.N. Seetharamu Mixed convection adjacent to non-isothermal vertical surfaces 2012 International Journal of Heat and Mass Transfer 55(-) 4580-4587
Manas Das, V.K. Jain, P.S Ghoshdastidar Nanofinishing of flat workpieces using Rotational - Magnetorheological Abrasive Flow Finishing (R-MRAFF) Process 2012 International Journal of Advanced Manufacturing Technology 62(-) 405-420
Manas Das, V.K. Jain, P.S Ghoshdastidar CFD simulation and experimental investigations into magnetic field assisted nano-finishing process 2012 Proc. IMechE Part B: J Engineering Manufacture 226(7) 1143-1158
Mazumdar A., Talukdar S., and Kalita K. Comparative Analysis of an Elastic 2 Degree of Freedom Vehicle Ride Model with a Rigid 2 Degree of Freedom Model 2012 International Journal of Research in Engineering and Technology 2(10) 11-24
Muthukumar P, Lakshmi DVN Thermodynamic analysis of a thermally operated cascade sorption heat pump for continuous cold generation 2012 International Journal of Energy and Environment 4(1) 161-174
Muthukumar P, Patel KS, Sachan P, Singhal N Computational study on metal hydride based three-stage hydrogen compressor 2012 International Journal of Hydrogen Energy 37(-) 3797-3806
Muthukumar P, Singhal A, Bansal GK. Thermal modeling and performance analysis of industrial-scale metal hydride based hydrogen storage container 2012 International Journal of Hydrogen Energy 37(-) 14351-14364
Narendra Singh, Gaurav Chand, S. Kanagaraj Investigation of thermal conductivity and viscosity of carbon nanotubes-Ethylene glycol nanofluids 2012 Heat Transfer Engineering 33(9) 821-827
P S Rama Sreekanth, N Naresh Kumar, S Kanagaraj Effect of MWCNT on mechanical properties of g -irradiated UHMWPE during shelf ageing process 2012 Advanced Materials Research 410(-) 160-163
P S Rama Sreekanth, N Naresh Kumar, S Kanagaraj Improving post irradiation stability of high density polyethylene by multi walled carbon nanotubes 2012 Composites Science and Technology 72(-) 390-396
P. Janaki Ramulu, R. Ganesh Narayanan Weld zone representation methods during the stretching of friction stir welded blanks with dissimilar sheet thickness: A study using numerical simulations 2012 Materialwissenschaft und Werkstofftechnik 43(3) 241-252
P. Janaki Ramulu, R. Ganesh Narayanan, Satish V. Kailas, Jayachandra Reddy Formability evaluation of FSW blanks made of aluminum sheet: Influence of welding speed and tool rotation speed 2012 Advanced Materials Research 410(-) 287-290
P. Janaki Ramulu, R. Ganesh Narayanan, Satish V. Kailas, Jayachandra Reddy Internal defect and process parameter analysis during friction stir welding of Al 6061 sheets 2012 International Journal of Advanced Manufacturing Technology 65(9-12.) 1515-1528
P.S. Robi, Sanjib Banerjee1 and A. Srinivasan Deformation Mechanism Maps for Al-Cu-Mg alloys microalloyed with Tin 2012 Advanced Materials Research 410(-) 283-286
Perumalla Janaki Ramulu, Satish V. Kailas, R. Ganesh Narayanan Influence of tool rotation speed and feed rate on forming limit of friction stir welded AA6061-T6 sheets 2012 Proc. of the IMecheE, Part C: Journal of Mechanical Engineering Science 227(3) 520-541
R. Das, U.S. Dixit, S. Deb Effect of extrusion ratio, die land length and lubrication on hardness and surface roughness in multi-hole extrusion 2012 Journal of Manufacturing Technology Research 4(1-2.) 35-47
R. Das, U.S. Dixit and S. Deb An experimental study on the effect of lubrication, die land length and vibration in multi-hole extrusion process 2012 Journal of Machining and Forming Technologies 4(1) 141-153
R. Kumar and N. Sahoo Design, fabrication and sensitivity analysis of the resistance temperature detector thin film sensors 2012 International Journal of Mechanical and Industrial Engineering 2(4) 20-25
R. Kumar, N. Sahoo and V. Kulkarni Conduction based calibration of handmade platinum thin film heat transfer gauges for transient measurements 2012 International Journal of Heat and Mass Transfer 55(11-Sep) 2707-2713
R. Kumar, P. Jayesh and N. Sahoo Analysis of one dimensional inverse heat conduction problem: A Review 2012 International Journal of Mechanical & Industrial Engineering 3(1) 2231-2239
R. P. Chopade, S.C. Mishra, P. Mahanta, S. Maruyama, and A. Komiya Uniform thermal conditions on 3-D object: Optimal power estimation of panel heaters in a 3-D radiant enclosure 2012 International Journal of Thermal Sciences 51(1) 73-76
R. Tiwari, K. Sunil Kumar and R. S. Reddy An Optimum Design Methodology of Tapered Roller Bearing Using Genetic Algorithms. 2012 International Journal for Computational Methods in Engineering Science and Mechanics 13(-) 108-127
R.P. Chopade, S.C. Mishra, P. Mahanta, S. Maruyama Estimation of power of heaters in a radiant furnace for uniform thermal conditions on 3-D irregular shaped objects 2012 International Journal of Heat and Mass Transfer 55(15-16) 4340-4351
Rajiv Sharma, S Kanagaraj Prepation and characterization of surfactant coated Ce-Zr nanoparticles and nanofuel 2012 Journal of ASTM International (ASTM Special Technical Publication) 1567(-) 64-78
Ravi Kant, R. Ganesh Narayanan In-plane testing behavior of adhesive-bonded steel sheets: Influence of sheet surface roughness adhesive thickness, and bonding width 2012 Journal of Testing and Evaluation 40(2) 97-106
Ravindra S. Saluja, R. Ganesh Narayanan, Sumitesh Das Cellular automata finite element (CAFE) model to predict the forming of friction stir welded blanks 2012 Computational Materials Science 58(-) 87-100
S Bhattacharyya, DN Basu and PK Das Two-phase Natural Circulation Loops: A Review of the Recent Advances 2012 Heat Transfer Engineering 33(4-5.) 461-482
S. Bag Adverse effect of surface active element transport in conduction mode laser welding process 2012 KIRAN: A Bulletin of Indian Laser Association 23(2) 6-10
S. Bag, D. V. Kiran, Arshad A. Syed and A. De Efficient estimation of volumetric heat source in fusion welding process simulation 2012 Welding in the World 56(11-12.) 88-97
S. Banerjee, P. S. Robi and A. Srinivasan Deformation Processing Maps for Control of Microstructure in Al-Cu-Mg Alloys Microalloyed with Sn 2012 Metallurgical and Materials Transactions A 43(-) 3834-3849
S. Ganguly, A. Garg, A. Pasricha and S. K. Dwivedy Control of pneumatic artificial muscle system through experimental Modelling 2012 Mechatronics 22(8) 1135-1147
S. Ghosh, A.K. Das, A.A. Vaidya, S.C. Mishra and P.K. Das Numerical study of dynamics of bubbles using lattice Boltzmann method 2012 Industrial & Engineering Chemistry Research 51(-) 6364-6376
S. Ghosh, P. Patil, S.C. Mishra, A.K. Das and P.K. Das 3-D lattice Boltzmann model for asymmetric Taylor bubble and Taylor drop in an inclined channel 2012 Engineering Applications of Computational Fluid Mechanics 6(-) 383-394
S. K. Dwivedy and B. Pratiher Reply to the "Comments on Parametric instability of a cantilever beam with magnetic field and periodic axial load 2012 Journal of Sound and Vibration 331(6) 1465-1466
S. K. Singh and R. Tiwari Detection and Localisation of Multiple Cracks in a Stepped Shaft. 2012 Fatigue and Fracture of Engineering Materials and Structures 36(-) 85-91
S. Kapuria, P. Kumari Boundary layer effects in Levy-type rectangular piezoelectric composite plates using a coupled efficient layerwise theory 2012 European Journal of Mechanics A 36(-) 1-19
S. Kapuria, P. Kumari Multi-term extended Kantorovich method for three dimensional elasticity solution of laminated plates 2012 Journal of Applied Mechanics (ASME) 79(6) 1-9
S. Khandekar,M. Ravi Sankar, V. Agnihotri, J. Ramkumar Nano cutting fluid for enhancement of meal cutting performance 2012 Materials and Manufacturing Processes 27(-) 963-967
S. Mahto and U.S. Dixit Comparative Dynamic Response of an Optimized Single Link Flexible manipulator 2012 Applied Mechanics and Materials 110-116(-) 4748-4756
S. S. Gautam, and P. M. Dixit Numerical Simulation of Ductile Fracture in Cylindrical Tube Impacted Against a Rigid Surface 2012 International Journal of Damage Mechanics 21(3) 341-371
S. S. Gautam, and R. K. Saxena A Numerical Study of Strain Rate and Temperature in Taylor Rod Impact Problem 2012 International Journal of Structural Changes in Solids 4(1) 1-11
S. Sarkar, S. Ganguly and G. Biswas, Mixed Convective Heat Transfer of Nanofluids Past a Circular Cylinder in Cross Flow in Unsteady Regime 2012 International Journal of Heat and Mass Transfer 55(-) 4783-4799
S.C. Mishra and H. Sahai Analyses of non-Fourier heat conduction in 1-D cylindrical and spherical geometry - an application of the lattice Boltzmann method 2012 International Journal of Heat and Mass Transfer 55(-) 7015-7023
S.C. Mishra and R.R. Vernekar Analysis of transport of collimated radiation in a participating media using the lattice Boltzmann method 2012 Journal of Quantitative Spectroscopy and Radiative Transfer 113(-) 2088-2099
S.C. Mishra, M.Y. Kim and S. Maruyama Performance evaluation of four radiative transfer methods in solving multi-dimensional radiation and/or conduction heat transfer problems 2012 International Journal of Heat and Mass Transfer 55(-) 5819-5835
S.C. Mishra, R. Muthukumaran,  S. Maruyama Comparison of the thermal effects of the transport of a short-pulse laser and a multi-pulse laser through a participating medium 2012 International Journal of Heat and Mass Transfer 55(-) 5583-5596
S.D. Kore, P.N. Vinod, S. Kumar, M. R. Kulkarni Study of Wavy Interface in Electromagnetic Welds 2012 Key Engineering Materials 504-506(-) 729-734
S.R. Deepak and G. Ananthasuresh Static balancing of a four-bar linkage and its cognates 2012 Mechanism and Machine Theory 48(-) 62-80
S.R. Deepak and G. K. Ananthasuresh Perfect static balance of linkages by addition of springs but not auxiliary bodies 2012 Journal of Mechanisms and Robotics 4(2) 1-12
S.S. Mohapatra, P. Mahanta Performance evaluation of quality drying in a natural convection grain dryer 2012 Applied Mechanics and Materials 110-116(-) 2094-2100
Sahoo BB, Saha UK, and Sahoo N Diagnosing the Effects of Pilot Fuel Quality on Exergy Terms in a Biogas Run Dual Fuel Diesel Engine 2012 International Journal of Exergy 10(1) 77-93
Sanjib Banerjee, P.S. Robi and A. Srinivasan Prediction of Hot Deformation Behavior of Al–5.9%Cu–0.5%Mg Alloys with Trace Additions of Sn 2012 Journal of Material Science 47(2) 929-948
Sanjib Banerjee1, P. S. Robi1, and A. Srinivasan Calorimetric study of precipitation kinetics of al–cu–mg and al–cu–mg–0.06 wt.% sn alloys 2012 Metals and Materials International 16(4) 523-531
Saptarshi Mandal, S Kanagaraj Reduction of emission in a diesel engine using nanofuel - Ceria nanoparticle dispersed diesel 2012 Journal of ASTM International, (ASTM Special Technical Publication) 1567(-) 79-91
Sarkar, S., Ganguly, S., Dalal, A. Analysis of Entropy Generation during Mixed Convective Heat Transfer of Nanofluids past a Square Cylinder in Parallel Flow 2012 ASME Journal of Heat Transfer 134(-) 1-8
Satya Sekhar B, Muthukumar P Performance Analysis of a Metal Hydride Based Heat Transformer 2012 Int Energy Journal 13(-) 29-44
Satyajit Panda and M. C. Ray Active damping of nonlinear vibrations of functionally graded laminated composite plates using vertically/obliquely reinforced 1-3 piezoelectric composite 2012 Journal of Vibration and Acoustics 134(2) 1-2
Sekhar BS, Muthukumar P, Saikia R Tests on a metal hydride based thermal energy storage system 2012 International Journal of Hydrogen Energy 37(-) 3818-3824
Sharma A., Ranavat V. S., Kulkarni V. N and Saha U. K. Numerical investigations on flow control over a blended wind body transonic aircraft 2012 Journal of Aircrafts 49(2) 532-545
Sharma AS, Rawat VS, Kulkarni VN, and Saha UK Numerical Investigations on Flow Control Over a Blended Wing Body Transonic Aircraft Using Synthetic Jet Actuator Arrays 2012 AIAA Journal of Aircraft 49(2) 532-545
Sura J., Menezes V., Kirthyvasan A. and Kulkarni V. N Estimation of skin friction drag on a model in hypersonic shock tunnel 2012 Applied Mechanics and Materials 232(-) 234-239
Susanta Kumar Dey, R. Ganesh Narayanan, G. Saravana Kumar Computing the tensile behavior of tailor welded blanks made of DP steel by neural network based expert system 2012 International Journal of Computer Integrated Manufacturing 25(2) 158-176
Susanta Kumar Dey, R. Ganesh Narayanan, G. Saravana  Kumar Prediction of tensile behavior of DP 590 Steel Tailor Welded Blanks by ANN 2012 Advanced Materials Research 383-390(-) 1019-1026
V. K. Jain, Ajay Sidpara, M. Ravi Sankar, Manas Das Nanofinishing Techniques: A Review, Proceedings of the Institution of Mechanical Engineers 2012 Part C: Journal of Mechanical Engineering Science 226(2) 327-346
V.K. Jain, Vinod Kumar,M. Ravi Sankar Experimental study and Empirical Modeling of Magnetic Abrasive Finishing on Ferromagnetic and Non-Ferromagnetic Materials 2012 International Journal of Precision Technology 3(1) 91-104

Authors Title Year Journal Volume (Issue) Pages
P. Bernard, S. Bag, K. Huang and R. Logé A two-site mean field model of discontinuous dynamic recrystallization 2011 Materials Science and Engineering A 528(24) 7357-7367
A. Banerjee, B. Bhattacharya, and A. K. Mallik Forward and inverse analyses of an SMA actuated complaint link 2011 Journal of Mechanisms and Robotics 3(-) 1-10
A. K. Parimi, P.S.Robi, S. K. Dwivedy Severe plastic deformation of copper and Al–Cu alloy using multiple channel-die compression 2011 Materials and Design 32(4) 1948-1956
A. Patra, D. Bandyopadhyay, G. Tomar, A. Sharma, and G. Biswas Instability and dewetting of ultrathin solid viscoelastic films on homogeneous and heterogeneous substrates 2011 The Journal of Chemical Physics 134(-) 064705-1-11
A.F. Di Rienzo, P. Asinari, R. Borchiellini and S.C. Mishra Improved angular discretization and error analysis of the lattice Boltzmann method for solving radiative heat transfer in a participating medium 2011 International Journal of Numerical Methods for Heat and Fluid Flow 21(5) 640-662
Abhishek T. Dhumal, R. Ganesh Narayanan, G. Saravana Kumar Simulation Based Expert System to Predict the Tensile Behaviour of Tailor Welded Blanks 2011 International Journal of Advanced Manufacturing Systems 13(1) 159-171
