International Conference
1. P.K.Mondal,
S.Mukherjee, P.Mishra, A.Pal and S. Panda,2008, A Graphical Case-Based Approachfor Determination
of Optimum Design parameter of a Cooling Tower, 1st International
Conference on Recent Development in Mechanical Engineering,23-25 January,2008,
SUSCET, Mohali, Paper No. 21, pp 59-62.
2. P.K.Mondal,
A.Chanda, S.Ghoshal, 2008, Numerical Modelling of Micro-Chnnel Heat Transfer with Axial Conduction, 15th ISME,
International Conference on AdvancVol. 30(9)es in Mechanical Engineering,19-21 March,2008, RGTU,
Bhopal, Paper No. 45, pp 65-68.
3. P.K.Mondal,
S.Mukherjee, P.Mishra, A.Pal, and S.Panda,2008, A Case-Based Technique For Determination of Feasible Design parameter
of a Cooling Tower in Different Climatic Conditions, 15th ISME,
International Conference on Advances in Mechanical Engineering,19-21
March,2008, RGTU, Bhopal, Paper No. 34, pp 38-41.
4. P. K. Mondal,
A. Bandopadhyay, D. DasGupta,
U. Ghosh and S. Chakraborty, Contact-line-motion of immiscible fluids over asymmetrically placed
chemical patches in narrow confinement, 5th International and 41st National
Conference on Fluid Mechanics and Fluid Power,12-14 December, 2014 at IIT
Kanpur, FMFP14-H-53.
5. H. Gaikwad,
D. N. Basu and P. K. Mondal,
Irreversibility Analysis of a
Non-Newtonian Liquid Film Falling Down on Inclined Porous Heated Wall,
Proc. Indian Chemical Engineering Congress (CHEMCON), 27-30 December, 2015, IIT
Guwahati, Paper ID FM-103.
6. H. Gaikwad,
D. N. Basu, C. Borele and
P. K. Mondal, EMHD
Micro-Pumping of a Non-Conducting Shear-Thinning Fluid Under EDL Phenomenal,
6th International and 43rd National Conference on Fluid Mechanics and Fluid
Power,15-17 December, 2016 at MNNIT,Allahabad FMFP16
Paper No-43.
7. S. Shyam,
B. Mehta and P. K. Mondal, Thermohydrodynamics of ferrofluidic
flow with periodic pulsation under the effect of static and alternating
magnetic field-: a numerical study, Proceedings of the 16th International
Heat Transfer Conference, IHTC-16 August 10-15, 2018, Beijing, China
IHTC16-23439.
National Conference
1. P.K.Mondal,
S.Mukherjee, A.Chakrabarty,
A.Mukherjee and P.Ghosh,
2007, Performance Variation of Cooling
Tower in Different Season-A Case Study, 34th National Conference on Fluid
Mechanics and Fluid Power, 10-12 Dec, BIT Mesra,
Paper No. 1117, pp 896-899.
2. P.K.Mondal,
S.K.Mandi, G.Kundu, S.Datta and D.Mitra, 2008, Determination of Support Reaction for
Circular Stacks Against Wind Forces, 35th National Conference on Fluid
Mechanics and Fluid Power, 11-13 Dec, PESIT Bangalore, Paper No. 038, pp 358-364.
3. P.K.Mondal,
K.Ghosh, S.Mookherjee and D.Sanyal, 2008, Experimental
Investigation On Thermal Hydraulic Behavior during Molten Fuel Coolant
Interaction, 35th National Conference on Fluid Mechanics and Fluid Power,
11-13 Dec, PESIT Bangalore, Paper No. 037, pp
352-357.
4. P.K.Mondal,
K.Ghosh, D.Sanyal, D.Mukhopadhaya and B.Chatterjee
2008, Numerical Simulation for Small
Break LOCA Analysis of a PHWR, 35th National Conference on Fluid Mechanics
and Fluid Power, 11-13 Dec, PESIT Bangalore, Paper No. 077, pp
651-656.
5. S.Mukherjee,
A. Majumdar, P.K.Mondal, S.Roy, A.Mandal, P. K. Singh, and
T.K.Chongder 2008, An Analytical Study of Sediment Transport Phenomenon and Calculation of
Relevant Parameters for Ideal and Real fluids, 35th National Conference on
Fluid Mechanics and Fluid Power, 11-13 Dec, PESIT Bangalore, Paper No. 017, pp 208-212.
6. P.K.Mondal,
S.Mukherjee 2014, Effect of an applied electric field on the heat transfer
characteristics of a Newtonian fluid in an asymmetrically heated narrow
confinement, 21st State Science and Technology Congress, West Bengal,
Tech_PH_87, Page-321.
Microfluidics
is a Science