Student Guidance at IITG

Ph. D.:

1. P. Janaki Ramulu, Forming behavior of friction stir welded blanks, 2008-2012 (Completed) (Presently at Adama Science and Technology University, Ethiopia)

2. V. Satheesh Kumar, Forming of adhesive bonded steel sheets, 2010-2014 (Completed) (Presently at Dept. of Mechanical Engg., Amrita University, Coimbatore)

3. Arvind K Agrawal, End forming studies on welded and un-welded tubes, 2013 to till date (Ongoing)

4. Pritam K. Rana, FSSW of sandwich sheets (2014 to till date) (Ongoing)

5. Tinu P. Saju, FS forming of Aluminium alooy sheets (2014 to till date) (Ongoing)

6. Saibal K Barick, Forming of sheets through shock tube (2014 to till date) (Ongoing)

M.Tech:

1. Deepak Mylavarapu, Experimental and numerical simulation of self-pierced riveting process (with Dr. Manas Das), 2015-2016

2. Mikel Azkue Egia, Maintenance asset criticality and RAM-LCC analysis: A boiler fleet case study (with Dr. Eduardo Castellano, IKERLAN, Spain), 2015-2016

3. Navjot Singh Sanghu, Impact behavior investigations of GFRP laminate composites (with Dr. P.S. Robi), 2015-2016

4. Yogendra Rajpoot, Cellular Automata Finite Element modeling of friction stir welding of Steel sheets and tool design, 2014-2015

5. Premananda Ekka, Investigation on the end forming of tubes, 2014-2015

6. Sharad R Valvi, CAFE modeling to predict the forming during friction stir welding of Aluminium grades, 2013-2014

7. Avinash Kumar Yadav, Springback of adhesive bonded sheets of similar and dissimilar steel, 2013-2014

8. B.Durga Rao, Formability and springback of friction stir welded sheets made of dissimilar Aluminium alloys, 2012-2013

9. D. Doley, Influence of wire reinforcement on the formability of adhesive bonded steel sheets, 2012-2013

10. Mukesh Kumar, Formability of friction stir welded sheets made of dissimilar materials, 2011-2012

11. R. Saluja, Modelling material heterogeneities in friction stir weld region using Cellular Automata based Finite Element analysis, 2010-11

12. C. Patel, Application of Cellular Automata based and Finite Element analysis to investigate the friction stir welding process, 2010-11

13. Ravikant, Investigation on the forming of adhesive bonded blanks, 2009-10

14. Susanta K. Dey, Computing the tensile behavior of tailor welded blanks by ANN based expert system, 2009-10

15. Nilesh M. Bondre, Weld region representation during the formability prediction of friction stir welded tailored blanks, 2009-10

16. Srinivas B. Naik, Predicting the forming limit of un-welded and tailor welded blanks and experimental validation, 2008-09

17. Abhishek T. Dhumal, An expert system to predict the tensile and deep drawing behavior of tailor welded blanks, 2008-09

18. K. Sivakrishna, An expert system to predict the forming limit of tailor welded blanks, 2008-09

19. K. Veerababu, Prediction of tensile and deep drawing behaviour of tailor welded blanks by artificial neural networks (with G. Saravanakumar), 2007-08

B.Tech.:

1. Ishwar Kapoor, Warm forming of Magnesium alloys, 2015-2016

2. K. Suraj, Wheel chair for handicapped with some innovations, 2015-2016

3. B. Vijay, Wheel chair for handicapped with some innovations, 2015-2016

4. Arun Krishnan, Self Pierced Riveting: Modeling and Analyses, 2014-2015

5. Rupesh Kumar Verma, Self Pierced Riveting: Modeling and Analyses, 2014-2015

6. Vishnu Ganesh, Experimental investigation of the formability of sandwich steel sheets, 2013-2014

7. Ramniwas, Springback investigation of adhesive bonded sheets, 2013-2014

8. Ravi Kumar, Springback investigation of adhesive bonded sheets, 2013-2014

9. Siddhartha Karidi, Springback studies of friction stir welded sheets, 2013-2014

10. Katre Sudhindra Jitendra, Springback studies of friction stir welded sheets, 2013-2014

11. R.V. Siva Nikhil, Alignment of structured and unstructured meshes for internal boundaries (with Dr. G. Saravanakumar), 2007-2008

12. D. Sumanth, Alignment of structured and unstructured meshes for internal boundaries (with Dr. G. Saravanakumar), 2007-2008