B. B. Sahoo, U. K. Saha, and N. Sahoo Theoretical performance limits for syngas-diesel fueled compression ignition engine from second law analysis 2011 Energy 36(2) 760-769
B. Nayak, S. K. Dwivedy and K.S.R.K Murthy Dynamic analysis of magnetorheological elastomer-based sandwich beam with conductive skins under various boundary conditions 2011 Journal of Sound and Vibration 330(-) 1837-1859
B. Parida, S. Pal, P. Biswas, M. M. Mohapatra and S. Tikader Mechanical and Micro-structural Study of Friction Stir Welding of Al-alloy 2011 International Journal of Applied Research In Mechanical Engineering 1(2) 69-74
B. Pratiher and S. K. Dwivedy Nonlinear response of a vertically moving viscoelastic beam subjected to a fluctuation contact load 2011 Acta Mechanica. 218(1-2.) 65-85
B. Pratiher and S. K. Dwivedy Nonlinear vibrations and frequency response analysis of a cantilever beam under periodically varying magnetic field 2011 Mechanics Based Design of Structures and Machines: An International Journal 39(3) 1539-1542
B.B. Sahoo, U. K. Saha and N. Sahoo Effect of load level on the performance of a dual fuel compression ignition engine operating on syngas fuels with varying H2/CO content 2011 Journal of Gas Turbine and Power, Transactions of ASME 133(12) 122802-1-12
Biswas Pankaj and Mandal N. R. A Study on Port Plug Distortion caused by Narrow Gap Combined GTAW & SMAW and Electron Beam Welding 2011 Journal of Fusion Engineering and Design 86(-) 99-105
Biswas Pankaj, and Mandal, N. R. Effect of Tool Geometries on Thermal History of FSW of AA1100 2011 Welding Journal 90(-) 129S-135S
Biswas Pankaj, D. Anil Kumar, Mandal N. R. and Mahapatra M. M. A Study on the Effect of Welding Sequence in Fabrication of Large Stiffened Plate Panels 2011 J. Marine. Sci. Appl. 10(-) 429-436
Biswas Pankaj, Mandal N. R. and Das S. Prediction of Welding Residual Stresses and Deformations of Large Stiffened Panels using Average Plastic Strain Method 2011 Journal of Science and Technology of Welding and Joining 16(3) 227-231
Biswas Pankaj, Mandal N. R., Sha O. P. and Mahapatra M. M. Thermo-mechanical and Experimental Analysis of Double Pass Line Heating 2011 J. Marine Sci. Appl 10(-) 190-198
Biswas Pankaj, Sujoy Tikader, Rajesh Ranjan and Mandal N. R. Effect of welding tacks and sequences on residual stress in stiffened panel fabrication 2011 Journal of Ocean and Ship Technology 2(2) 99-113
C. Subramanian and S. Senthilvelan Short-term Flexural Creep Behavior and Model Analysis of a Glass-fiber-reinforced Thermoplastic Composite Leaf spring 2011 Journal of Applied Polymer Science 120(6) 3689-3686
C. Subramanian, Sunil Balwant Deshpande and S. Senthilvelan Effect of Reinforced Fiber Length on Damping Performance of Thermoplastic Composites 2011 Advanced Composite Materials 20(4) 319-335
D. A. Perumal, A. K. Dass Multiplicity of Steady Solutions in Two-Dimensional Lid-Driven Cavity Flows by the Lattice Boltzmann Method 2011 Computers & Mathematics with Applications 61(12) 3711-3721
D. Chatterjee and G. Biswas The Effects of Reynolds and Prandtl Numbers on Flow and Heat Transfer Across Tandem Square Cylinders in the Steady Flow Regime 2011 Numerical Heat Transfer, Part A 59(-) 421-437
D. Sharma, K. Deb, N. N. Kishore Domain-Specific Initial Population Strategy for Compliant Mechanisms Using Customized Genetic Algorithm 2011 Structural and Multidisciplinary Optimization 43(4) 541-554
Eswaran M, Singh A, and Saha UK Experimental Investigation of Liquid Free Surface Behaviour in an Excited Tank, Proc. of the IMechE 2011 Part–M: Journal of Engineering for the Maritime Environment 225(-) 133-148
Fonseca A, Inacio N, Kanagaraj S, Oliveira MSA, Simoes JAO The use of Taguchi technique to optimize the compression moulding cycle to process acetabular cup components 2011 Journal of Nanoscience and Nanotechnology 11(-) 5334-5339
Fonseca A, Kanagaraj S, Oliveira MSA, Simoes JAO Enhanced UHMWPE reinforced with MWCNT through mechanical ball-milling 2011 Defect and Diffusion Forum 312-315(-) 1238-1243
Ganesh, N. and Sotiropoulos, F. IDeC(k): A new velocity reconstruction algorithm on arbitrarily polygonal staggered meshes 2011 Journal of Computational Physics 230(17) 6583-6604
H. Gadgil, A. Dolatabadi, B. N. Raghunandan Mass distribution studies in effervescent sprays 2011 Atomization and Sprays 21(5) 375-390
Hrishikesh P. Gadgil, B. N. Raghunandan Some features of spray breakup in effervescent atomizers 2011 Experiments in Fluids 50(2) 329-338
Hrishikesh P. Gadgil, B. N. Raghunandan Effect of air injection configuration on the characteristics of effervescent sprays 2011 AIAA Journal of Propulsion and Power 27(4) 925-928
Hrishikesh P. Gadgil, B. N. Raghunandan Model for predicting the mean drop size in effervescent sprays 2011 AIAA Journal of Propulsion and Power 27(5) 937-943
I. Chakraborty, G. Biswas, and P. S. Ghoshdastidar Bubble generation in quiescent and co-flowing liquids 2011 International Journal of Heat and Mass Transfer 54(-) 4673-4688
J. C. Kalita and A. K. Dass Higher Order Compact Simulation of Double-Diffusive Natural Convection in a Vertical Porous Annulus 2011 Engineering Applications of Computational Fluid Mechanics 5(-) 357-371
J. Sardar, D. Bandopadhya Processing, Fabrication and Investigation of Thermal Characteristics of Portland Pozzolanic Cement Filled Polypropylene Composites 2011 International Journal of Plastic and Polymer Technology 1(1) 16-37
Joshi S. N. and Pande S. S. Intelligent process modeling and optimization of die-sinking electric discharge machining 2011 Applied Soft Computing 11(2) 2743-2755
Kanagaraj S, Fonseca A, Guedes RM, Oliveira MSA, Simoes JAO Thermo-mechanical behaviour of ultrahigh molecular weight polyethylene-carbon nanotubes composites under different cooling techniques 2011 Defect and Diffusion Forum 312-315(-) 331-340
Khoo W. K. S., Kalita K., and Garvey S. D. Practical Implementation of the Bridge Configured Winding for Producing Controllable Transverse Forces in Electrical Machines 2011 IEEE Transactions on Magnetics 47(6) 1712-1718
Lamas BC, Fonseca MAL, Goncalves FAMM, Ferreira AGM, Fonseca IMA, Kanagaraj S, Martins N, Oliveira MSA EG/CNTs nanofluids engineering and thermal characterization 2011 Journal of Nano Research 13(-) 69-74
M. Chandrasekaran, M. Muralidhar and U.S. Dixit An interactive online finish milling process optimization 2011 International Journal of Applied Engineering Research 6(5) 949-959
M. Hazarika, S. Deb, U.S. Dixit and J.P. Davim Fuzzy set based setup planning system with ability for online learning 2011 Proc. IMechE, Part B: J. Engineering Manufacture 225(2) 247-263
M. Ravi Sankar, J. Ramkumar, S Aravindan Machining of Metal Matrix Composites with Minimum Quantity Cutting Fluid and Flood Cooling 2011 Advanced Materials Research 299-300(-) 1052-1055
M. Ravi Sankar, V. K. Jain, J. Ramkumar, Y. M. Joshi Rheological Characterization of Styrene-Butadiene based medium and its Finishing Performance using Rotational Abrasive Flow Finishing Process 2011 International Journal of Machine tools and Manufacture 51(12) 947-957
M.Baruah, A.Dewan, P. Mahanta Performance of elliptical pin fin heat exchanger with three elliptical perforations 2011 CFD Letters 3(2) 65-73
Manas Das, V.K. Jain, P.S Ghoshdastidar Investigations into out-of-roundness of internal surfaces of stainless steel tubes finished by R-MRAFF Process 2011 Journal of Materials and Manufacturing Processes 26(-) 1073-1084
Monikankana Sharma, Subhash C. Mishra,& P. Mahanta An experimental investigation on efficiency improvement of a conventional kerosene pressure stove 2011 International Journal of Energy for a Clean Environment 12(1) 79-93
Muthukumar P, Anand P, Sachdeva P Performance analysis of porous radiant burners used in LPG cooking stove 2011 Int. J. Energy and Environment 2(-) 367-374
N. Sahoo and R. K. Peetala Transient temperature data analysis for a supersonic flight test 2011 ASME Journal of Heat Transfer 132(-) 31-5
N. Sahoo and R. K. Peetala Transient surface heating rates from a nickel film sensor using inverse analysis 2011 International Journal of Heat and Mass Transfer 54(-) 1297-1302
P. Janaki Ramulu, R. Ganesh Narayanan Weld zone representation during the formability prediction of friction stir welded blanks with similar thickness sheets 2011 Journal of Strain Analysis for Engineering Design 46(6) 456-477
P. K. Barua, D. Deka, U.S. Dixit Mathematical Modelling of Change of Temperature in Pulsating Heat Pipes with Single Loops 2011 International Journal of Energy, Information and Communications 2(-) 33-52
P. K. Mishra, A. K. De, M. K. Verma and V. Eswaran Dynamics of reorientations of large-scale flow in Rayleigh-Benard convection 2011 J. Fluid Mech. 668(-) 480-499
P. Kumari, S. Kapuria Boundary layer effects in rectangular cross-ply Levy-type plates using zigzag theory 2011 ZAMM-Zeitschrift Fur Angewandte Mathematik Und Mechanik 91(7) 565-580
R. Das, S.C. Mishra, T.B.P Kumar and R. Uppaluri An inverse analysis for parameter estimation applied to a non-Fourier conduction-radiation problem 2011 Heat Transfer Engineering 32(-) 455-466
R. Das, U.S. Dixit and S. Deb Effect of die land length and lubrication on the mechanical properties of the extruded products in a multi-hole extrusion process: an experimental study 2011 International Journal of Manufacturing Technology and Industrial Engineering 1(2) 175-179
R. Ganesh Narayanan, K. Veerababu, K. Siva Krishna, G. Saravanakumar Determining the forming behavior of tailor welded blanks Expert systems predict results 2011 Stamping Journal 1(-) 14-17
R. Kumar, N. Sahoo, V. Kulkarni and A. Singh Laser based calibration technique of thin film gauges for short duration transient measurement 2011 Journal of Thermal Science and Engineering Applications: Transactions of ASME 3(4) 504-509
R. Muthukumaran, S.C. Mishra, S. Maruyama and K. Mitra Assessment of signals from a tissue phantom subjected to radiation sources of temporal spans of the order of a nano-, a pico- and a femto-second – a numerical study 2011 Numerical Heat Transfer, Part A 60(-) 154-170
R. P. Chopade, S.C. Mishra, P. Mahanta, S. Maruyama Effects of locations of a 3-D design object in a 3-D radiant furnace for prescribed uniform thermal conditions 2011 Applied Thermal Engineering 31(16) 3262-3274
R. S. Patil, M. Pandey and P. Mahanta Parametric Studies and Effect of Scale-up on Wall-to-Bed Heat Transfer Characteristics of Circulating Fluidized Bed Risers 2011 Experimental Thermal and Fluid Science 35(3) 485-494
R.P Chopade, E. Agnihotri, A.K.Singh, A.Kumar, R.Uppaluri, S.C Mishra, P.Mahanta Application of a particle swarm algorithm for parameter retrieval in a transient conduction-radiation problem 2011 Numerical Heat Transfer Part A: Applications(59) 9-672
R.P Chopade, S.C Mishra, P. Mahanta, S. Maruyama Numerical analysis of an inverseboundary design problem of a 3-D radiant furnace with a 3-D design object 2011 Numerical Heat Transfer Part A: Applications (60) 1-25
R.P. Chopade, E. Agnihotri, A.K. Singh, A. Kumar, R. Uppaluri, S.C. Mishra and P. Mahanta Application of particle swarm algorithm for parameter retrieval in a transient conduction-radiation problem 2011 Numerical Heat Transfer, Part A 59(-) 672-692
R.P. Chopade, S.C. Mishra, P. Mahanta and S. Maruyama Numerical analysis of an inverse boundary design problem of 3-D radiant furnace with a 3-D design object 2011 Numerical Heat Transfer, Part A 60(-) 25-49
Rakesh K., Sahoo N., Kulkarni V. N and Singh A. Laser based calibration technique of thin film gauges for short duration transient measurements 2011 Journal of Thermal Science and Engineering Applications 3(-) 044504-1-6
Rama Sreekanth P.S, Kanagaraj S UHMWPE for total joint replacements: A review on trends and developments 2011 Journal of North East Regional Orthopaedic Surgeons’ Association 7(-) 87-99
S. Bag A perspective review on laser assisted microjoining 2011 Recent Patents on Mechanical Engineering 4(2) 153-167
S. D. Kore, P. P. Date, S.V. Kulkarni, Satendra Kumar, Dolly Rani, M. R. Kulkarni, S.V. Desai, R.K. Rajawat, K.V. Nagesh, and D.P. Chakravarty Application of Electromagnetic Impact Technique for Welding Copper-to-Stainless Steel Sheets 2011 International Journal of Advanced Manufacturing Technology 54(-) 949-955
S. K. Laha and S. K. Kakoty Non-linear dynamic analysis of a flexible rotor supported on porous oil journal bearing 2011 Communications in Nonlinear Science and Numerical Simulation 16(3) 1616-1631
S. Kapuria, P. Kumari Extended Kantorovich method for three dimensional elasticity solution of laminated composite structures 2011 Journal of Applied Mechanics (ASME) 78(-) 1-8
S. Kapuria, P. Kumari Three-dimensional iso-field micromechanics for effective electrothermoelastic properties of piezoelectric composites 2011 Journal of Mechanics of Materials and Structures 6(-) 249-265
S. S. Gautam, R. Babu, and P. M. Dixit Ductile Fracture Simulation in the Taylor Rod Impact Test using Continuum Damage Mechanics 2011 International Journal of Damage Mechanics 20(3) 347-369
S. Sarkar, A. Dalal and G. Biswas, Unsteady wake dynamics and heat transfer in forced and mixed convection past a circular cylinder in cross flow for high Prandtl numbers 2011 International Journal of Heat and Mass Transfer 54(15-16) 3536-3551
S. Sen, S. Mittal, and G. Biswas Flow past a Square Cylinder at Low Reynolds Numbers 2011 International Journal for Numerical Methods in Fluids 67(-) 1160-1174
S.C. Mishra and A. Stephen Combined mode conduction and radiation heat transfer in a spherical geometry with non-Fourier Effect 2011 International Journal of Heat and Mass Transfer 54(-) 2975-2989
S.C. Mishra and Ch. Hari Krishna Analysis of radiative transport in a cylindrical enclosure - an application of the modified discrete ordinate method 2011 Journal of Quantitative Spectroscopy and Radiative Transfer 112(-) 1065-1081
S.C. Mishra, Ch. Hari Krishna and M.Y. Kim Analysis of conduction and radiation heat transfer in a 2-D cylindrical medium using the modified discrete ordinate method and the lattice Boltzmann method 2011 Numerical Heat Transfer, Part A 60(-) 254-287
S.C. Mishra, R. Muthukumaran and S. Maruyama The finite volume method approach to the collapsed dimension method in analyzing steady/transient radiative transfer problems in participating media 2011 International Communication in Heat and Mass Transfer 28(3) 291-297
Sahoo BB, Saha UK, and Sahoo N Theoretical Performance Limits for a Syngas–Diesel Fueled Compression Ignition Engine from Second Law Analysis 2011 Energy 36(-) 760-769
Sahoo BB, Sahoo N, and Saha UK Dual Fuel Performance Studies of a Small Diesel Engine Using Green Fuels 2011 Applied Mechanics and Materials 110-116(-) 2101-2108
Satyajit Panda Nonlinear analysis of smart annular plates using cylindrically orthotropic piezoelectric fiber-reinforced composite 2011 Journal of Intelligent Material Systems and Structures 22(-) 1789-1801
Siddharth Mehta, K. Prashanth Chauhan, S. Kanagaraj Modeling of thermal conductivity of nanofluids by modifying Maxwells equation using cell model approach 2011 Journal of Nanoparticle Research 13(-) 2791-2798
Sukhomay Pal, P. Stephan Heyns, Burkhard H. Freyer, Nico J. Theron and Surjya K. Pal Tool wear monitoring and selection of optimum cutting conditions with progressive tool wear effect and input uncertainties 2011 Journal of Intelligent Manufacturing 22(-) 491-504
U.S. Dixit, S.N. Joshi, J.P. Davim Incorporation of material behavior in modeling of metal forming and machining processes: A review 2011 Materials & Design 32(7) 3655-3670
V. Kulkarni, N. Sahoo and S. D. Chavan Simulation of honeycomb-screen combinations for turbulence management in a subsonic wind tunnel 2011 Journal of Wind Engineering and Industrial Aerodynamics 99(1) 37-45
V.K. Pantangi, S.C. Mishra, P. Muthukumar and R. Reddy Studies on porous radiant burners for LPG cooking applications 2011 Energy 36(-) 6074-6080

Authors Title Year Journal Volume (Issue) Pages
A Sakurai, S.C. Mishra and S. Maryuama Radiation element method coupled with the lattice Boltzmann method applied to the analysis of a  transient conduction and radiation heat transfer problem with heat generation in a participating medium 2010 Numerical Heat Transfer, Part A 57(-) 346-368
M. Chandrasekaran, M. Muralidhar, C. Murali Krishna and U.S. Dixit Application of soft computing techniques in machining performance prediction and optimization: a literature review 2010 Int. J. Advanced Manufacturing Technology 46(5-8.) 445-464
A. Dewan, P. Patro, I. Khan, P. Mahanta The effect of fin spacing and material on the performance of a heat sink with circular pin fins 2010 Part A: Journal of Power and Energy 224(1) 35-46
A. Banerjee, B. Bhattacharya, and A. K. Mallik Optimum discrete location of a shape memory alloy wire for discrete actuation of a compliant link 2010 ASME Journal of Mechanical Design 132(-) 1-7
A. N. Reddy, N. Maheshwari, D. K. Sahu and G. K. Ananthasuresh Miniature compliant grippers with vision-based force sensing 2010 IEEE Transactions on Robotics 26(5) 867-877
B. Buragohain, P. Mahanta, V.S. Moholkar Biomass gasification for decentralized power generation: The Indian perspective 2010 Renewable and Sustainable Energy Reviews 14(1) 73-92
B. Buragohain, P. Mahanta, V.S. Moholkar Thermodynamic optimization of biomass gasification for decentralized power generation and Fischer-Tropsch synthesis 2010 Energy 35(6) 2557-2579
B. Kawale and N. Sahoo Heat transfer data analysis from thin film heat transfer gauge 2010 Journal of the Institute of Engineers (India) 91(-) 14-18
B. Kawale, R. K. Peetala, N. Sahoo and V. Kulkarni Numerical methods to determine convecting heating rates on aerodynamic surfaces 2010 International Journal of Hypersonics 1(1) 1-12
B. Pratiher and S. K. Dwivedy Nonlinear response of a soft magneto elastic cantilever beam with end mass under static and dynamics magnetic field 2010 Journal of Vibration and Control 17(9) 1394-1406
B. Ray, G. Biswas and A. Sharma Generation of secondary droplets in coalescence of a drop at a liquid/ liquid interface 2010 Journal of Fluid Mechanics 655(-) 72-104
B. Srinivas Naik, P. Janaki Ramulu, R. Ganesh Narayanan Application of few necking criteria in predicting the forming limit of un-welded and tailor welded blanks 2010 Journal of Strain Analysis for Engineering Design 45(2) 79-96
Biswas Pankaj and Mandal N. R. Analysis of Welding Distortion due to Narrow Gap welding of Upper Port Plug 2010 Fusion Engineering and Design 85(-) 780-788
C. Kim, M.Y. Kim, M.J. Yu and S.C. Mishra Unstructured polygonal finite volume solutions of radiative heat transfer  in a complex axisymmetric enclosure 2010 Numerical Heat Transfer, Part B 57(3) 227-239
C. Subramanian and S. Senthilvelan Fatigue Performance of Discontinuous Fiber Reinforced Thermoplastic Leaf spring 2010 Journal of Materials: Design and Applications, Proc. of Ins. Mech. E Part L 224(3) 93-100
C. Subramanian and S. Senthilvelan Abrasive Behavior of Discontinuous Fiber Reinforced Polypropylene Material 2010 Industrial Lubrication and Tribology 62(4) 187-196
C. Subramanian and S. Senthilvelan Joint Performance of Glass Fiber Reinforced Polypropylene Leaf spring 2010 Composite Structures 93(2) 759-766
C. Subramanian and S.Senthilvelan Effect of Reinforced Fiber Length on the Joint Performance of Thermoplastic Leaf spring 2010 Materials and Design 31(-) 3733-3741
D. A. Perumal, A. K. Dass Simulation of Incompressible Flows in Two-Sided Lid-Driven Square Cavities. Part I-FDM 2010 CFD Letters 2(-) 13-24
D. A. Perumal, A. K. Dass Simulation of Incompressible Flows in Two-Sided Lid-Driven Square Cavities. Part II-LBM 2010 CFD Letters 2(-) 25-38
D. A. Perumal, G. V. S. Kumar, A. K. Dass Application of Lattice Boltzmann Method to Flows in Microgeometries 2010 CFD letters 2(-) 75-84
D. Bandopadhya Derivation of Transfer Function of an IPMC Actuator Based on Pseudo-Rigid Body Model 2010 International Journal of Reinforced Plastics and composites 29(3) 372-390
D. Bandopadhya and J. Njuguna Comparative Performance Studies of Active Vibration Control by IPMC with Kalman Estimation Algorithm 2010 IEEE Transaction on Control 18(-) 1-2
D. Chatterjee, G. Biswas and S. Amiroudine Numerical simulation of flow past row of square cylinders for various separation ratios 2010 Computers and Fluids 39(-) 49-59
D. K. Biswal, D. Bandopadhya , and S. K. Dwivedy Evaluation of dehydration loss and investigation of its effect on bending response of segmented IPMC actuators 2010 International Journal of Smart and Nano Materials 110-116(3) 187-200
D. S. Kumar, A. K. Dass and A. Dewan A Multigrid-Accelerated Code on Graded Cartesian Meshes for 2D Time-Dependent Incompressible Viscous Flows 2010 Engineering Applications of Computational Fluid Mechanics 4(-) 71-90
D. S. Kumar, A. K. Dass and A. Dewan A multigrid-accelerated three-dimensional transient-flow code and its application to a new test problem 2010 Journal of Hydrodynamics 22(6) 838-846
D.K. Sarma and U.S. Dixit Neural network modelling of forces and indirect prediction of tool wear in turning of grey cast iron with ceramic tool 2010 International Journal of Machining and Machinability of Materials 8(1) 55-75
Durga Prasad, G.V., Pandey, M. Parametric effects on reactivity instabilities and nonlinear oscillations in a nuclear-coupled double channel natural circulation boiling system 2010 Nuclear Engineering and Design 240(5) 1097-1110
G. Gandikota, S. Amiroudine, D. Chatterjee and G. Biswas The Effect of Aiding/ Opposing Buoyancy on Two-Dimensional Laminar Flow Across a Circular Cylinder 2010 Numerical Heat Transfer, Part A 58(-) 385-402
Garg, S., Patra, K., Khetrapal, V., Pal, S. K. and Chakraborty, D. Genetically evolved radial basis function network based prediction of drill flank wear 2010 Engineering Applications of Artificial Intelligence 23(-) 1112-1120
H. Sarangi, K.S.R.K. Murthy and D. Chakraborty Radial locations of strain gages for accurate measurement of mode I stress intensity factor 2010 Materials and Design 31(-) 2840-2850
H. Sarangi, K.S.R.K. Murthy and D. Chakraborty Optimum strain gage location for evaluating stress intensity factors in single and double ended cracked configurations 2010 Engineering Fracture Mechanics 77(-) 3190-3203
Joshi S. N. and Pande S. S. Thermo-physical modeling of die-sinking EDM process 2010 Journal of Manufacturing Processes 12(1) 45-56
K. Siva Krishna, R. Ganesh Narayanan, G. Saravanakumar Tailor welded blank forming limit computation by neural network based expert system 2010 International Journal: Computer and Experimental Simulations in Engineering and Science 1(8) 16-44
K. Veerababu, R. Ganesh Narayanan, G. Saravanakumar An expert system for predicting the deep drawing behavior of tailor welded blanks 2010 Expert system with applications 37(12) 7802-7812
K.S.R.K. Murthy and M. Mukhopadhyay Adaptive finite element analysis of mixed-mode crack problems with automatic mesh generator 2010 Journal for Numerical Methods in Engineering 49(-) 1087-1100
Kalita K, Khoo W. K. S., Garvey S. D., Hill-Cottingham R. J., Rodger D. and Eastham J. F. Passive Contra-Magnetised Parallel-Airgap Serial Flux Magnetic Bearings 2010 Journal of Mechanical Engineering Science 224(11) 2515-2524
Kanagaraj S, Mathew M.T, Fonseca A, Oliveira M.S.A, Simoes J.A.O, Rocha L.A Tribological characterization of carbon nanotubes/ultrahigh molecular weight polyethylene composites: the effects of sliding distance 2010 International Journal of Surface Science and Engineering 4(-) 305-321
Khoo W. K. S., Kalita K, Garvey S. D., Hill-Cottingham R. J., Rodger D. and Eastham J. F. Active Axial-MMF Parallel-Airgap Serial Flux Magnetic Bearings 2010 IEEE Transactions on Magnetics 46(7) 2596-2602
Kulkarni V. N and Reddy K.P.J Counterflow drag reduction studies for a blunt cone in high enthalpy flow 2010 International Journal of Hypersonics 1(1) 69-76
Kulkarni V. N and Reddy K.P.J Accelerometer based force balance for high enthalpy facilities 2010 Journal of Aerospace Engineering 23(4) 276-280
Kulkarni V. N, Menezes V. and Reddy K.P.J Effectiveness of forward facing spike for drag reduction on a large angle blunt cone in hypersonic flow 2010 Journal of Spacecraft and Rockets 43(3) 542-544
Lakshmanan, S.P., Pandey, M. Numerical investigations on power ramping procedure for a natural circulation boiling water reactor 2010 Nuclear Engineering and Design 240(4) 860-867
Lakshmanan, S.P., Pandey, M. Numerical investigation of startup instabilities in parallel-channel natural circulation boiling systems 2010 Science and Technology of Nuclear Installations 2010(-) 1-8
M. Ajith, R. Das, R. Uppaluri and S.C. Mishra Boundary heat fluxes in a square enclosure with an embedded design element 2010 Journal of Thermophysics and Heat Transfer 24(4) 845-849
M. Baruah, A. Dewanand P. Mahanta Comparison of straight, perforated and tapered elliptical pin fin compact heat exchangers 2010 IUP Journal of Mechanical Engineering 3(4) 7-27
M. Hazarika, U.S. Dixit and S. Deb A setup planning methodology for prismatic parts considering fixturing aspects 2010 International Journal of Advanced Manufacturing 51(9-12.) 1099-1109
M. Hazarika, U.S. Dixit and S. Deb Effect of Datum Surface Roughness on Parallelism and Perpendicularity Tolerances in Milling of Prismatic Parts 2010 Proc. IMechE, Part B: J. Engineering Manufacture 224(B9) 1377-1388
M. Karthikeyan, and R. Tiwari Detection, localization, and sizing of a structural flaw in a beam based on forced response measurements- An experimental investigation. 2010 Mechanism and Machine Theory 45(4) 584-600
M. Ravi Sankar, V. K. Jain, J. Ramkumar, Kamal K. Kar Rheological characterization and performance evaluation of a new medium developed for abrasive flow finishing 2010 International Journal of Precision Technology 1(3-4.) 302-313
Mamilla Ravi Sankar, V.K. Jain and J. Ramkumar Experimental investigations into rotating workpiece Abrasive flow finishing 2010 Wear 267(1-4.) 43-51
Mamilla Ravi Sankar, V.K. Jain and J. Ramkumar Rotational abrasive flow finishing (R-AFF) process and its effects on finished surface topography 2010 International journal of machine tools and Manufacture 50(7) 637-650
Manas Das, Ajay Sidpara, V.K. Jain, P.S. Ghoshdastidar Parametric analysis of MR polishing fluid using statistical technique 2010 International Journal of Precision Technology 2(1) 51-63
Manas Das, V.K. Jain, P.S Ghoshdastidar Nano-finishing of stainless-steel tubes using R-MRAFF Process 2010 Machining Science and Technology an International Journal 14(3) 365-389
Muthukumar P, Groll M Erratum to Metal hydride based heating and cooling systems: A review 2010 International Journal of Hydrogen Energy 35(-) 3817-3831
Muthukumar P, Ramana SV Heat and mass transfer studies in metal hydride reactor during desorption of hydrogen 2010 Internation Journal of Hydrogen Energy 35(-) 811-818
N. Sahoo and K.P.J. Reddy Force measurement techniques for hypersonic flows in shock tunnel 2010 International Journal of Hypersonics 1(1) 31-57
P. Asinari, S.C. Mishra and R. Borchiellini A lattice Boltzmann formulation to the analysis of radiative heat transfer problems in a participating medium 2010 Numerical Heat Transfer, Part B 57(2) 126-146
P. K. Barua, D. Deka, U.S. Dixit Mathematical modeling of change of temperature in a pulsating heat pipe with multiple turns 2010 International Journal of Energy, Information and Communications 1(-) 94-107
P. Mahanta, R. S. Patil, and M. Pandey Effect of particle size and sand inventory on wall-to-bed heat transfer characteristics of circulating fluidized bed riser 2010 World Congress on Engineering 2(-) 1495-1500
P. Saha and G. Biswas Assessment of a Shear-Improved Subgrid Stress Closure for Turbulent Channel Flows 2010 International Journal of Heat and Mass Transfer 53(-) 4856-4863
P.V. Jogdand and K.S.R.K. Murthy A finite element based interior collocation method for the computation of stress intensity factors and T-stresses 2010 Engineering Fracture Mechanics 77(-) 1116-1127
Patil, R.S., Pandey, M., Mahanta, P. Effect of scale-up on heat transfer characteristics in upper splash region of circulating fluidized bed risers 2010 Journal of Energy and Power Engineering (David) 4(6) 1-7
Ponmozhi J, Goncalves FAMM, Ferreira AGM, Fonseca IMA, Kanagaraj S, Martins N, Oliveira MSA Thermodynamic and transport properties of CNT- water based nanofluids 2010 Journal of Nano Research 11(-) 101-106
R. Das, S.C. Mishra and R. Uppaluri Inverse analysis applied to retrieval of parameters and reconstruction of temperature field in a transient conduction-radiation heat transfer problem involving mixed boundary conditions 2010 Int. Communications in Heat and Mass Transfer 37(1) 52-57
R. S. Patil, M. Pandey, P. Mahanta Effect of Scale-up on Heat Transfer Characteristics in Upper Splash Region of Circulating Fluidized Bed Risers 2010 Journal of Energy and Power Engineering 4(6) 9-15
R. K. Saxena, S. S. Gautam, and P. M. Dixit Numerical Simulation of Fracture in Cup Drawing 2010 International Journal of Material Forming 3(1) 117-120
R. S. Patil, M. Pandey and P. Mahanta Effect of scale-up of lower and middle splash region on heat transfer characteristics of circulating fluidized bed risers 2010 Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 224(8) 1059-1068
R. S. Patil, P. Mahantaand M. Pandey Effect of scale-up on heat transfer characteristics of cyclone separators of circulating fluidized beds 2010 International Energy Journal 11(3) 123-130
R.N.Mehta, M. Chakraborty, P. Mahanta, P.A. Parikh Evaluation of fuel properties of butanol-biodiesel-diesel blends and their impact on engine performance and emissions 2010 Industrial and Engineering Chemistry Research 49(16) 7660-7665
Reis J, Kanagaraj S, Fonseca A, Mathew MT, Silva FC, Potes J, Oliveira MSA, Simoes JAO In vitro studies on multiwalled carbon nanotubes/ultrahigh molecular weight polyethylene nano composites 2010 Brazilian Journal of Medical and Biological Research 43(-) 476-482
Roy T., Manikandan, P., and Chakraborty D. Improved shell finite element for piezothermoelastic analysis of smart fiber reinforced composite structures 2010 Finite Elements in Analysis and Design 46(-) 710-720
S. Bag and A. De Error analysis of forward and reverse heat conduction and convection calculations considering uncertainties in welding 2010 Science and Technology of Welding and Joining 14(9) 662-668
S. Bag and A. De Probing reliability of transport phenomena based heat transfer and fluid flow analysis in autogeneous fusion welding process 2010 Metallurgical and Materials Transactions A 41A(9) 2337-2347
S. D. Kore, P. P. Date, S.V. Kulkarni, Satendra Kumar, Dolly Rani, M. R. Kulkarni, S.V. Desai, R.K. Rajawat, K.V. Nagesh, and D.P. Chakravarty Electromagnetic impact welding of Cu to Cu sheets 2010 International Journal of Material Forming 3(-) 117-121
S. Jayavel, S. Tiwari, G. Biswas and M. Sen Kinematics of a fluid particle due to interaction of fixed inviscid vortex filaments in presence of external translation and pulsation 2010 International Journal of Fluid Mechanics Research 37(-) 127-148
S. K. Dwivedy, Srinivasulu. M, K. Sathis Narayan and A. Koushik Dynamic analysis of composite flexible robotic manipulator with harmonic drives using finite element method 2010 Advances in Vibration Engineering 8(3-4.) 313-320
S. K. Singh, and R. Tiwari Identification of a Multi-Crack in a Shaft System using Transverse Frequency Response Functions. 2010 Mechanism and Machine Theory 45(-) 1813-1827
S. Kapuria, P. Kumari, J. K. Nath Efficient modeling of smart piezoelectric composite laminates-A review 2010 Acta Mechanica 214(-) 31-48
S. Kapuria, P. Kumari Three-dimensional piezoelasticity solution for dynamics of cross-ply cylindrical shells integrated with piezoelectric fiber reinforced composite actuators and sensors 2010 Composite Structures 92(10) 2431-2444
S. S. Gautam, and P. M. Dixit Ductile Failure Simulation in Spherodized Steel using a Continuum Damage Mechanics Coupled Finite Element Formulation 2010 International Journal of Computational Methods 7(2) 319-348
S. Sarkar, A. Dalal and G. Biswas Mixed Convective Heat Transfer from Two Identical Square Cylinders in Cross Flow at Re=100 2010 International Journal of Heat and Mass Transfer 53(-) 2628-2642
S.C. Mishra, A. Stephen and M.Y. Kim Analysis of non-Fourier conduction-radiation heat transfer in a cylindrical enclosure 2010 Numerical Heat Transfer, Part A 58(12) 943-962
S.C. Mishra, Ch. Hari Krishna and M.Y. Kim Lattice Boltzmann method and modified discrete ordinate method applied to radiative transport in a spherical medium with and without conduction 2010 Numerical Heat Transfer, Part A 58(11) 852-881
S.D. Kore, J. Imbert, M.J. Worswick, Y. Zhou Electromagnetic Impact Welding of Mg to Al Sheets 2010 Science and Technology Welding and Joining 14(6) 549-553
S.D. Kore, P.P. Date, S.V. Kulkarni Numerical modeling of electromagnetic welding 2010 International Journal for Applied Electromagnetics and Mechanics 32(1) 1-19
S.K. Dwivedy, M. Srinivas Dynamic instability of MRE embedded soft cored sandwich beam with nonconductive skins 2010 Shock and Vibration 18(6) 759-788
S.K. Dwivedy, N. Mahendra, K.C.Sahu Parametric instability of a soft and magneto rheological elastomer cored sandwich beam 2010 Journal of Sound and Vibration 325(4-5.) 686-704
Samir K.Ghosh, Sukhomay Pal, Sujit K. Roy, Surjya K. Pal and Debabrata Basu Modelling of the flame temperature of solution combination synthesis of a bio-ceramic material and its parametric optimization 2010 Bulletin of Materials Science, Springer 33(4) 339-350
Sanjib Banerjee, P.S. Robi, A. Srinivasan, Lakavath Praveen Kumar High temperature deformation behavior of Al–Cu–Mg alloys micro-alloyed with Sn 2010 Material Science and Engineering 527(-) 2498-2503
Sanjib Banerjee, P.S. Robi, A. Srinivasan, Praveen Kumar Lakavath Effect of trace additions of Sn on microstructure and mechanical properties of Al–Cu–Mg alloys 2010 Materials & Design 31(8) 4007-4015
Satheesh A, Muthukumar P Performance investigations of a single-stage metal hydride heat pump 2010 Internation Journal of Hydrogen Energy 35(-) 50-58
Satheesh A, Muthukumar P Simulation of double-stage double-effect metal hydride heat pump 2010 Internation Journal of Hydrogen Energy 35(-) 1474-1484
Satheesh A, Muthukumar P Performance investigation of a double-stage double-effect metal hydride heat pump 2010 Applied Thermal Engineering 30(17-18) 2698-2707
Sukhomay Pal, Surjya K. Pal and Arun K. Samantaray Prediction of the quality of pulsed metal inert gas welding using statistical parameters of arc signals in artificial neural network 2010 International Journal of Computer Integrated Manufacturing 23(-) 453-465
Sukhomay Pal, Surjya K. Pal and Arun K. Samantaray Determination of optimal pulse metal inert gas welding parameters with a Neuro-GA technique 2010 Materials and Manufacturing Processes 25(-) 606-615

Authors Title Year Journal Volume (Issue) Pages
Mondal and S.C. Mishra Analysis of 3-D conductive-radiative transfer  using LBM and FVM on non-uniform lattices 2009 Journal of Thermophysics and Heat Transfer 23(1) 210-216
A. Kohli and U.S. Dixit A neural network based methodology for prediction of surface roughness in turning process 2005 Int. J. Adv. Manuf. Tech. 25(1-2.) 118-129
A. Banerjee, B. Bhattacharya, and A. K. Mallik Forward and inverse analyses of smart compliant mechanism for path generation 2009 Mechanism and Machine Theory 44(-) 369-381
A. P. Singh, A. K. De, V. K. Carpenter, V. Eswaran and K. Muralidhar Flow past a transversely oscillating square cylinder in free stream 2009 International Journal for Numerical Methods in Fluids 61(6) 658-682
Ajay Sidpara, Manas Das, V.K. Jain Rheological Characterization of Magnetorheological finishing Fluid 2009 Journal of Materials and Manufacturing Processes 24(12) 1467-1478
Anil, N. and Chakraborty, D. Effective properties of Thermo-Electro-Mechanically Coupled Piezoelectric Fiber Reinforced Composites 2009 Materials and Design 30(-) 1216-1222
B. Mondal and S.C. Mishra Simulation of natural convection in the presence of volumetric radiation using the lattice Boltzmann method 2009 Numerical Heat Transfer, Part A 55(-) 18-41
B. Mondal and S.C. Mishra The lattice Boltzmann method and the finite volume method applied to conduction-radiation problems with heat flux boundary conditions 2009 International Journal for Numerical Methods in Engineering 78(2) 172-195
B. Mondal and S.C. Mishra Numerical analysis of solidification of a 3-D semitransparent medium in presence of volumetric radiation 2009 International Journal of Thermal Sciences 48(-) 1116-1128
B. Pratiher and S. K. Dwivedy Nonlinear dynamics of a soft magneto-elastic Cartesian manipulator 2009 International Journal of Nonlinear Mechanics 44(7) 757-768
B. Pratiher and S. K. Dwivedy Nonlinear Vibration of a Magneto-Elastic Cantilever Beam with Tip Mass 2009 Journal of Vibration and Acoustics 131(2) 1-9
B.B. Sahoo, N. Sahoo and U.K. Saha Effect of engine parameters and type of gaseous fuel on the performance of dual-fuel gas diesel engines – A critical review 2009 Renewable and Sustainable Energy Reviews 13(-) 1151-1184
Biswas Pankaj and Mandal N. R. 3D FEM and Experimental Thermo-mechanical analysis of Single Pass Single Sided Submerged Arc Welding of C-Mn Steel Plates 2009 Proc. IMechE, Part-B 224(-) 1-13
Biswas Pankaj and Mandal N. R. A comparative study of three different approaches of FE analysis for prediction of welding distortion of orthogonally stiffened plate panels 2009 Journal of Ship Production 25(4) 1-7
Biswas Pankaj and Mandal N. R., Experimental Study on Friction Stir Welding of Marine grade Aluminum Alloy 2009 Journal of Ship Production 25(1) 1-6
Biswas Pankaj, Mahapatra M. M. and Mandal N. R. Numerical and experimental study on prediction of thermal history and residual deformation of double sided fillet welding 2009 Part B, Journal of Engineering Manufacture 223(-) 1-10
Biswas Pankaj, Mandal N. R. and Sha, O. P. 3-D FEM and ANN prediction of thermal history and residual deformation of line heating by oxy acetylene gas flame 2009 Journal of Mechanical Behavior of Materials 19(1) 83-104
Biswas Pankaj, Mandal N. R., Saravanan M. and Velmurugan S. Experimental Study on Square-Butt Single-Pass Single-Side Submerged Arc Welding of Low-Carbon Microalloyed Steel 2009 Journal of Ship Production 25(2) 1-7
C. Subramanian and S. Senthilvelan Development and Preliminary Performance Evaluation of Discontinuous Fiber Reinforced Thermoplastic Leaf spring 2009 Journal of Materials: Design and Applications, Proc. of Ins. Mech. E Part L 223(3) 131-142
C. Subramanian and S. Senthilvelan Effect of Reinforced Fiber length on Hysteretic Heating of Discontinuous Fiber Reinforced Polypropylene 2009 International Journal of Polymeric Materials 58(7) 347-354
D. A. Perumal, V. Krishna, G. Sarvesh, A. K. Dass Numerical Simulation of Gaseous Microflows by Lattice Boltzmann Method 2009 International Journal of Recent Trends in Engineering 1(-) 15-20
D. Bandopadhya and J. Njuguna Modeling and Analysis of an IPMC Rocker Based 4-bar for Variable Path Generation Using Euler-Bernoulli Approach 2009 Journal of Mechanical Engineering Science 223(10) 2405-2411
D. Bandopadhya, B. Bhattacharya, A. Dutta Characterization of IPMC as Passive and Active Damper as an Alternative Novel Smart Actuator 2009 Journal of Reinforced Plastics and Composites 38(8) 183-200
D. Chatterjee, G. Biswas and S. Amiroudine Numerical Investigation of Forced Convection Heat Transfer in Unsteady Flow Past a Row of Square Cylinders 2009 International Journal of Heat and Fluid Flow 30(-) 1114-1128
D. S. Kumar, A. K. Dass and A. Dewan Analysis of non-Darcy models for mixed convection in a cavity using multigrid approach 2009 Numerical Heat Transfer Part A 56(8) 685-708
D.K. Ojha, U.S. Dixit and J. Paulo Davim A soft computing based optimization of multi-pass turning processes 2009 Int. J. Materials and Product Technology 35(-) 145-166
D.K. Sarma and U.S. Dixit Environment-friendly strategies for efficient utilization of cutting tools in finish turning, Transaction of ASME 2009 Journal of Manufacturing Science and Engineering 131(6) 64506-1-5
DN Basu, S Bhattacharyya and PK Das Steady-state Behavior of a Two-phase Natural Circulation Loop with Thermodynamic Nonequilibrium 2009 ASME Journal of Heat Transfer 131(2) 1-12
Eswaran M, Saha UK, and Maity D Effect of Baffles on Partially Filled Cubic Tank: Numerical Simulation and Experimental Validation 2009 Computers and Structures 87(-) 198-205
Fonseca A, Kanagaraj S, Oliveira MSA, Simoes JAO Nanocompositos para aplicacoes biomedicas 2009 O Molde Ano 21(81) 31-35
G. Biswas and S. Sarkar Effect of Thermal Buoyancy on Vortex Shedding Past a Circular Cylinder in Cross Flow at Low Reynolds Numbers 2009 International Journal of Heat and Mass Transfer 52(-) 1897-1912
G. Tomar, G. Biswas, A. Sharma and S.W.J. Welch Influence of Electric Field on Saturated Film Boiling 2009 Physics of Fluids 21(12) 1-13
Ganesh, N., N Shende and Balakrishnan, N. R-parameter: A Local truncation error based adaptive framework for finite volume compressible flow solvers 2009 Computers and Fluids 38(9) 1799-1822
Hrishikesh P. Gadgil, B. N. Raghunandan Effect of skewness on the characteristics of impinging jet atomizers 2009 Atomization and Sprays 19(1) 1-18
I. Chakraborty, B. Ray, G. Biswas, F. Durst, A. Sharma, and P. S. Ghoshdastidar Computational Investigation on Bubble Detachment from Submerged Orifice in Quiescent Liquid under Normal and Reduced Gravity 2009 Physics of Fluids 21(-) 062103-1-17
I. Khan, M., Baruah , A. Dewan, P. Mahanta Computational investigation of energy efficient pin fin cross section for a compact heat exchanger 2009 International Energy Journal 10(4) 233-246
Jagu S. Rao and R. Tiwari Design Optimization of Double-Acting Hybrid Magnetic Thrust Bearings with Control Integration Using Multi-Objective Evolutionary Algorithms. 2009 Mechatronics 19(6) 945-964
Joshi S. N. and Pande S. S. Development of an intelligent process model for EDM 2009 International Journal of Advanced Manufacturing Technology 45(3) 300-317
K. Sunil Kumar, R. Tiwari and P.V.V.N. Prasad An Optimum Design of Crowned Cylindrical Roller Bearings Using Genetic Algorithms 2009 Transactions of ASME , Journal of Mechanical Design 131(5) 051011-1-14
K. Veerababu, R. Ganesh Narayanan, G. Saravanakumar An expert system based on artificial neural network for predicting the tensile behavior of tailor welded blanks 2009 Expert system with applications 36(-) 683-695
Kulkarni V. N and Reddy K.P.J Effect of counterflow supersonic jet on blunt body heat transfer rates for oncoming high enthalpy flow 2009 Journal of engineering physics and thermophysics 8(1) 3-7
Lakshmanan, S.P., Pandey, M. Analysis of startup oscillations in natural circulation boiling systems 2009 Nuclear Engineering and Design 239(11) 2391-2398
Lakshmanan, S.P., Pandey, M., Pradeep Kumar, P., Iyer, K.N. Study of startup transients and power ramping of natural circulation boiling systems 2009 Nuclear Engineering and Design 239(6) 1076-1083
M. Ajith, R. Das, R. Uppaluri and S.C. Mishra Optimization of heat fluxes on the heater and the design surfaces of a radiating-conducting medium 2009 Numerical Heat Transfer, Part A 56(10) 846-860
M. K. Sinha, S. Deb and U.S. Dixit Design of a multi-hole extrusion process 2009 Materials and Design 30(-) 330-334
M. Sharma, S.C. Mishra and P. Acharjee Thermal efficiency study of conventional kerosene pressure stoves equipped with porous radiant inserts 2009 International Journal of Energy Research 10(4) 247-254
M.K. Sinha, S. Deb, R. Das and U.S. Dixit Theoretical and experimental investigations on multi-hole extrusion process 2009 Materials & Design 30(-) 2386-2392
Mamilla Ravi Sankar, J. Ramkumar and V.K. Jain Experimental investigation and mechanism of material removal in nano finishing of MMCs using abrasive flow finishing (AFF) process 2009 Wear 266(7-8.) 688-698
Mamilla Ravi Sankar, S. Mondal, J. Ramkumar, V.K. Jain Experimental Investigations and Modeling of Drill Bit Guided Abrasive Flow Finishing (DBG-AFF) Process 2009 International Journal of Advanced Manufacturing Technology 42(7-8.) 678-688
Muthukumar P, Linder M, Mertz R, Laurien E Measurement of thermodynamic properties of some hydrogen absorbing alloys 2009 Int. J. Hydrogen Energy 34(-) 1873-1879
Muthukumar P, Ramana SV Numerical simulation of coupled heat and mass transfer in metal hydride based hydrogen storage reactor 2009 Journal of Alloys Compound 472(-) 466-472
Muthukumar P, Satheesh A, Linder M, Mertz R, Groll M Studies on hydriding kinetics of some La-based metal hydride alloys 2009 Int. J. Hydrogen Energy 34(-) 7253-7262
Muthukumar P, Satheesh A, Madhavakrishna U, Dewan A Numerical investigation of coupled heat and mass transfer during desorption of hydrogen in metal hydride beds 2009 Energy Conversion and Management 50(1) 69-75
Muthukumar P, Umekar MM Study of coupled heat and mass transfer during absorption in a MmNi4.6Al0.4 based hydrogen storage device 2009 Sadhana 34(-) 255-270
N. Raghavendra, Rakshit Koranne, Sukhomay Pal, Surjya K. Pal and Arun K. Samantaray Joint strength prediction in a pulsed MIG welding process using hybrid optimized model 2009 International Journal of Advanced Manufacturing Technology 41(-) 694-705
P. Goswami, L. Barbora, S.S. Cameotra, P. Mahanta, S. Chatterjee Silk-fiber immobilized lipase-catalyzed hydrolysis of emulsified sunflower oil 2009 Applied Biochemistry and Biotechnology 157(3) 593-600
P. Kalita, G. Mohan, G. P. Kumar and P. Mahanta Determination and comparison of kinetic parameters of low density biomass Fuels 2009 Journal of Renewable and Sustainable Energy, American Institute of Physics 1(23109) 1-12
P. Kumari, J.K. Nath, S. Kapuria, P.C. Dumir Efficient global zigzag theory for elastic laminated plates 2009 Journal of Reinforced Plastics and Composites 28(9) 1025-1047
P.C. Dumir, P. Kumari, S. Kapuria Assessment of third order smeared and zigzag theories for buckling and vibration of flat angle-ply hybrid piezoelectric panels 2009 Composite Structures 90(3) 346-362
P.P. Gudur and U.S. Dixit An application of fuzzy inference for studying the dependency of roll force and roll torque on process variables in cold flat rolling 2009 Int. J. Advanced Manufacturing Technology 42(1) 41-52
Panigrahy PK, Saha UK, and Maity D Experimental Studies on Sloshing Behaviour Due to Horizontal Movement of Liquids in Baffled Tanks 2009 Ocean Engineering 36(-) 213-222
R. Das, S.C. Mishra and R. Uppaluri Retrieval of thermal properties in a transient conduction radiation problem with variable thermal conductivity 2009 International Journal of Heat and Mass Transfer 52(-) 2749-2758
R. Muthukumaran and S.C. Mishra Analysis of the transport of a train of short-pulse radiation of Gaussian temporal profile through a 2-D participating medium 2009 Heat Transfer Engineering 30(14) 1197-1207
R.M. Bhatnagar, B. Bhattacharya and G. Biswas Analysis of Pilot Valve and Taper Groove Based Damper 2009 Proceedings of I Mech E London Part C, J. Mechanical Engineering Science 223(-) 859-871
Roy T. and Chakraborty D. Genetic algorithm based optimal control of smart composite shell structures under mechanical loading and thermal gradient 2009 Smart Materials and Structures 18(11) 1-12
Roy T. and Chakraborty, D. Optimal Vibration Control of Smart Fiber Reinforced Composite Shell Structures using Improved Genetic Algorithm 2009 Journal of Sound and Vibration 319(-) 15-40
Roy T. and Chakraborty, D. Genetic Algorithm based Optimal Design for Vibration Control of Composite Shell Structures using Piezoelectric Sensors and Actuators 2009 International Journal of Mechanics of Materials and Design 5(1) 45-60
S. Bag, A. De and T. DebRoy A genetic algorithm assisted inverse convective heat transfer model for tailoring weld geometry 2009 Materials and Manufacturing Processes 24(3) 384-397
S. Bag, A. Trivedi and A. De Development of a finite element based conduction mode heat transfer model for laser welding process using an adaptive volumetric heat source 2009 International Journal of Thermal Science 48(10) 1923-1931
S. D. Kore, P. P. Date, S.V. Kulkarni, Satendra Kumar, Dolly Rani, M. R. Kulkarni, S.V. Desai, R.K. Rajawat, K.V. Nagesh, and D.P. Chakravarty Electromagnetic Welding of Al-to-Al-Li Sheets 2009 ASME, Journal of Manufacturing Science and Engineering 131(-) 1-4
S. Kakati, P. Mahanta Effect of fin-aided burner on thermal performance of pressurized kerosene stove 2009 Journal of Enhanced Heat Transfer 16(1) 35-42
S. Kapuria, P. Kumari, J.K. Nath Analytical piezoelasticity solution for vibration of piezoelectric laminated angle-ply circular cylindrical panels 2009 Journal of Sound and Vibration 324(04-05.) 832-849
S. R. Deepak and G. K. Ananthasuresh James watt and his linkages 2009 Resonance 14(-) 530-543
S. R. Deepak, M. Dinesh, D. K. Sahu, and G. K. Ananthasuresh A comparative study of the formulations and benchmark problems for the topology optimization of compliant mechanisms 2009 Journal of Mechanisms and Robotics 1(1) 1-8
S. Sen, S. Mittal and G. Biswas Steady Separated Flow Past a Circular Cylinder at Low Reynolds Numbers 2009 Journal of Fluid Mechanics 620(-) 89-119
S. Senthilvelan and R. Gnanamoorthy Efficiency of Injection Molded Polymer Composite Spur Gears 2009 Journal of Engineering Tribology, Proc. of Ins. Mech. E Part J 226(6) 925-928
S.C. Mishra and  T.B. Pavan Kumar Analysis of a hyperbolic heat conduction-radiation problem with temperature dependent thermal conductivity 2009 ASME Journal  of Heat Transfer 131(-) 111302: 1-7
S.C. Mishra, B. Mondal, T. Kush and B.S.R. Krishna Solving transient heat conduction problems on uniform and non-uniform lattices using the lattice Boltzmann method 2009 Int. Communications in Heat and Mass Transfer 36(-) 322-338
S.C. Mishra, M.Y. Kim, R. Das, M. Ajith and R. Uppaluri Lattice Boltzmann method applied to the analysis of transient conduction-radiation problem in a cylindrical medium 2009 Numerical Heat Transfer, Part A 56(-) 42-59
Sahoo BB, Sahoo N, and Saha UK Effect of Engine Parameters and Type of Gaseous Fuel on the Performance of Dual Fuel Gas Diesel Engines - A Critical Review 2009 Renewable and Sustainable Energy Reviews 13(-) 1151-1184
Satheesh A, Muthukumar P, Dewan A Computational study of metal hydride cooling system 2009 Int. J. Hydrogen Energy 34(-) 3164-3172
Satyajit Panda and M. C. Ray Active control of geometrically nonlinear vibrations of functionally graded laminated composite plates using piezoelectric fiber reinforced composites 2009 Journal of Sound and Vibration 325(-) 186-205
Satyajit Panda and M. C. Ray Control of nonlinear vibrations of functionally graded plates using 1-3 piezoelectric composite 2009 AIAA Journal 47(-) 1421-1434
Sukhomay Pal, Santosh Malviya, Surjya K. Pal and Arun K. Samantaray Optimization of quality characteristics parameters in a pulsed metal inert gas welding process using grey-based Taguchi method 2009 International Journal of Advanced Manufacturing Technology 44(-) 1250-1260
A. Banerjee, B. Bhattacharya, and A. K. Mallik Large deflection of cantilever Beams with geometric non-linearity: Analytical and numerical approaches 2008 International Journal of Non-linear Mechanics 43(-) 366-376
A. Dalal, V. Eswaran and G. Biswas A Finite Volume Method for Navier-Stokes Equations on Unstructured Meshes 2008 Numerical Heat Transfer Part B 54(3) 238-259
A. N. Reddy and G. K. Ananthasuresh On computing forces from the noisy displacement data of an elastic body 2008 International Journal for Numerical Methods in Engineering 76(11) 1645-1677
A.K Sarma ,J.K.Sarmah, L.Barbora, , P.Kalita, S.Chatterjee, P. Mahanta ,P.Goswami Recent inventions in biodiesel production and processing - A review 2008 Recent Patents on Engineering 2(1) 47-58
Anil Borah, P.S. Robi, Ajit L. Mujumdar, A. Srinivasan Microstructural evolution and hardening behaviour of cast and heat-treated ru-al and ru-al-ni alloys 2008 Metals and Materials International 14(1) 123-132
B. Kaushik, K.S.R.K. Murthy and P.S. Robi Determination of strain gage locations for accurate measurement of the opening mode stress intensity factors 2008 Journal of Mechanics of Materials and Structures 3(-) 1757-1771
B. Mondal and S.C. Mishra Lattice Boltzmann method applied to the solution of the energy equations of the transient conduction and radiation problems on non-uniform lattices 2008 International Journal of Heat and Mass Transfer 51(-) 68-82
B. Mondal, S.C. Mishra, P. Asinari and R. Borchiellini Analysis of a localized fire in a 3-D tunnel using a hybrid solver: Lattice Boltzmann method, finite volume method and fully explicit upwind scheme 2008 Numerical Heat Transfer, Part A 53(4) 392-417
B. Pratiher and S. K. Dwivedy Nonlinear Vibration of a Single Link Viscoelastic Cartesian Manipulator 2008 International Journal of Nonlinear Mechanics 43(-) 683-696
B.B. Sahoo, N. Sahoo, P. Mahanta, L. Borbora, P. Kalita and U.K. Saha Performance assessment of a solar still using blackened surface and thermocol insulation 2008 Renewable Energy 33(7) 1703-1708
Biswas Pankaj and Mandal N. R. Welding Distortion Simulation of Large Stiffened Plate Panels 2008 Journal of Ship Production 24(1) 50-56
Biswas Pankaj, Mandal N. R. and Sha O.P. A study on generation of compound curved surfaces by line heating using oxy-acetylene gas flame 2008 Journal of Ship Production 24(4) 180-189
C. Subramanian and S. Senthilvelan Effect of Fiber length on the Friction and Wear of Discontinuous Fiber Reinforced Polypropylene Material 2008 International Journal of Plastics Technology 12(-) 863-875
D. Bandopadhya, B. Bhattacharya, A. Dutta Pseudo-Rigid Body Modeling of IPMC for a Partially Compliant 4-bar Mechanism for Work Volume Generation 2008 Journal of Intelligent Material Systems and Structures 20(1) 51-61
D. Bandopadhya, B. Bhattacharya, A. Dutta Active vibration control strategy for a single link flexible manipulator using ionic polymer metal composites 2008 Journal of Intelligent Material Systems and Structures 19(-) 487-496
Dalal, A., and Das, M. K. Heatline Method for the Visualization of Natural Convection in a Complicated Cavity 2008 International Journal of Heat and Mass Transfer 51(-) 263-272
DN Basu, S Bhattacharyya and PK Das Effect of Geometric Parameters on Steady-state Performance of Single-phase NCL with Heat Loss to Ambient 2008 International Journal of Thermal Sciences 47(10) 1359-1373
G. Tomar, G. Biswas Multi-mode Analysis of Bubble Growth in Saturated Film Boiling 2008 Physics of Fluids 20(-) 1-7
G.V. Durga Prasad, M. Pandey Stability analysis and nonlinear dynamics of natural circulation boiling water reactors 2008 Nuclear Engineering and Design 238(-) 229-240
G.V. Durga Prasad, G. Gopa Kishor, M. Pandey, U.S. Dixit Numerical simulations and design optimization of the PHT loop of natural circulation BWR 2008 Science and Technology of Nuclear Installations 2008(-) 1-12
G.V. Durga Prasad, M. Pandey, S.K. Pradhan, S.K. Gupta Study of flow instabilities in double channel natural circulation boiling systems 2008 Nuclear Engineering and Design 238(-) 1750-1761
Garg. S., Patra, K., Pal, S. K., and Chakraborty, D. Effect of Different Basis Functions on a Radial Basis Function Network in Prediction of Drill Flank Wear from Motor Current Signals 2008 Soft Computing - A Fusion of Foundations, Methodologies and Applications, Springer Publications 12(8) 777-787
J. C. Kalita, A. K. Dass and N. Nidhi An efficient transient Navier-Stokes solver on compact nonuniform space grids 2008 Journal of computational and applied mathematics 214(-) 148-162
Jagu S. Rao and R. Tiwari Optimum Design and Analysis of Thrust Magnetic Bearings Using Multi Objective Genetic Algorithms 2008 International Journal for Computational Methods in Engineering Science and Mechanics 9(4) 223-245
K. Sunil Kumar, R. Tiwari and R. S. Reddy Development of an Optimum Design Methodology of Cylindrical Roller Bearing Using Genetic Algorithms. 2008 International Journal for Computational Methods in Engineering Science and Mechanics 9(6) 321-341
Kanagaraj S, Guedes RM, Oliveira MSA, Simoes JAO Dynamic Mechanical Analysis of Multi-Walled Carbon Nanotube/HDPE Composites 2008 Journal of Nanoscience and Nano Technology 8(-) 4008-4012
Kulkarni V. N and Reddy K.P.J. Enhancement in counterflow drag reduction by supersonic jet in high enthalpy flows 2008 Physics of Fluids 20(-) 1-4
Kulkarni V. N, Hegde G. M, Jagadeesh G., Arunan E. and Reddy K.P.J Aerodynamic drag reduction by heat addition into the shock layer for a large angle blunt cone in hypersonic flow 2008 Physics of Fluids 20(-) 1-2
M. Karthikeyan, R. Tiwari and S. Talukdar Development of a Novel Algorithm for a Crack Detection, Localization and Sizing in a Beam based on Forced Response Measurements. 2008 Transactions of ASME, Journal of Vibration and Acoustics 130(2) 021002-1-14
M. Nishi, B. Uensal, F. Durst and G. Biswas Laminar-to-Turbulent Transition of Pipe Flows through Puffs and Slugs 2008 Journal of Fluid Mechanics 614(-) 425-446
M. Pathak, A. Dewan and A.K. Dass Distribution of Temperature as a Passive Scalar in the Flow Field of a Heated Turbulent Jet in a Crossflow 2008 Numerical Heat Transfer 54(-) 67-92
M. Pathak, A.K. Dass, and A. Dewan An Investigation of Turbulent Rectangular Jet Discharged into a Narrow Channel Weak Crossflow 2008 Journal of Hydrodynamics 20(2) 154-163
M. Pathak, N. Sahoo and A. Dewan Experimental investigation of pressure gradient characteristics in a mass flow rate controlled pulsating pipe flow 2008 Institute of Engineers Journal (India) 89(-) 1-5
M. Sivasankar,T. Benarjee, N. Ravikiran, D. Chakraborty and S. K. Dwivedy Dynamic stress and Fatigue analysis of artificial hip prosthesis 2008 Indian Journal of  Biomechanics 1(1) 53-58
Mago, P.J.,Srinivasan, K., Chamra, L.M., and Somayaji, C. An Examination of Exergy Destruction in Organic Rankine Cycles 2008 International Journal of Energy Research 32(10) 926-938
Manas Das, V.K. Jain, P.S. Ghoshdastidar Fluid Flow Analysis of Magnetorheological Abrasive Flow Finishing (MRAFF) Process 2008 International Journal of Machine Tools and Manufacture 48(-) 415-426
Manas Das, V.K. Jain, P.S. Ghoshdastidar Analysis of Magnetorheological Abrasive Flow Finishing (MRAFF) Process 2008 International Journal of Advanced Manufacturing Technology 38(-) 613-621
Muthukumar P, M. Maiya MP, Murthy SS Performance tests on a thermally operated hydrogen compressor 2008 Int. J. Hydrogen Energy 33(-) 463-469
Muthukumar P, Maiya MP, Murthy SS, Vijay R, Sundaresan R Tests on mechanically alloyed Mg2Ni for hydrogen storage 2008 Journal of Alloys and Compound 452(2) 456-461
N. Senthil Kumar and G. Biswas A Finite Element Study of the Onset of Vortex Shedding in a Flow Past Two-dimensional Circular Cylinder 2008 Progress in Computational Fluid Dynamics 8(-) 288-298
P. Kalita, U.S. Dixit, P. Mahanta and U.K. Saha A Novel Energy Efficient Machine for Plate Manufacturing from Arecanut Leaf Sheath 2008 Journal of Scientific & Industrial Research 67(10) 807-811
P. Kumari, J.K. Nath, S. Kapuria, P.C. Dumir An improved third order theory and assessment of efficient zigzag theory for angle-ply flat hybrid panels 2008 Composite Structures 83(2) 226-236
P. Mahanta, J.K. Sarmah, P.Kalita, A.Shrivastava Parametric study on transesterification process for biodiesel production from pongamiapinnata and Jatrophacurcus oil 2008 International Energy Journal 9(1) 41-46
P.C. Dumir, J.K. Nath, P. Kumari, S. Kapuria Improved efficient zigzag and third order theories for circular cylindrical shells under thermal loading 2008 Journal of Thermal Stresses 31(4) 343-367
P.C. Dumir, S. Kapuria, P. Kumari, J.K. Nath Two-dimensional benchmark solution for buckling and vibration of simply supported hybrid piezoelectric angle-ply flat panels 2008 ZAMM-Zeitschrift Fur Angewandte Mathematik Und Mechanik 88(1) 42-57
P.P. Gudur and U.S. Dixit A neural network-assisted finite element analysis of cold flat rolling 2008 Engineering Applications of Artificial Intelligence 21(-) 43-52
P.P. Gudur and U.S. Dixit A combined finite element and finite difference analysis of cold flat rolling 2008 Transaction of ASME, Journal of Manufacturing Science and Engineering 130(-) 1-6
P.P. Gudur, M.A. Salunkhe and U.S. Dixit A theoretical study on the application of asymmetric rolling for the estimation of friction 2008 International Journal of Mechanical Sciences 50(-) 315-327
Panda, S. S., Chakraborty, D. and Pal, S. K. Drill Wear Prediction using Different Neural Network Architecture 2008 International Journal of Knowledge-Based and Intelligent Engineering Systems 12(5) 327-338
R. Das, S.C. Mishra and R. Uppaluri Simultaneous reconstruction of thermal field and retrieval of parameters in a cylindrical enclosure 2008 Numerical Heat Transfer, Part A 54(-) 983-998
R. Das, S.C. Mishra and R. Uppaluri Multi-parameter estimation in a transient conduction-radiation problem using the lattice Boltzmann method and the finite volume method coupled with the genetic algorithms 2008 Numerical Heat Transfer, Part A 53(12) 1321-1338
R. Das, S.C. Mishra, M. Ajith and R. Uppaluri An inverse analysis of a transient 2-D conduction-radiation problem using the lattice Boltzmann method and the finite volume method coupled with the genetic algorithm 2008 Journal of Quantitative Spectroscopy and Radiative Transfer 109(11) 2060-2077
R. Ganesh Narayanan, K. Narasimhan Computer Simulation and Validation of Tensile behavior of Tailor welded Blanks (TWB) 2008 International Journal: Computer and Experimental Simulations in Engineering and Science 1(3) 79-86
R. Ganesh Narayanan, K. Narasimhan Influence of weld conditions on the forming limit strains of welded blanks 2008 Journal of Strain Analysis for Engineering Design 43(4) 217-227
R. Ganesh Narayanan, K. Narasimhan Predicting the forming limit strains of tailor welded blanks 2008 Journal of Strain Analysis for Engineering Design 43(7) 551-563
R. Ganesh Narayanan, M. Gopal, A. Rajadurai Influence of friction in simple upsetting and prediction of hardness distribution in cold forged product 2008 Journal of Testing and Evaluation 36(4) 371-383
R. Muthukumaran and S.C. Mishra Effects of the incidence of a Gaussian-temporal short-pulse laser of different spatial profiles on a 2D rectangular inhomogeneous participating medium 2008 Numerical Heat Transfer, Part A 54(-) 525-545
R. Muthukumaran and S.C. Mishra Radiative transfer of a short-pulse laser wave of Gaussian temporal profile through a 2-D participating medium containing inhomogeneities of different shapes at various locations 2008 Numerical Heat Transfer, Part A 54(-) 546-567
R. Muthukumaran and S.C. Mishra Interaction of a short-pulse laser of a Gaussian temporal profile with an inhomogeneous medium 2008 Numerical Heat Transfer, Part A 53(-) 625-640
R. Muthukumaran and S.C. Mishra Thermal signatures of a localized inhomogeneity in a 2D participating medium subjected to an ultra-fast step-pulse laser wave 2008 Journal of Quantitative Spectroscopy and Radiative Transfer 109(-) 705-726
R. Muthukumaran and S.C. Mishra Effect of a step short-pulse laser train on an inhomogeneous planar participating medium 2008 Int. Communications in Heat and Mass Transfer 35(9) 1073-1078
R. Muthukumaran and S.C. Mishra Transport of a train of short-pulse radiation of step temporal profile through a 2-D participating medium 2008 International Journal of Heat and Mass Transfer 51(-) 2282-2298
R. Muthukumaran and S.C. Mishra Transient response of a planar participating medium subjected to a train of short-pulse radiation 2008 International Journal of Heat and Mass Transfer 51(-) 2418-2432
R. Ranjan, A. Dalal and G. Biswas A Numerical Study of Fluid flow and Heat Transfer around a Square Cylinder at Incidence using Unstructured Grids 2008 Numerical Heat Transfer Part A 54(-) 890-913
R. Tiwari and V. Chakravarthy Simultaneous Estimation of the Residual Unbalance and Bearing Dynamic Parameters from the Experimental Data in a Rotor-Bearing System 2008 Mechanism and Machine Theory 44(4) 792-812
Roy T. and Chakraborty, D. GA-LQR based Optimal Vibration Control of Smart FRP Composite Structures with bonded PZT patches 2008 Journal of Reinforced Plastics and Composites 28(11) 1383-1404
S. Bag and A. De Development of an efficient numerical heat transfer model coupled with genetic algorithm based optimization for the prediction of process variables in GTA spot welding 2008 Science and Technology of Welding and Joining 14(4) 333-345
S. Bag and A. De Development of a three-dimensional heat transfer model for GTAW process using finite element method coupled with a genetic algorithm based identification of uncertain input parameters 2008 Metallurgical and Materials Transactions A 39A(11) 2698-2710
S. Bag, A. Trivedi and A. De Use of multivariate optimization algorithm to develop self-consistent numerical heat transfer model for laser spot welding 2008 International Journal of Advanced Manufacturing Technology 38(-) 575-585
S. k. Dwivedy and Hari Babu Bagudu Longitudinal vibration of uniform and non –uniform rods using p-refinement 2008 Advances in Vibration Engineering 7(2) 143-154
S. K. Laha, H. Banjare, S. K. Kakoty Stability analysis of flexible rotor supported on finite hydrodynamic porous journal bearing using non-linear transient method 2008 Journal of Engineering Tribology 222(7) 963-974
S. K. Roy, Sukhomay Pal, Samir Kumar Ghosh, P. P. Dey Machining of interpenetrating phase Aluminim/Alumina composite by electrical discharge technique 2008 Transaction of Indian Ceramic Society 67(2) 75-80
S. R. Deepak and A. Ghosal Special coordinates associated with recursive forward dynamics algorithm for open loop rigid multibody systems 2008 Mechanics 75(5) 1-11
S. S. Panda, D. Chakraborty and S. K. Pal Flank Wear Prediction in Drilling using Back Propagation Neural Network and Radial Basis Function Network 2008 Applied Soft Computing 8(2) 858-871
S. Swamy, M.V. Srikanth, K.S.R.K. Murthy and P.S. Robi Determination of the mode I stress intensity factors of the complex configurations using the strain gages 2008 Journal of Mechanics of Materials and Structures 3(-) 1239-1255
S.C. Mishra, A. Shukla and V. Yadav View factor calculation in the 2-D geometries using the collapsed dimension method 2008 Int. Communications in Heat and Mass Transfer 35(-) 630-636
S.C. Mishra, N.A. Krishna, N. Gupta and G.R. Chaitanya Combined conduction and radiation heat transfer with variable thermal conductivity and variable refractive index 2008 International Journal of Heat and Mass Transfer 51(-) 83-90
S.C. Mishra, N.C. Behera, A.K. Garg and A. Mishra Solidification of a 2-D semitransparent medium using the lattice Boltzmann method and the finite volume method 2008 International Journal of Heat and Mass Transfer 51(-) 4447-4460
S.C. Mishra, T.B. Pavan Kumar and B. Mondal Lattice Boltzmann method applied to the solution of energy equation of a radiation and non-Fourier heat conduction problem 2008 Numerical Heat Transfer, Part A 54(8) 798-818
S.D. Kore, P.P. Date, S.V. Kulkarni Electromagnetic impact welding of aluminum to stainless steel sheets 2008 Journal of Materials Processing Technology 208(1-3.) 486-493
Saha UK, Mitra M, Menon SJ, John NT, Gajapathi SS, and Behera P Preliminary Design Analysis of a Light Weight Combat Aircraft, Proc. of the IMechE 2008 Part – G: Journal of Aerospace Engineering 222(-) 507-513
Saha UK, Thotla S and Maity D Optimum Design Configuration of Savonius Rotor through Wind Tunnel Experiments 2008 Journal of Wind Engineering & Industrial Aerodynamics 96(-) 1359-1375
Satyajit Panda and M. C. Ray Geometrically nonlinear analysis of smart functionally graded plates integrated with a layer of vertically reinforced 1-3 piezoelectric composite 2008 Acta Mechanica 198(-) 235-251
Satyajit Panda and M. C. Ray Finite Element Analysis for Geometrically Nonlinear Deformations of Smart Functionally Graded Plates Using Vertically Reinforced 1-3 Piezoelectric Composite 2008 International journal of Mechanics and Materials in Design 4(-) 239-253
Satyajit Panda and M. C. Ray Nonlinear Finite Element Analysis of Functionally Graded Plates Integrated with Patches of Piezoelectric Fiber Reinforced Composite 2008 Finite Elements in Analysis and Design 44(-) 493-504
Satyajit Panda and M. C. Ray Active Constrained Layer Damping of Geometrically Nonlinear Vibrations of Functionally Graded Plates Using Piezoelectric Fiber Reinforced Composites 2008 Smart Materials and Structures 17(2) 1-15
Somayaji, C., Mago, P.J., Chamra, L.M., and Srinivasan, K. An Examination of Regenerative Rankine Cycles Using Dry Fluids. 2008 Applied Thermal Engineering 28(8-9.) 998-1007
Sukhomay Pal, Surjya K. Pal and Arun K. Samantaray Sensor based weld bead geometry prediction in pulsed metal inert gas welding process through artificial neural networks 2008 International Journal of Knowledge-Based and Intelligent Engineering Systems 12(2) 101-114
Sukhomay Pal, Surjya K. Pal and Arun K. Samantaray Artificial neural network modeling of weld joint strength prediction of a pulsed metal inert gas welding process using arc signals 2008 Journal of Materials Processing Technology 202(1-3.) 464-474
Sukhomay Pal, Surjya K. Pal and Arun K. Samantaray A Neuro-wavelet packet analysis based on current signature for weld joint strength prediction in a pulsed metal inert gas welding process 2008 Science and Technology of Welding and Joining 13(7) 638-645
SushovanChatterjee , LepakshiBarbora , Swaranjit Singh ,Cameotra ,PinakeswarMahanta,PranabGoswami Silk-fiber immobilized lipase-catalyzed   hydrolysis of emulsified sunflower oil 2008 Applied Biochemistry and Biotechnology 157(-) 593-600
Y.S. Kushwah, P. Mahanta and S.C. Mishra Some studies on fuel characteristics of Mesua Ferrea 2008 Heat Transfer Engineering 29(4) 405-409
A. Garg, P.S. Sastry, M. Pandey, U.S. Dixit, S.K. Gupta Numerical simulations and artificial neural network modeling of natural circulation boiling water reactor 2007 Nuclear Engineering and Design 237(3) 230-239
A. K. De and A. Dalal Numerical Study of Laminar Forced Convection Fluid Flow and Heat Transfer From a Triangular Cylinder Placed in a Channel 2007 Journal of Heat Transfer-Transactions of the ASME 129(5) 646-656
A. K. De and V. Eswaran A high-order accurate method for two-dimensional incompressible viscous flows 2007 International Journal for Numerical Methods in Fluids 53(-) 1613-1628
A. Trivedi, S. Bag and A. De Three dimensional transient heat conduction and thermomechanical analysis for laser spot welding using adaptive heat source 2007 Science and Technology of Welding and Joining 12(1) 24-31
Ajit Mujumdar, Masayuki Horio, P. S. Robi, R. Swarnkar, M. Malik Experimental investigation and validation of mixing and segregation behavior of granular flow in sectorial container 2007 Journal of Chemical Engineering of Japan 40(8) 652-657
Anil Borah, P.S. Robi, A. Srinivasan Synthesis of nano-crystalline rual by mechanical alloying 2007 Metals and Materials International 13(4) 293-302
B. Mondal and S.C. Mishra Application of the lattice Boltzmann method and discrete ordinate method for solving transient conduction and radiation heat transfer problems 2007 Numerical Heat Transfer, Part A 52(8) 757-777
B. Pratiher and S. K. Dwivedy Parametric instability of a cantilever beam with magnetic field and periodic axial load 2007 Journal of Sound and Vibration 305(4-5.) 904-917
B. Pratiher and S. K. Dwivedy Nonlinear dynamics of flexible single –link Cartesian Manipulator 2007 International Journal of Nonlinear Mechanics 42(-) 1062-1073
B. Rajeswara Rao and R. Tiwari Optimum Design of Rolling Element Bearings Using Genetic Algorithms 2007 Mechanism and Machine Theory 42(2) 233-250
Biswas Pankaj, Mandal N. R. and Sha O. P. Three Dimensional Finite Element Prediction of Transient Thermal History and Residual Deformation due to Line Heating 2007 Journal of Engineering for the Maritime Environment 221(-) 17-30
C. D. Shete, N. K. Chandiramani, and L. I. Librescu Optimal Control of Pretwisted Shearable Smart Composite Rotor Blades 2007 Acta Mechanica 191(-) 37-58
D. Bandopadhya, B. Bhattacharya, A. Dutta An Active Vibration Control Strategy for a Flexible Link Using Distributed Ionic Polymer Metal Composites 2007 Smart Materials and Structures 13(-) 617-625
D. Bandopadhya, B. Bhattacharya, A. Dutta Modeling of Hybrid Damping Scheme Using Smart Magnetostrictive Composites for Flexible Manipulator 2007 Journal of Reinforced Plastics and Composites 26(-) 861-880
D. Chakraborty Delamination of laminated fiber reinforced plastic composites under multiple cylindrical impact 2007 Materials and Design 28(4) 1142-1153
D. K. Sarma and U.S. Dixit A comparison of dry and air-cooled turning of grey cast iron with mixed oxide ceramic tool 2007 Journal of Materials Processing Technology 190(-) 160-172
Dalal, A., and Das, M. K. Flow and Thermal Study of Laminar Natural Convection in a Complicated Cavity Heated from Top with Sinusoidal Temperature and Cooled from Other Sides 2007 Computers and Fluids 36(-) 680-700
De, A. K, and Dalal, A. Numerical Study of Forced Convection Fluid Flow and Heat Transfer from a Triangular Cylinder Placed in a Channel 2007 ASME Journal of Heat Transfer 126(5) 646-656
DN Basu, S. Bhattacharyya and PK Das Effect of Heat Loss to Ambient on Steady-state Behaviour of a Single-phase Natural Circulation Loop 2007 Applied Thermal Engineering 27(8-9.) 1432-1444
G. Madhusudhana, G.S.V.L. Narasimham Laminar conjugate mixed convection in a vertical channel with heat generating components 2007 International Journal of Heat and Mass Transfer 50(-) 3561-3574
G. Tomar, A. Sharma, V. Shenoy and G. Biswas Surface Instability of Confined Elastic Bilayers: Theory and Simulations 2007 Physical Review E 76(1) 1-8
G. Tomar, D. Gerlach, G. Biswas, N. Alleborn, A. Sharma, F. Durst S. W. J. Welch , and A. Delgado Two-phase Electrohydrodynamic Simulations Using a Volume of Fluid Approach 2007 Journal of Computational Physics 227(-) 1267-1285
G. Tomar, V. Shankar, A. Sharma and G. Biswas Electrohydrodynamic Instability of a Confined Viscoelastic Liquid Film 2007 Journal of Non-Newtonian Fluid Mechanics 143(-) 120-130
G.V. Durga Prasad, M. Pandey, M.S. Kalra Review of research on flow instabilities in natural circulation boiling systems 2007 Progress in Nuclear Energy 49(-) 429-451
K Arul Prakash, B V Rathish Kumar and G Biswas A Numerical Study of the Target System of an ADSS with Different Flow Guides 2007 PRAMANA 68(-) 365-376
K. Arul Prakash, G. Biswas and B.V. Rathish Kumar Numerical Prediction of Fluid Flow and Heat Transfer in the Target System of an Axisymmetric Accelerator Driven Subcritical System 2007 Journal of Heat Transfer (ASME) 129(-) 582-588
Kanagaraj S, Varanda FR, Zhiltsova TV, Oliveira MSA, Simoes JAO Mechanical properties of high density polyethylene/carbon nanotube composites 2007 Composites Science and Technology 67(-) 3070-3077
Khoo W.K.S., Kalita K. & Garvey S.D. The specific load capacity of radial-flux radial magnetic bearings 2007 IEEE Transactions on Magnetics 43(7) 3293-3300
M. Kalita and S. K. Kakoty Regarding Stability study of circular and non-circular bearings supporting rigid and flexible rotors 2007 Advances in Vibration Engineering 6(4) 371-381
M. Karthikeyan, R. Tiwari and S. Talukdar Development of a Technique to Locate and Quantify a Beam Crack Based on Modal Parameters 2007 Transactions of ASME, Journal of Vibration and Acoustics 129(3) 390-395
M. Karthikeyan, R. Tiwari and S. Talukdar Crack Localization and Sizing in a Beam Based on the Free and Forced Response Measurements 2007 Mechanical Systems and Signal Processing 21(3) 1362-1385
M.C.Borah , P. Mahanta, S.K. Kakoty, U.K. Saha, A.D. Sahasrabudhe Study of quality parameters in vermicomposting 2007 Indian Journal of Biotechnology 6(3) 410-413
M.Pathak, A.Dewan and A.K.Dass Effect of Streamline Curvature on Flow Field of a Turbulent Plane Jet in Cross Flow 2007 Mechanics Research Communications 34/3(-) 241-248
Mago, P.J., Chamra, L.M., and Somayaji, C. Analysis and Optimization of Organic Rankine Cycles 2007 IMechE Journal of Power and Energy 221(3) 255-263
Muthukumar P, Madhavakrishna U, Dewan A Parametric studies on a metal hydride based hydrogen storage device 2007 Int. J. Hydrogen Energy 32(-) 4988-4997
N. Sahoo, D.R. Mahapatra, G. Jagadeesh, S. Gopalakrishnan and K.P.J. Reddy Design and analysis of a flat accelerometer based force balance for shock tunnel testing 2007 Measurement 40(1) 93-106
N.R. Abburi and U.S. Dixit Multi-objective optimization of multipass turning processes 2007 Int. J. Adv. Manuf. Tech. 32(9-10.) 902-910
P. Kumari, J.K. Nath, P.C. Dumir, S. Kapuria 2D exact solutions for flat hybrid piezoelectric and magnetoelastic angle-ply panels under harmonic load 2007 Smart Materials and Structures 16(5) 1651-1661
P. Mahadevan, U. S. Dixit and P. S. Robi Analysis of cold rigid-plastic axisymmetric forging problem by radial basis function collocation method 2007 Intl. Journal of Advanced Manufacturing Technology 34(-) 464-473
P. Mahanta, S. C. Mishra, and Y. S. Khushwah Some studies on fuel characteristics of mesuaferrea 2007 International Journal of Heat Transfer Engineering 29(4) 405-409
P.R. Parida, R. Raj, Amit Prasad and S.C. Mishra Solidification of a semitransparent planar layer subjected to radiative and convective cooling 2007 Journal of Quantitative Spectroscopy and Radiative Transfer 107(-) 226-235
R. Ganesh Narayanan, K. Narasimhan Relative effect of material and geometric parameters on the forming behavior of Tailor Welded Blanks (TWB) 2007 International Journal of Forming Processes 10(2) 145-178
R. Singh and S.C. Mishra Analysis of radiative heat transfer in a planar participating medium subjected to diffuse and/or collimated radiation – A comparison of the DTM, the DOM and the FVM 2007 Numerical Heat Transfer, Part A 52(-) 481-496
R. Singh, S.C. Mishra, N.K Roy, N.S. Sekhawat and K. Mitra An insight into the modeling of short-pulse laser transport through a participating medium 2007 Numerical Heat Transfer, Part B 52(4) 373-385
S. Bag and A. De Three dimensional heat transfer modeling of laser beam welding using adaptive volumetric heat source and GA based optimization of absorption coefficient 2007 Indian Welding Journal 42(2) 43-48
S. Basak, U. S. Dixit and J. P. Davim Application of radial basis function neural networks in optimization of hard turning of AISI D2 cold-worked tool steel with a ceramic tool 2007 Proc. IMechE Part B: J. Engineering Manufacture 221(-) 987-998
S. Gupta, R. Tiwari and S.B. Nair Multi-objective Design Optimization of Rolling Bearings using Genetic Algorithms 2007 Mechanism and Machine Theory 42(10) 1418-1443
S. K. Dwivedy, Kiran C. Sahu and Sk. Babu Parametric instability regions of three layered soft-cored sandwich beam using higher order theory 2007 Journal of Sound and Vibration 304(-) 326-344
S. Kakati, P. Mahanta and S. K. Kakoty Performance analysis of pressurized kerosene stove with porous medium inserts 2007 Journal of Scientific and Industrial Research (JSIR) 66(-) 565-569
S. Kirtania and D. Chakraborty Finite Element based Characterization of Carbon Nanotubes 2007 Journal of Reinforced Plastics and Composites 26(15) 1557-1570
S. S. Panda, D. Chakraborty and S. K. Pal Monitoring of drill flank wear using fuzzy back propagation neural network 2007 International Journal of Advanced Manufacturing Technology 34(3) 227-235
S. T. Vagge, V. S. Raja, R. Ganesh Narayanan Effect of deformation on the electrochemical behavior of hot-dip galvanized steel sheets 2007 Applied Surface Science 253(20) 8415-8421
S.C. Mishra and H.K. Roy Solving transient conduction-radiation problems using the lattice Boltzmann method and the finite volume method 2007 Journal of Computational Physics 233(-) 89-107
S.D. Kore, P.P. Date, S.V. Kulkarni Effect of process parameters on electromagnetic impact welding of aluminum sheets 2007 International Journal of Impact Engineering 34(8) 1327-1341
S.Garg, S. K. Pal, D. Chakraborty Evaluation of the performance of backpropagation and radial basis function neural networks in predicting the drill flank wear 2007 Neural Computing and Applications 16(4) 407-417
S.K. Gunjal and U.S. Dixit Vibration analysis of shape-optimized rotating cantilever beams 2007 Engineering Optimization 39(1) 105-123
S.R. Hiravennavar, E.G. Tulapurkara, G. Biswas A Note on the Flow and Heat Transfer Enhancement in a Channel with Built-in Winglet Pair 2007 Int. J. Heat and Fluid Flow 28(-) 299-305
S.W.J. Welch and G. Biswas Direct Simulation of Film Boiling Including Electrohydrodynamic Forces 2007 Physics of Fluids 19(-) 1-11
Sukhomay Pal, Surjya K. Pal and Arun K. Samantaray Radial basis function neural network model based prediction of weld-plate distortion due to pulsed metal inert gas welding 2007 Science and Technology of Welding and Joining 12(8) 725-731
T. Roy and D. Chakraborty Delamination in FRP laminates with holes under transverse impact 2007 Materials and Design 29(-) 124-132
V. K. Pantangi, A.S.S.R.K. Kumar, S. C. Mishra and Niranjan Sahoo Performance analysis of domestic LPG cooking stoves with porous media 2007 International Energy Journal 8(-) 139-144
A. K. De and A. Dalal Numerical simulation of unconfined flow past a triangular cylinder 2006 International Journal for Numerical Methods in Fluids 52(7) 801-821
A. K. De and A. Dalal A numerical study of natural convection around a square, horizontal, heated cylinder placed in an enclosure 2006 International Journal of Heat and Mass Transfer 49(23-24) 4608-4623
A. K. De and V. Eswaran Analysis of a new high resolution upwind compact scheme 2006 Journal of Computational Physics 218(1) 398-416
A. K. Singh, S. S. Panda, S. K. Pal and D. Chakraborty Drill Wear Prediction using Artificial Neural Network 2006 International Journal of Advanced Manufacturing Technology 28(5) 456-462
A. Maheshwari, R.P. Chhabra and G. Biswas Effect of Blockage on Drag and Heat Transfer from a Single Sphere and an In-line Array of Three Spheres 2006 Powder Technology 168(-) 74-83
A.Dewan, M. Pathak and A.K.Dass A survey of selected literature on Important flow properties and computational fluid dynamics treatments of incompressible turbulent plane and round jets in quiescent ambient 2006 Indian Journal of Engineering and Materials Sciences 13(-) 180-194
Biswas Pankaj, Mandal N. R. and Sha O. P. Numerical and ANN prediction of thermal history of Submerged Arc Welding 2006 Journal of Mechanical Behavior of Materials 17(4) 269-286
D. Bandopadhya, B. Bhattacharya, A. Dutta Active vibration control using Terfenol-D with H-infinity filter 2006 International Journal of Engineering Modelling 12(-) 1-2
D. Gerlach, G. Tomar, G. Biswas, and F. Durst Comparison of Volume-of- Fluid Methods for Computing Surface Tension-Dominant Two-Phase Flows 2006 International Journal of Heat and Mass Transfer 49(-) 740-754
D. Kumar and U.S. Dixit A slab method study of strain hardening and friction effects in cold foil rolling process 2006 J. Mater. Process. Tech. 171(3) 331-340
D.K. Sonar, U.S. Dixit and D.K. Ojha Application of radial basis function neural network for predicting the surface roughness in turning process 2006 Int. J. Adv. Manuf. Tech. 27(7-8.) 661-666
D.Sarma, S.C., Mishra, P. Mahanta Analysis of collimated radiation in participating media using the discrete transfer method 2006 Journal of Quantitative Spectroscopy and Radiative Transfer 96(1) 123-135
Dalal, A., and Das, M. K. Natural Convection in a Rectangular Cavity Heated from Below and Uniformly Cooled from the Top and Both Sides 2006 Numerical Heat Transfer: Part A 49(3) 301-322
Dalal, A., and Das, M. K. Natural Convection in a Cavity with a Wavy Wall Heated from Below and Uniformly Cooled from the Top and Both Sides 2006 ASME Journal of Heat Transfer 128(7) 717-725
G. Tomar, V. Shankar, S.K. Shukla, A. Sharma, G. Biswas Instability and Dynamics of Thin Viscoelastic Liquid Films 2006 European Physical Journal E 20(-) 185-200
K. Arul Prakash, G. Biswas and B.V. Rathish Kumar Numerical Simulation of the Target System of an ADSS 2006 International Journal of Computational Fluid Dynamics 20(-) 513-520
K. Arul Prakash, G. Biswas and B.V. Rathish Kumar Thermal Hydraulics of the Spallation Target Module of an Accelerator Driven Sub-critical System: A Numerical Study 2006 International Journal of Heat and Mass Transfer 49(-) 4633-4652
K. Arul Prakash, S. De, B.V. Rathish Kumar and G. Biswas A SUPG Finite Element Study of an ADSS 2006 Finite Element in Analysis and Design 42(-) 1123-1136
Kanagaraj S, Varanda FR, Oliveira MSA, Simoes JAO Theoretical model development for nanofluids thermal effectiveness 2006 Defect and Diffusion Forum 258-260(-) 164-171
M. Pathak, A. Dewan and A.K. Dass Computational Prediction of a slightly heated turbulent rectangular jet discharged into a narrow channel crossflow using two different turbulence models 2006 International Journal of Heat and Mass Transfer 49(-) 3914-3928
Manas Das, V.K. Jain, P.S. Ghoshdastidar Computer Simulation of Nanofinishing Process 2006 Directions (Quarterly magazine of IIT Kanpur) 7(3) 23-28
N. Dharmaraju, R. Tiwari and S. Talukdar Identification of an Open Crack Model Parameters in a Cracked Beams 2006 A Special Issue on Rotor Dynamics of Advances in Vibration Engineering 5(4) 323-330
N. Gupta, G.R.  Chaitanya and S.C. Mishra Lattice Boltzmann method applied to variable thermal conductivity conduction and radiation problems 2006 Journal of Thermophysics and Heat Transfer 20(7) 895-902
N. K. Chandiramani Higher-periodic and Aperiodic Stick-slip Dynamics in a Friction Damper 2006 International Journal of Acoustics and Vibrations 11(2) 67-78
N. K. Chandiramani and T. Pothala Dynamics of 2-DOF Regenerative Chatter during Turning 2006 Journal of Sound and Vibration 292(3-Jan) 448-464
N. K. Chandiramani, K. Srinivasan, and J. Nagendra Experimental Study of Stick-Slip Dynamics in a Friction Wedge Damper 2006 Journal of Sound and Vibration 291(2-Jan) 1-18
N. Sahoo, S. Saravanan, G. Jagadeesh and K.P.J. Reddy Simultaneous measurement of aerodynamic and heat transfer data for large angle blunt cones in hypersonic shock tunnel 2006 Academy Proceedings in Engineering Sciences, SADHANA 31(5) 557-581
N.A. Krishna and S.C. Mishra The discrete transfer method applied to the radiative heat transfer in a variable refractive index semitransparent medium 2006 Journal of Quantitative Spectroscopy and Radiative Transfer 102(-) 432-440
N.R.. Abburi and U.S. Dixit A knowledge-based system for the prediction of surface roughness in turning process 2006 Robotics and CIM 22(4) 363-372
P. Mahanta, S.C. Mishra, Y.S. Kushwah A comparative study of pongamiapinnata and jatrophacurcus oil as diesel substitute 2006 International Energy Journal 7(1) 1-11
P. Mahanta, S.C. Mishra, Y.S. Kushwah An experimental study of Pongamiapinnata L. oil as a diesel substitute 2006 Part A: Journal of Power and Energy 220(7) 803-808
Pradeep Gupta, K. Srinivasan and S.V. Prabhu Tests on various configurations of Coriolis mass flowmeters 2006 Measurement 39(4) 296-307
R. Ganesh Narayanan, K. Narasimhan Weld region representation during the simulation of TWB forming behavior 2006 International Journal of Forming Processes 9(4) 491-518
R. Raj, A. Prasad, P.R. Parida and S.C. Mishra Analysis of solidification of a semitransparent planar layer using the lattice Boltzmann method and the discrete transfer method 2006 Numerical Heat Transfer, Part A 49(3) 279-299
R. Tiwari and N. Dharmaraju Development of a condensation scheme for transverse rotational degrees of freedom elimination in identification of beam crack parameters 2006 Mechanical Systems and Signal Processing 20(8) 2148-2170
R. Tiwari and N. Dhawade Localisation and Criticality of a Crack in an Euler-Benaulli Beam Based on Modal Characteristics 2006 Advances in Vibration Engineering 5(3) 175-189
R. Tiwari and V. Chakravarthy Simultaneous Identification of Residual Unbalances and Bearing Dynamic Parameters From Impulse Responses of Rotor-Bearing Systems 2006 Mechanical Systems and Signal Processing 20(7) 1590-1614
Rahul, G. Sandeep, D. Chakarborty and A Dutta Multi-objective Optimization of Hybrid Laminates subjected to Transverse Impact 2006 Composite Structures 73(-) 360-369
Rajkumar MJ, and Saha UK Valve Aided Twisted Savonius Rotor 2006 Journal of Wind Engineering 30(3) 243-253
S Senthilvelan and R Gnanamoorthy Selective Carbon Fiber Reinforced Nylon 66 Spur Gears Development and Performance 2006 Applied Composite Materials 13(1) 43-56
S Senthilvelan and R Gnanamoorthy Damping Characteristics of Unreinforced, Glass and Carbon Fiber Reinforced Nylon 6/6 Spur Gears 2006 Polymer Testing, 25(1) 56-62
S Senthilvelan and R Gnanamoorthy Fiber Reinforcement in Injection Molded Nylon 6/6 Spur Gears 2006 Applied Composite Materials 13(4) 237-248
S Senthilvelan and R Gnanamoorthy Effect of Gear Tooth Fillet Radius on the Performance of Injection Molded Nylon 6/6 Gears 2006 Materials and Design 27(8) 632-639
S Senthilvelan and R Gnanamoorthy Effect of Rotational Speed on the Performance of Unreinforced and Glass Fiber Reinforced Nylon 6 Spur Gears 2006 Materials and Design 28(3) 765-772
S Senthilvelan and R Gnanamoorthy Influence of Reinforcement on Composite Gear Metrology 2006 Mechanism and Machine Theory 43(9) 1198-1209
S. K. Dwivedy and P. Eberhard Dynamic analysis of flexible manipulators, a literature review 2006 Mechanism and Machine Theory 41(-) 749-777
S. K. Kakoty and V. K. Roy Bulk Reaction Modeling of Sound Propagation Through Circular Dissipative Ducts Backed by an Air Gap 2006 Journal of Vibration and Acoustics, Transactions of the ASME 128(6) 699-704
S. R. Deepak and A. Ghosal A note on the diagonalizability and the jordan form of the 4 x 4 homogeneous transformation matrix 2006 Journal of Mechanical Design 128(6) 1343-1348
S. S. Panda, A. K. Singh, D. Chakraborty and S. K. Pal Drill Wear Monitoring using Back Propagation Neural Network 2006 Journal of Materials Processing Technology 172(-) 283-290
S.C. Mishra, H.K. Roy and N. Misra Discrete ordinate method with a new and a simple quadrature scheme 2006 Journal of Quantitative Spectroscopy and Radiative Transfer 101(2) 249-262
S.C. Mishra, M. Stevan, S. Nemoda, P. Talukdar, D. Trimis and F. Durst Heat transfer analysis of a two-dimensional rectangular porous burner 2006 Int. Communications in Heat and Mass Transfer 33(-) 464-474
S.C. Mishra, N. Kaur and H.K. Roy The DOM approach to the collapsed dimension method for solving radiative transport problems with participating media 2006 International Journal of Heat and Mass Transfer 49(1-2.) 30-41
S.C. Mishra, P. Chug, P. Kumar and K. Mitra Development and comparison of the DTM, the DOM and the FVM formulations for the short-pulse laser transport through a participating medium 2006 International Journal of Heat and Mass Transfer 49(11-12.) 1820-1832
Saha UK, and Rajkumar MJ On The Performance Analysis of Savonius Rotor with Twisted Blades 2006 Renewable Energy 31(11) 1776-1788
Satyajit Panda and M. C. Ray Nonlinear analysis of smart functionally graded plates integrated with a layer of piezoelectric fiber reinforced composite 2006 Smart Materials and Structures 15(-) 1595-1604
T. Roy and D. Chakraborty Delamination in Hybrid FRP Laminates under Low Velocity Impact 2006 Journal of Reinforced Plastics and Composites 18(6) 1939-1955
U.S. Dixit, R. Kumar and S.K. Dwivedy Shape optimization of flexible robotic manipulators 2006 ASME Journal of Mechanical Design 128(-) 559-565
V.K. Pantangi and S.C. Mishra Combustion of gaseous hydrocarbon fuels within porous media - a review 2006 Advances in Energy Research 8(-) 455-461
Y. Srinivas, G. Biswas, A.S. Parihar and R. Ranjan Large-Eddy Simulation of High Reynolds Number Turbulent Flow Past a Square Cylinder 2006 Journal of Engineering Mechanics (ASCE) 132(-) 327-335
A. Srivastava, A. Agarwal, D. Chakraborty, A.Dutta Control of Smart Laminated FRP Structures using Artificial Neural Network 2005 Journal of Reinforced Plastics and Composites 24(13) 1353-1364
Anil Bora, P.S. Robi, A.Srinivasan and Ajit L Mujumdar Processing and characterization of ruthenium aluminide alloys by powder metallurgy and solidification techniques 2005 Trans. PMAI 31(-) 1-6
Bisht, H., Gupta, J., Pal, S.K. and Chakraborty, D. Artificial neural network based prediction of flank wear in turning 2005 Int. J. Materials and Product Technology 22(4) 314-328
D. Chakraborty Artificial Neural Network based Delamination Prediction in Laminated Composites 2005 Materials and Design 26(1) 1-7
D. Chakraborty and M. Kumar Response of Laminated Composites under Multiple Impact loading 2005 Journal of Reinforced Plastics and Composites 24(14) 1457-1477
D. Deka, G. Sandeep, D. Chakarborty and A. Dutta Multi-objective Optimization of Laminated Composites using Finite Element Method and Genetic Algorithm 2005 Journal of Reinforced Plastics and Composites 23(3) 273-286
D. Gerlach, G. Biswas, F. Durst and V. Kolobaric Quasi-Static Bubble Formation on Submerged Orifices 2005 International Journal of Heat and Mass Transfer 48(-) 425-438
D.J. Sarma, S.C. Mishra and P. Mahanta Analysis of collimated radiation using the discrete transfer method 2005 Journal of Quantitative Spectroscopy and Radiative Transfer 96(1) 123-135
D.K. Ojha and U.S. Dixit An economic and reliable tool life estimation procedure for turning 2005 J. Adv. Manuf. Tech. 26(7-8.) 726-732
Dalal, A., and Das, M. K. Laminar Natural Convection in an Inclined Complicated Cavity with Spatially Variable Wall Temperature 2005 International Journal of Heat and Mass Transfer 48(14) 2986-3007
G. Biswas Heat Transfer and Fluid Mechanics Related to Turbulent Flow 2005 Annals of the Indian National Academy of Engineering 2(-) 19-25
G. Tomar, G. Biswas, A. Sharma and A. Agrawal Numerical Simulation of Bubble Growth in Film Boiling using CLSVOF Method 2005 Physics of Fluids 17(1) 1-13
J. Srikanth, E.G. Tulapurkara and G. Biswas Large Eddy Simulation of Flow Past Built-In Winglet-Pair in a Rectangular Channel 2005 International Journal of Fluid Mechanics Research 32(-) 310-326
K. Senthil Kumar, E. G. Tulapurkara, G. Biswas and B.H.L. Gowda Reverse Flow in Channel with Obstruction at Entry 2005 Fluid Dynamics Research 37(-) 387-398
M. Pathak, A. Dewan and A.K. Dass An Assessment of Streamline Curvature Effects on the Mixing Region of a Turbulent Plane Jet in Crossflow 2005 Applied Mathematical Modelling 29(-) 711-725
Mahanta P, Saha UK, Dewan A, Kalita P, and Buragohain B Biogas Digester – A Discussion on Factors Affecting Biogas Production and Field Investigation of a Novel Duplex Digester 2005 Journal of Solar Energy Society of India 15(-) 1-12
Muthukumar P, Maiya MP, Murthy SS Experiments on a metal hydride based hydrogen compressor 2005 Int. J. Hydrogen Energy 30(8) 879-892
Muthukumar P, Maiya MP, Murthy SS Experiments on metal hydride based hydrogen storage device 2005 Int. J. Hydrogen Energy 30(15) 1569-1581
N. Sahoo, K. Suryavamshi, K. P. J. Reddy and D. J. Mee Dynamic force balances for short-duration hypersonic testing facilities 2005 Experiments in Fluids 38(-) 606-614
N. Sahoo, V. Kulkarni, S. Saravanan, G. Jagadeesh and K.P.J. Reddy Film cooling effectiveness on a large angle blunt cone flying at hypersonic speed 2005 Physics of Fluids 17(3) 1-11
P. Mahanta, U.K.Saha, A. Dewan, P. Kalita, B. Buragohain Biogas digester: A discussion on factors affecting biogas production and field investigation of a novel duplex digester 2005 Solar Energy Society of India Journal 15(2) 1-12
P. Sahoo, and A. Banerjee Asperity interaction in elastic–plastic contact of rough surfaces in presence of adhesion 2005 Journal of Physics D: Applied Physics 38(-) 2841-2847
P. Sahoo, and A. Banerjee Asperity interaction in adhesive contact of metallic rough surfaces 2005 Journal of Physics D: Applied Physics 38(-) 4096-4103
Pathak M, Kumar PS, and Saha UK Prediction of Off-Design Characteristics of a Gas Turbine Cycle Using Matching Technique 2005 International Journal of Turbo & Jet Engines 22(2) 103-119
R. Tiwari Conditioning of Regression Matrices for Simultaneous Estimation of the Residual Unbalance and Bearing Dynamic Parameters 2005 Mechanical Systems and Signal Processing 19(5) 1082-1095
R. Tiwari and V. Reddy Estimation of Bearing Dynamic Coefficients using Impulse Responses 2005 Advances in Vibration Engineering 4(4) 369-378
R. Tiwari, S. Manikandan, S. K. Dwivedy A review of the experimental estimation of the rotor-dynamic parameters of seals 2005 Shock and Vibration Digest 37(-) 161-284
Rahul, D. Chakraborty and A. Dutta Optimization of FRP laminated Composites using Island Model Parallel genetic Algorithm 2005 Composite Science and Technology 65(-) 2003-2013
Rajkumar MJ, Saha UK, and Maity D Simulation of Flow Around and Behind a Savonius Rotor 2005 International Energy Journal 6(2) 83-90
S Senthilvelan and R Gnanamoorthy Reinforced Polymer Gear Fatigue and Failure Analysis 2005 Transactions Indian Institute of Metals 58(2-3.) 249-253
S Senthilvelan and R Gnanamoorthy Surface Failure Analysis of Unreinforced ,Glass and Carbon Fiber Reinforced Nylon 6/6 Spur Gears 2005 International Journal of Plastics Technology 9(-) 444-452
S. K. Pal and D. Chakraborty Surface roughness prediction in turning using artificial neural network 2005 Neural Computing and Applications 14(-) 319-324
S. Tiwari, D. Chakraborty, G. Biswas and P.K. Panigrahi Numerical Prediction of Flow and Heat Transfer in a Channel in the Presence of a Built-in Circular Tube With and Without Integral Wake Splitter 2005 International Journal of Heat and Mass Transfer 48(-) 439-453
S.C. Mishra and A. Lankadasu Analysis of transient conduction and radiation heat transfer using the lattice Boltzmann method and the discrete transfer method 2005 Numerical Heat Transfer, Part A 47(9) 935-954
S.C. Mishra, A. Lankadasu and K. Beronov Application of the lattice Boltzmann method for solving the energy equation of a 2-D transient conduction-radiation problem 2005 International Journal of Heat and Mass Transfer 48(-) 3648-3659
S.C. Mishra, P. Talukdar, D. Trimis and F. Durst Two-dimensional transient conduction and radiation heat transfer with variable thermal conductivity 2005 Int. Communications in Heat and Mass Transfer 32(-) 305-314
S.C. Mishra, P. Talukdar, D. Trimis and F. Durst Effect of angular quadrature schemes on the computational efficiency of the discrete transfer method for solving radiative transport problems with participating medium 2005 Numerical Heat Transfer, Part B 46(5)